Re: Digest Number 16

tmoc1990 · Post by **tmoc1990** » Tue Mar 19, 2002 8:56 am

Kevin, do you have pictures of your sedan you can send me? I also have two
sets of the Mazda wheels that will fit the honda 600 if anybody wants a set
let me know. Hey guys when you have nothing else to look at, the haynes
manual seem to answer alot of questions. Factory manuals are very hard to
find and not cheap in good condition. I enjoy the feedback from everyone on
this site and lets keep it clean not like some other sites I have seen.
Mike O'Connor

fourmusicians93063 · Post by **fourmusicians93063** » Tue Mar 19, 2002 2:20 pm

WHat's a cyclops?
Jamie

>From: tmoc1990@...
>Reply-To: 2cylinderhondas@yahoogroups.com
>To: 2cylinderhondas@yahoogroups.com
>Subject: Re: [2cylinderhondas] Digest Number 16
>Date: Tue, 19 Mar 2002 12:56:26 EST
>Kevin, do you have pictures of your sedan you can send me? I also have two
>sets of the Mazda wheels that will fit the honda 600 if anybody wants a set
>let me know. Hey guys when you have nothing else to look at, the haynes
>manual seem to answer alot of questions. Factory manuals are very hard to
>find and not cheap in good condition. I enjoy the feedback from everyone on
>this site and lets keep it clean not like some other sites I have seen.
>Mike O'Connor

Send and receive Hotmail on your mobile device: Click Here

Plwrentals · Post by **Plwrentals** » Tue Mar 19, 2002 2:43 pm

The Mazda wheel info is really needed here. The rear axle out from
under a Honda 600 makes a great trailer axle for a light duty
trailer. Problem is the tiny tires aren't readily available on the
highway. The 13" wheels of the Mazda will help with this. Mike, I
will get you photos of my car.
Kevin.

--- In 2cylinderhondas@y..., tmoc1990@a... wrote:
> Kevin, do you have pictures of your sedan you can send me? I also
have two
> sets of the Mazda wheels that will fit the honda 600 if anybody
wants a set
> let me know. Hey guys when you have nothing else to look at, the
haynes
> manual seem to answer alot of questions. Factory manuals are very
hard to
> find and not cheap in good condition. I enjoy the feedback from
everyone on
> this site and lets keep it clean not like some other sites I have
seen.
> Mike O'Connor

aahondaowner · Post by **aahondaowner** » Tue Mar 19, 2002 8:29 pm

JAMIE,
IAM NOT THE EXPERT ON A CYCLOPS, BUT ITS A SMALL, ONE CYLINDER, CAR TYPE VEHICLE WITH ONE HEADLITE. THE ENGINE I FOUND ON A SITE, WORKS LIKE AN OIL WELL PUMP.
HAS NO CRANK TO SPEAK OF. THE PISTON GOES UP AND DOWN ON THE ROD, BUT WORKS LIKE A TETERTOTTER. THE OTHER END OF THE ROD TURNS THE SHAFT THAT TURNS THE REAR AXEL. TYPE IN CYCLOPS AND YOUR COMPUTER MIGHT TAKE YOU TO THE SITE, THEN CLICK ARROUND AND YOULL EVENTUALLY FIND ALL THE INFO WE FOUND... MY GRAND DAUGHTER GOT ME STARTED ON THIS PROJECT, AND WE WERE HAVING FUN LOOKING ARROUND FOR IT, THEN I GOT HOOKED, SO HAD TO KNOW MORE AFTER SHE WENT HOME. KEVIN AND I TALKED ON THE MICRO CAR SITE, BUT THEY GOT TO SLINGIN MUD TOO MUCH FOR ME SO I UNSUBSCRIBED...
IF I EVER GET ONE OF THESE LITTLE CARS TOGETHER, ILL PULL IT BEHIND MY AZ COUPE, IF I STILL HAVE IT BY THEN.
JUNKMAN/ALLIANCE, NEBR.

