engine / transmission assembly weight ??

Archived posts from the 2 Cylinder Hondas Yahoo Group
Post Reply
mohavefrank
Posts: 10
Joined: Sat Apr 28, 2007 9:28 pm

engine / transmission assembly weight ??

Post by mohavefrank »

Hi, anyone have an idea of the weight on a 600 powerplant? Complete
with clutch and generator. I'm thinking of selling one and need an idea
of weight for shipping. Thanks ..... Frank
Top
infinkc
Posts: 124
Joined: Tue Apr 27, 2004 1:42 am

Re: engine / transmission assembly weight ??

Post by infinkc »

--- In 2cylinderhondas@yahoogroups.com, "mohavefrank"
wrote:
> Hi, anyone have an idea of the weight on a 600 powerplant? Complete
> with clutch and generator. I'm thinking of selling one and need an idea
> of weight for shipping. Thanks ..... Frank
id say 175-250lbs I was able to pick mine up with one other person and
put it on the back of a truck and im not that big of person. that was
with the subframe attached also.
Top
Miles
Posts: 361
Joined: Mon Aug 04, 2003 5:32 pm

Re: engine / transmission assembly weight 213

Post by Miles »

213 pounds with starter attached. The starter is 11.4 pounds by itself.
You will have to ship it freight such as Matheson or? but it's too
heavy for FedEx or UPS.
Miles
--- In
2cylinderhondas@yahoogroups.com
, "infinkc" wrote:
> --- In
2cylinderhondas@yahoogroups.com
, "mohavefrank"
> wrote:
> > Hi, anyone have an idea of the weight on a 600 powerplant? Complete
> > with clutch and generator. I'm thinking of selling one and need an
> idea
> > of weight for shipping. Thanks ..... Frank
> id say 175-250lbs I was able to pick mine up with one other person
and
> put it on the back of a truck and im not that big of person. that was
> with the subframe attached also.
Top
friend
Posts: 0
Joined: Fri Sep 14, 2012 10:54 pm

Re: engine / transmission assembly weight ??

Post by friend »

No, close but not quite. Dry it comes in at 273 Lbs.
Bill
-----Original Message-----
From: 2cylinderhondas@yahoogroups.com
[mailto:2cylinderhondas@yahoogroups.com]On Behalf Of infinkc
Sent: Friday, May 18, 2007 4:42 PM
To: 2cylinderhondas@yahoogroups.com
Subject: [2cylinderhondas] Re: engine / transmission assembly weight ??
--- In 2cylinderhondas@yahoogroups.com, "mohavefrank"
wrote:
> Hi, anyone have an idea of the weight on a 600 powerplant? Complete
> with clutch and generator. I'm thinking of selling one and need an idea
> of weight for shipping. Thanks ..... Frank
id say 175-250lbs I was able to pick mine up with one other person and
put it on the back of a truck and im not that big of person. that was
with the subframe attached also.
Top
friend
Posts: 0
Joined: Fri Sep 14, 2012 10:54 pm

Re: engine / transmission assembly weight 213

Post by friend »

Miles;
I hate to disagree, but you also have to add the box, I never got any
lower than 40 Lbs on the wooden box.
Bill
-----Original Message-----
From: 2cylinderhondas@yahoogroups.com
[mailto:2cylinderhondas@yahoogroups.com]On Behalf Of Miles
Sent: Saturday, May 19, 2007 1:42 AM
To: 2cylinderhondas@yahoogroups.com
Subject: [2cylinderhondas] Re: engine / transmission assembly weight 213
213 pounds with starter attached. The starter is 11.4 pounds by itself.
You will have to ship it freight such as Matheson or? but it's too
heavy for FedEx or UPS.
Miles
--- In
2cylinderhondas@yahoogroups.com
, "infinkc" wrote:
> --- In
2cylinderhondas@yahoogroups.com
, "mohavefrank"
> wrote:
> > Hi, anyone have an idea of the weight on a 600 powerplant? Complete
> > with clutch and generator. I'm thinking of selling one and need an
> idea
> > of weight for shipping. Thanks ..... Frank
> id say 175-250lbs I was able to pick mine up with one other person
and
> put it on the back of a truck and im not that big of person. that was
> with the subframe attached also.
Top
Miles
Posts: 361
Joined: Mon Aug 04, 2003 5:32 pm

Re: engine / transmission assembly weight 213

Post by Miles »

He only asked the weight of the powerplant and not a box or pallet!
Furthermore according to the big blue shop manual, page 4-1,
Technical data, weight of a Honda -N600 engine is 212.7 lbs including
transmission and differential. But below that spec looks to be a typo
where it should read -A600 reads -600 coming in at 251.4 lbs. The
AA600 engine's gotta weigh more, yo.
________________
Top
friend
Posts: 0
Joined: Fri Sep 14, 2012 10:54 pm

Re: engine / transmission assembly weight 213

Post by friend »

