Looking for 600!

[mikeschropp]

Hi, I was recommended to this group by one of its helpful members. I
am looking to pick up a 600 to either get into a drivable condition
or to purchase already in running condition.
I am a mechanic and engine builder so getting the car running should
not be that big of an issue if the car needs some TLC. Anyways I am
open to anything. I am in Michigan and ideally would prefer something
close to me to get but I am willing to look across the US and Canada
to find something that works.
Thanks
Mike

[incompliable711]

Hello, I am in southern MN. I recently bought a 1971 N600 and I love
it. The only problem is that 3 months after I bought it, my wife
got pregnant and now I'm sadly looking to sell it. It runs, drives,
and looks pretty good. It's by no means is flawless, but for a car
it's age it's in really good shape. It has somewhere around 80,000
miles on it, (I'll have to go look to get an exact number) It's red
w/ black interior, has new tires, I guess the guy I bought it from
had the seats re-apholstered, it has the factory option aluminum
wheels. I haven't had to do a whole lot to it. I rebuilt the carb,
adjusted the points, replaced all the exhaust gaskets and rebuilt
the manifold heater as the 37 year old sheet metal wasn't fairing the
greatest. Blows great heat now. I'm only looking to get out of her
what I've got into her, and that's $3600. If you are interested we
could work out some way to meet in the middle somewhere, (for the
cost of gas) if you are interested e-mail me at javman03@... and
I'll send you some pictures. Thanks and good luck in your quest,
Derrick.
(P.S. She came from down south and has never seen salt so there
isn't any rust to speak of, just incase you were worried about the
Minnesota part))

[Paige Hunt]

hi, mike--
paige from california here--
GOOD NEWS FOR YOU!!!
if you go to craigslist in northern michigan, you'll find a posting from a guy named jake who has THREE COUPES!!! and a BUNCH of parts!!! 2 of the coupes are non-rusty from california!!!--ONE actually runs!!!
A GOLD MINE!!!
only 3,900 bucks for the ENTIRE package!!!
1-XXX-XXX-XXXX is Jake's number--
I'D CALL HIM YESTERDAY IF I WERE YOU!!!
this won't last long
you'll be able to make a really nice coupe AND re-coup ALL your money by selling off the spares!!!
you're welcome
paige mikeschropp wrote:

> Hi, I was recommended to this group by one of its helpful members. I > am looking to pick up a 600 to either get into a drivable condition > or to purchase already in running condition.
> I am a mechanic and engine builder so getting the car running should > not be that big of an issue if the car needs some TLC. Anyways I am > open to anything. I am in Michigan and ideally would prefer something > close to me to get but I am willing to look across the US and Canada > to find something that works.
> Thanks
> Mike
Paige Hunt
325 Benton St.
Santa Rosa, CA 95401
XXX-XXX-XXXX
XXX-XXX-XXXX

[Paige Hunt]

Hi again, mike--
there's also a project coupe in the detroit area--a blue one--runs, but is rusty--i don't recommend it, but it's only 750 bucks--
again on craigslist--check it out--
paige mikeschropp wrote:

> Hi, I was recommended to this group by one of its helpful members. I > am looking to pick up a 600 to either get into a drivable condition > or to purchase already in running condition.
> I am a mechanic and engine builder so getting the car running should
> not be that big of an issue if the car needs some TLC. Anyways I am > open to anything. I am in Michigan and ideally would prefer something > close to me to get but I am willing to look across the US and Canada > to find something that works.
> Thanks
> Mike
Paige
Hunt
325 Benton St.
Santa Rosa, CA 95401
XXX-XXX-XXXX
XXX-XXX-XXXX

[Timothy]

--- In 2cylinderhondas@yahoogroups.com, Paige Hunt
wrote:

> Hi again, mike--
> there's also a project coupe in the detroit area--a blue one--

runs, but is rusty--i don't recommend it, but it's only 750 bucks--

> again on craigslist--check it out--
> paige
> mikeschropp wrote:
> Hi, I was recommended to this group by one of its helpful members. I
> am looking to pick up a 600 to either get into a drivable condition
> or to purchase already in running condition.
> I am a mechanic and engine builder so getting the car running should
> not be that big of an issue if the car needs some TLC. Anyways I am
> open to anything. I am in Michigan and ideally would prefer something
> close to me to get but I am willing to look across the US and Canada
> to find something that works.
> Thanks
> Mike
> Paige Hunt
> 325 Benton St.
> Santa Rosa, CA 95401
> XXX-XXX-XXXX
> XXX-XXX-XXXX

I Have A 1972 Honda 600 in very restorable condition,posted it awhile
back,the car is partially restored,it runs but needs battery,also
have many extra parts,loooking to get 1500.00,contact me at
tmaylock@... for more details