> ----- Original Message -----
> From:
> Jamie St. Louis
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Tuesday, March 19, 2002 4:20
> PM
> Subject:
> Re: [2cylinderhondas] Digest
> Number 16
> WHat's a cyclops?
> Jamie
> >From:
> tmoc1990@...
> >Reply-To:
> 2cylinderhondas@yahoogroups.com
> >To:
> 2cylinderhondas@yahoogroups.com
> >Subject: Re: [2cylinderhondas] Digest Number 16
> >Date: Tue, 19 Mar 2002 12:56:26 EST
> >Kevin, do you have pictures of your sedan you can send me? I > also have two
> >sets of the Mazda wheels that will fit the honda 600 if anybody > wants a set
> >let me know. Hey guys when you have nothing else to look at, > the haynes
> >manual seem to answer alot of questions. Factory manuals are > very hard to
> >find and not cheap in good condition. I enjoy the feedback from > everyone on
> >this site and lets keep it clean not like some other sites I > have seen.
> >Mike O'Connor
> Send and receive Hotmail on your mobile device:
> Click Here
> To
> unsubscribe from this group, send an email
> to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .

fourmusicians93063 · Post by **fourmusicians93063** » Tue Mar 19, 2002 8:56 pm

Hey, Junky
Don't ever get rid of your z unless you want to sell it to me.
Jamie

>From: "junkman"
>Reply-To: 2cylinderhondas@yahoogroups.com
>To:
>Subject: Re: [2cylinderhondas] Digest Number 16
>Date: Tue, 19 Mar 2002 22:29:59 -0700
>JAMIE,
> IAM NOT THE EXPERT ON A CYCLOPS, BUT ITS A SMALL, ONE CYLINDER, CAR TYPE VEHICLE WITH ONE HEADLITE. THE ENGINE I FOUND ON A SITE, WORKS LIKE AN OIL WELL PUMP. HAS NO CRANK TO SPEAK OF. THE PISTON GOES UP AND DOWN ON THE ROD, BUT WORKS LIKE A TETERTOTTER. THE OTHER END OF THE ROD TURNS THE SHAFT THAT TURNS THE REAR AXEL. TYPE IN CYCLOPS AND YOUR COMPUTER MIGHT TAKE YOU TO THE SITE, THEN CLICK ARROUND AND YOULL EVENTUALLY FIND ALL THE INFO WE FOUND... MY GRAND DAUGHTER GOT ME STARTED ON THIS PROJECT, AND WE WERE HAVING FUN LOOKING ARROUND FOR IT, THEN I GOT HOOKED, SO HAD TO KNOW MORE AFTER SHE WENT HOME. KEVIN AND I TALKED ON THE MICRO CAR SITE, BUT THEY GOT TO SLINGIN MUD TOO MUCH FOR ME SO I UNSUBSCRIBED... IF I EVER GET ONE OF THESE LITTLE CARS TOGETHER, ILL PULL IT BEHIND MY AZ COUPE, IF I STILL HAVE IT BY THEN.
> JUNKMAN/ALLIANCE, NEBR.
> ----- Original Message -----
> From: Jamie St. Louis
> To: 2cylinderhondas@yahoogroups.com
> Sent: Tuesday, March 19, 2002 4:20 PM
> Subject: Re: [2cylinderhondas] Digest Number 16
> WHat's a cyclops?
> Jamie
> >From: tmoc1990@...
> >Reply-To: 2cylinderhondas@yahoogroups.com
> >To: 2cylinderhondas@yahoogroups.com
> >Subject: Re: [2cylinderhondas] Digest Number 16
> >Date: Tue, 19 Mar 2002 12:56:26 EST
> >Kevin, do you have pictures of your sedan you can send me? I also have two
> >sets of the Mazda wheels that will fit the honda 600 if anybody wants a set
> >let me know. Hey guys when you have nothing else to look at, the haynes
> >manual seem to answer alot of questions. Factory manuals are very hard to
> >find and not cheap in good condition. I enjoy the feedback from everyone on
> >this site and lets keep it clean not like some other sites I have seen.
> >Mike O'Connor
>------------------------------------------------------------------------------
> Send and receive Hotmail on your mobile device: Click Here
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> To unsubscribe from this group, send an email to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Chat with friends online, try MSN Messenger: Click Here

moohen2 · Post by **moohen2** » Wed Mar 20, 2002 6:31 am

where was that site on cyclops or the name of the site thamks