Sedab Dash Question

Archived posts from the 2 Cylinder Hondas Yahoo Group
Post Reply
juniselect
Posts: 38
Joined: Sat Oct 25, 2008 8:48 am

Sedab Dash Question

Post by juniselect »

I have a dash that has been modified by a previous owner. They added tachs and other gadgets that made the car uniquly their own. Unfortunately, this included cutting of the original plastic and has set it far from stock. My task is to now try and track down replacements. But I am not sure if components of the dash can be swapped out, or if it is one single piece of plastic. This is mostly because I haven't fully removed the dash out of the sedan yet. Can the group offer any suggestions or a "how to" on removing the dash?
Thanks
Marty
San Francisco, CA
CHEYENNE FLETCHER
Posts: 32
Joined: Mon May 03, 2010 1:53 am

Re: Sedab Dash Question

Post by CHEYENNE FLETCHER »

That is the same thing I was wondering. The one I have the plastic is un touched but the pad is messed up.
> ----- Original Message -----
> From:
> juniselect
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Monday, October 18, 2010 1:10
> PM
> Subject:
> [2cylinderhondas] Sedab Dash
> Question
> I have a dash that has been modified by a previous owner. They added tachs > and other gadgets that made the car uniquly their own. Unfortunately, this > included cutting of the original plastic and has set it far from stock. My > task is to now try and track down replacements. But I am not sure if > components of the dash can be swapped out, or if it is one single piece of > plastic. This is mostly because I haven't fully removed the dash out of the > sedan yet. Can the group offer any suggestions or a "how to" on removing the > dash?
> Thanks
> Marty
> San Francisco, CA
Post Reply