to have enough CFM to keep the engine cool?
I am in a pretty warm area as we get 100+ for most of the summer,
although I probably wont drive the car then since it doesn't have A/C
but I would like to drive it when it is around 90 out.
I would like to stay with the original set up since that was how it
was designed, but the electric fan is an interesting option.
Mike
--- In
2cylinderhondas@yahoogroups.com
, "Miles" wrote:
> Yes, exactly the one. Just cut off a majority of the sheetmetal
until
> you have 3 mounting tabs, drill the tabs & housing in 3 places. On
> mine, I also cut about 1 1/2" off the housing at the back to give
it
> a lower profile.
> Maybe we can get Betsy H. in Savannah to send a photo, I don't have
> one.
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, "Mike and Tami Speer"
> wrote:
> > Was it something like this Miles?
http://cgi.ebay.com/ebaymotors/77-Honda ... 0-GL-1000-
> Cooling-Fan_
> > W0QQitemZ230200297573QQcmdZViewItem
> > _____
> > From:
2cylinderhondas@yahoogroups.com
> > [mailto:
2cylinderhondas@yahoogroups.com
] On Behalf Of Miles
> > Sent: Wednesday, September 03, 2008 8:16 PM
> > To:
2cylinderhondas@yahoogroups.com
> > Subject: [2cylinderhondas] Re: In need of a cooling fan
> > I used one from a Honda GL1000 about a 1975 Vintage. Bust out the
> > veins and it bolts right in using it's original sheetmetal
housing
> > parts. I used mine for 20 years, I think I let it go with either
> > Dinky or my 600 pick up truck.
> > The GL1000 blade is just the right size. The fan will run either
> > direction.
> > P.S. Free Decal for attendees, day of the Meet !
> > Miles
> > --- In 2cylinderhondas@
> > yahoogroups.com, Kevin Lister
> > wrote:
> > > Doug,
> > > What is the electric fan out of? A car? A big bike?
> > > kev
> > > --- On Tue, 9/2/08, Mike and Tami Speer wrote:
> > > From: Mike and Tami Speer
> > > Subject: RE: [2cylinderhondas] Re: In need of a cooling fan
> > > To: 2cylinderhondas@
> > yahoogroups.com
> > > Date: Tuesday, September 2, 2008, 7:15 PM
> > > Thanks Doug,
> > > That is an interesting idea if I can find one small enough
and
> > with a good CFM rating.
> > > Mike
> > > From: 2cylinderhondas@ yahoogroups. com [mailto:2cylinderho
> > ndas@yahoogroups .com] On Behalf Of doug3742
> > > Sent: Tuesday, September 02, 2008 2:28 PM
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Subject: [2cylinderhondas] Re: In need of a cooling fan
> > > --- In 2cylinderhondas@ yahoogroups. com, "geez_tech" > wrote:
> > > > Hi All,
> > > > Does anyone here have a good used cooling fan for the engine
> > laying
> > > > around?
> > > > I found mine to be missing half of a blade.
> > > > Mike
> > > > Hi Mike You could use A electric fan remove the old
fan ,pulley
> > > mount electric fan in its place no belts needed worked for
me.You
> > may
> > > gain a little horse power.
> > > No virus found in this incoming message.
> > > Checked by AVG -
http://www.avg
com
> > > Version: 8.0.169 / Virus Database: 270.6.15/1648 - Release
Date:
> > 9/2/2008 5:29 PM
> > No virus found in this incoming message.
> > Checked by AVG -
http://www.avg.com
> > Version: 8.0.169 / Virus Database: 270.6.15/1648 - Release Date:
> 9/3/2008
> > 4:13 PM