As I watch the video 5 more times, the speedo is sedan, the combo
gauge is sedan, the tach is coupe, the clock is Jeco original issue
accessory. Somebody's accessory steering wheel with Coupe horn
button. The car is a '71 with the synchro trans - I can tell by the
door panels and side stainless steel trim strips on the body. It has
the '71 style brake booster with the breather on the bottom, it has
the heater blower knob on the dash not the integrated switch into the
under dash vent control. It has the later model carb not the early
diaphram carb. I bet it has the seats with the tilt knobs on the
sides?
Watch my You Tube Video you will see the 2nd image is what your crank
rod will look like if you took it apart. Farther into the video is
the matching rod journal.
http://www.youtube.com/watch?v=XABHMwrZ0S8&NR=1
Miles
your help is needed
-
kristoferdahl
- Posts: 15
- Joined: Wed Oct 24, 2007 5:05 am
Re: your help is needed
I haven't taken one of these motors apart yet... Do they run roller> Watch my You Tube Video you will see the 2nd image is what your crank
> rod will look like if you took it apart. Farther into the video is
> the matching rod journal.
bearings or plain/journal style?