Never sipped or even weighed one. Should be something to look forward to.
-----Original Message-----
From: 2cylinderhondas@yahoogroups.com
[mailto:2cylinderhondas@yahoogroups.com]On Behalf Of Miles
Sent: Sunday, May 20, 2007 2:14 AM
To: 2cylinderhondas@yahoogroups.com
Subject: [2cylinderhondas] Re: engine / transmission assembly weight 213
He only asked the weight of the powerplant and not a box or pallet!
Furthermore according to the big blue shop manual, page 4-1,
Technical data, weight of a Honda -N600 engine is 212.7 lbs including
transmission and differential. But below that spec looks to be a typo
where it should read -A600 reads -600 coming in at 251.4 lbs. The
AA600 engine's gotta weigh more, yo.
________________
--- In 2cylinderhondas@yahoogroups.com, "mohavefrank"
> > wrote:
> > > Hi, anyone have an idea of the weight on a 600 powerplant?
--- In
2cylinderhondas@yahoogroups.com
, wrote:
> Miles;
> I hate to disagree, but you also have to add the box, I never
got any
> lower than 40 Lbs on the wooden box.
> Bill
> -----Original Message-----
> From:
2cylinderhondas@yahoogroups.com
> [mailto:
2cylinderhondas@yahoogroups.com
]On Behalf Of Miles
> Sent: Saturday, May 19, 2007 1:42 AM
> To:
2cylinderhondas@yahoogroups.com
> Subject: [2cylinderhondas] Re: engine / transmission assembly
weight 213
> 213 pounds with starter attached. The starter is 11.4 pounds by
itself.
> You will have to ship it freight such as Matheson or? but it's too
> heavy for FedEx or UPS.
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, "infinkc"
wrote:
> > --- In
2cylinderhondas@yahoogroups.com
, "mohavefrank"
> > wrote:
> > > Hi, anyone have an idea of the weight on a 600 powerplant?
Complete
> > > with clutch and generator. I'm thinking of selling one and
need an
> > idea
> > > of weight for shipping. Thanks ..... Frank
> > id say 175-250lbs I was able to pick mine up with one other
person
> and
> > put it on the back of a truck and im not that big of person.
that was
> > with the subframe attached also.
Top
Jessica Lynch
Posts: 7
Joined: Thu Mar 22, 2007 4:22 am

Re: engine / transmission assembly weight 213

Post by Jessica Lynch »

Hey who mentioned in an earlier email that they had a motor to sell
for a '71/'72 6oo?
i'm interested,
i provided and email below to respond to off of the boards...
Thanks!
jessica lynch
jlynch@...
On May 20, 2007, at 11:35 PM, wrote:
> Never sipped or even weighed one. Should be something to look
> forward to.
> -----Original Message-----
> From:
2cylinderhondas@yahoogroups.com
> [mailto:
2cylinderhondas@yahoogroups.com
]On Behalf Of Miles
> Sent: Sunday, May 20, 2007 2:14 AM
> To:
2cylinderhondas@yahoogroups.com
> Subject: [2cylinderhondas] Re: engine / transmission assembly
> weight 213
> He only asked the weight of the powerplant and not a box or pallet!
> Furthermore according to the big blue shop manual, page 4-1,
> Technical data, weight of a Honda -N600 engine is 212.7 lbs including
> transmission and differential. But below that spec looks to be a typo
> where it should read -A600 reads -600 coming in at 251.4 lbs. The
> AA600 engine's gotta weigh more, yo.
> ________________
> --- In
2cylinderhondas@yahoogroups.com
, "mohavefrank"
> > > wrote:
> > > > Hi, anyone have an idea of the weight on a 600 powerplant?
> --- In
2cylinderhondas@yahoogroups.com
, wrote:
> > Miles;
> > I hate to disagree, but you also have to add the box, I never
> got any
> > lower than 40 Lbs on the wooden box.
> > Bill
> > -----Original Message-----
> > From:
2cylinderhondas@yahoogroups.com
> > [mailto:
2cylinderhondas@yahoogroups.com
]On Behalf Of Miles
> > Sent: Saturday, May 19, 2007 1:42 AM
> > To:
2cylinderhondas@yahoogroups.com
> > Subject: [2cylinderhondas] Re: engine / transmission assembly
> weight 213
> > 213 pounds with starter attached. The starter is 11.4 pounds by
> itself.
> > You will have to ship it freight such as Matheson or? but it's too
> > heavy for FedEx or UPS.
> > Miles
> > --- In
2cylinderhondas@yahoogroups.com
, "infinkc"
> wrote:
> > > --- In
2cylinderhondas@yahoogroups.com
, "mohavefrank"
> > > wrote:
> > > > Hi, anyone have an idea of the weight on a 600 powerplant?
> Complete
> > > > with clutch and generator. I'm thinking of selling one and
> need an
> > > idea
> > > > of weight for shipping. Thanks ..... Frank
> > > id say 175-250lbs I was able to pick mine up with one other
> person
> > and
> > > put it on the back of a truck and im not that big of person.
> that was
> > > with the subframe attached also.
Top
Post Reply

Return to “2 Cylinder Hondas — Yahoo Archive”