E-bay sedan 170172629447

riceburner006 · Post by **riceburner006** » Sun Nov 25, 2007 4:33 pm

Does anybody know what these wheels are? He says they are 12" steel.
The only 12" wheels I was able to find to fit the 600 are some Quad
rims,but they are too wide(7") riceburner006

Mark Kuran · Post by **Mark Kuran** » Sun Nov 25, 2007 7:26 pm

They look to me that they could possibly be Fiat? Maybe a 127 or 128
model? Not sure if you guys in the US had them. We had them here in
Australia in small volumes and I think that they had 12 inch wheels.
Mark.

friend · Post by **friend** » Sun Nov 25, 2007 10:03 pm

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Mark Kuran > Sent:
> Sunday, November 25, 2007 7:26
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] Re: E-bay sedan 170172629447
> They look to me that they could possibly be Fiat? Maybe a 127 or 128
> model? Not sure if you guys in the US had them. We had them here in
> Australia in small volumes and I think that they had 12 inch > wheels.
> Mark.
> --- In
> 2cylinderhondas@ yahoogroups. com
> ,
> "riceburner006"
> wrote:
> > Does
> anybody know what these wheels are? He says they are 12" steel.
> > The
> only 12" wheels I was able to find to fit the 600 are some Quad
> rims,but they are too wide(7") riceburner006

friend · Post by **friend** » Sun Nov 25, 2007 10:31 pm

Just as Rice burner says, there are wheels that will fit from a off road application Quad cycle. However these are not DOT approved and not for use on public roads. There is a company that will make any size wheel you want, but they are not DOT approved and if you tell them that they are going on a car driven on public roads they won't sell them to you. These cars are a lot of fun, but they have to be safe too.
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > billmyong@...
> Sent:
> Sunday, November 25,
> 2007 10:02 PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> RE: [2cylinderhondas] Re: E-bay sedan 170172629447
> > -----Original Message-----
> > From:
> > 2cylinderhondas@ yahoogroups. com
> > [mailto:2cylinderho ndas@yahoogroups .com]
> > On Behalf Of
> > Mark
> > Kuran
> > Sent:
> > Sunday, November 25, 2007 7:26 PM
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > Subject:
> > [2cylinderhondas] Re: E-bay sedan 170172629447
> > They look to me that they could possibly be Fiat? Maybe a 127 or 128
> > model? Not sure if you guys in the US had them. We had them here in
> > Australia in small volumes and I think that they had 12 inch > > wheels.
> > Mark.
> > --- In
> > 2cylinderhondas@ yahoogroups. com
> > ,
> > "riceburner006"
> > wrote:
> > Does anybody know what these wheels are? He says they are 12" steel.
> > > The only 12" wheels I was able to find to fit the 600 are some Quad
> > > rims,but they are too wide(7")
> > riceburner006

friend · Post by **friend** » Sun Nov 25, 2007 10:32 pm

Just as Rice burner says, there are wheels that will fit from a off road application Quad cycle. However these are not DOT approved and not for use on public roads. There is a company that will make any size wheel you want, but they are not DOT approved and if you tell them that they are going on a car driven on public roads they won't sell them to you. These cars are a lot of fun, but they have to be safe too.
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Mark Kuran > Sent:
> Sunday, November 25, 2007 7:26
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] Re: E-bay sedan 170172629447
> They look to me that they could possibly be Fiat? Maybe a 127 or 128
> model? Not sure if you guys in the US had them. We had them here in
> Australia in small volumes and I think that they had 12 inch > wheels.
> Mark.
> --- In
> 2cylinderhondas@ yahoogroups. com
> ,
> "riceburner006"
> wrote:
> > Does
> anybody know what these wheels are? He says they are 12" steel.
> > The
> only 12" wheels I was able to find to fit the 600 are some Quad
> rims,but they are too wide(7") riceburner006

Miles · Post by **Miles** » Mon Nov 26, 2007 2:14 am

Those are horrible looking wheels. Doubt they are for a Quad, they
look like Subaru Brat rims, but besides Mazda rims, I don't know what
else is 4 x 110mm.
Miles

--- In
2cylinderhondas@yahoogroups.com
, wrote:
> Just as Rice burner says, there are wheels that will fit from a off
road
> application Quad cycle. However these are not DOT approved and not
for use
> on public roads. There is a company that will make any size wheel
you want,
> but they are not DOT approved and if you tell them that they are
going on a
> car driven on public roads they won't sell them to you. These cars
are a
> lot of fun, but they have to be safe too.
> Bill
> -----Original Message-----
> From:
2cylinderhondas@yahoogroups.com
> [mailto:
2cylinderhondas@yahoogroups.com
]On Behalf Of Mark Kuran
> Sent: Sunday, November 25, 2007 7:26 PM
> To:
2cylinderhondas@yahoogroups.com
> Subject: [2cylinderhondas] Re: E-bay sedan 170172629447
> They look to me that they could possibly be Fiat? Maybe a 127 or
128
> model? Not sure if you guys in the US had them. We had them here
in
> Australia in small volumes and I think that they had 12 inch
wheels.
> Mark.
> --- In
2cylinderhondas@yahoogroups.com
, "riceburner006"
> wrote:
> > Does anybody know what these wheels are? He says they are 12"
steel.
> > The only 12" wheels I was able to find to fit the 600 are some
Quad
> > rims,but they are too wide(7") riceburner006

Gary Evans · Post by **Gary Evans** » Mon Nov 26, 2007 10:58 am

Those are Ford Fiesta wheels circa 1980. Interesting - I did not know they would fit a 600.
Photo of fiesta with those wheels:
http://www.edmunds.com/media/editorial/ ... ford.fiest
a.500.jpg
-Gary

--- In
2cylinderhondas@yahoogroups.com
, "Miles" wrote:
> Those are horrible looking wheels. Doubt they are for a Quad, they
> look like Subaru Brat rims, but besides Mazda rims, I don't know what
> else is 4 x 110mm.
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, wrote:
> > Just as Rice burner says, there are wheels that will fit from a off
> road
> > application Quad cycle. However these are not DOT approved and not
> for use
> > on public roads. There is a company that will make any size wheel
> you want,
> > but they are not DOT approved and if you tell them that they are
> going on a
> > car driven on public roads they won't sell them to you. These cars
> are a
> > lot of fun, but they have to be safe too.
> > Bill
> > -----Original Message-----
> > From:
2cylinderhondas@yahoogroups.com
> > [mailto:
2cylinderhondas@yahoogroups.com
]On Behalf Of Mark Kuran
> > Sent: Sunday, November 25, 2007 7:26 PM
> > To:
2cylinderhondas@yahoogroups.com
> > Subject: [2cylinderhondas] Re: E-bay sedan 170172629447
> > They look to me that they could possibly be Fiat? Maybe a 127 or
> 128
> > model? Not sure if you guys in the US had them. We had them here
> in
> > Australia in small volumes and I think that they had 12 inch
> wheels.
> > Mark.
> > --- In
2cylinderhondas@yahoogroups.com
, "riceburner006"
> > wrote:
> > > Does anybody know what these wheels are? He says they are 12"
> steel.
> > > The only 12" wheels I was able to find to fit the 600 are some
> Quad
> > > rims,but they are too wide(7") riceburner006

recounts · Post by **recounts** » Tue Nov 27, 2007 7:34 am

Unless I am mistaken those are wheels off a Ford Fiesta - and they
are 4 x 108mm IIRC. Close enough to "fit" onto the car, but
definitely unsafe.
The only other 4 x 110 wheels I know of are the Mazda RX7s and they are
13" and up....