Re: Honda n600 0-60 mph Disaster IGN PICS

dean m · Post by **dean m** » Mon Jan 06, 2014 4:30 pm

here it is martek products , I don't think they are around anymore to bad this set up works so sweet along with my z coupe engine with Hawaiian head zoom zoom .... p.s. what app is the gps you have on your phone I gotta get that cheers Dean
--------------------------------------------

On Mon, 1/6/14, Mark P Hatten wrote:
Subject: [2cylinderhondas] Honda n600 0-60 mph Disaster
To: "Arcane Autos Yahoo group" wrote:
�
Good luck on the next speed
run!
Ken
��
��
Great tips Ken ! Hindsight is always
20-20.
�
Mark
www.mphspecialties.com
�
To:
Arcane_autos@yahoogroups.com
From:
citbuff@...
Date: Mon, 6 Jan 2014
09:07:13 -0800
Subject: Re: [Arcane_autos]
Honda n600 0-60 mph Disaster
�
Mark, you can't trust suction cups
unless you GREASE the surface - that REALLY makes them stick
- dry just doesn't work that well! �And how about
putting a piece of duct tape over the card door?? �At
least then you'd have the video.
Ken
��
��
�
it's always
something....
�
https://www.youtube.com/watch?v=X1fhp3Z7zo4
�
Mark
Portland Or.
www.mphspecialties.com

dean m · Post by **dean m** » Mon Jan 06, 2014 4:40 pm

http://www.ebay.com/itm/NOS-Martek-Elec ... 33&vxp=mtr
ah ha goldwing ignition ..... here is one on ebay
--------------------------------------------

On Mon, 1/6/14, dean m wrote:
Subject: Re: [2cylinderhondas] Honda n600 0-60 mph Disaster IGN PICS [2 Attachments]
To:
2cylinderhondas@yahoogroups.com
Date: Monday, January 6, 2014, 4:29 PM
�
[Attachment(s) from dean m included
below]
here it is martek products , I don't think they
are around anymore to bad this set up works so sweet along
with my z coupe engine with Hawaiian head zoom zoom ....
p.s. what app is the gps you have on your phone I gotta get
that cheers Dean
--------------------------------------------
On Mon, 1/6/14, Mark P Hatten wrote:
�
Good luck on the next speed
run!
Ken
��
��
Great tips Ken ! Hindsight is always
20-20.
�
Mark
www.mphspecialties.com
�
To:
Arcane_autos@yahoogroups.com
From:
citbuff@...
Date: Mon, 6 Jan 2014
09:07:13 -0800
Subject: Re: [Arcane_autos]
Honda n600 0-60 mph Disaster
�
Mark, you can't trust suction cups
unless you GREASE the surface - that REALLY makes them
stick
- dry just doesn't work that well! �And how about
putting a piece of duct tape over the card door?? �At
least then you'd have the video.
Ken
��
��
�
it's always
something....
�
https://www.youtube.com/watch?v=X1fhp3Z7zo4
�
Mark
Portland Or.
www.mphspecialties.com

Charles Gould · Post by **Charles Gould** » Mon Jan 06, 2014 5:01 pm

Isn't the Gold Wing a 4 cylinder? Can this still be wired to work on the Honda two cylinder?

On Jan 6, 2014, at 7:40 PM, dean m wrote:
> http://www.ebay.com/itm/NOS-Martek-Elec ... 33&vxp=mtr
> ah ha goldwing ignition ..... here is one on ebay
> --------------------------------------------
> On Mon, 1/6/14, dean m wrote:
> Subject: Re: [2cylinderhondas] Honda n600 0-60 mph Disaster IGN PICS [2 Attachments]
> To: 2cylinderhondas@yahoogroups.com
> Date: Monday, January 6, 2014, 4:29 PM
> [Attachment(s) from dean m included
> below]
> here it is martek products , I don't think they
> are around anymore to bad this set up works so sweet along
> with my z coupe engine with Hawaiian head zoom zoom ....
> p.s. what app is the gps you have on your phone I gotta get
> that cheers Dean
> --------------------------------------------
> On Mon, 1/6/14, Mark P Hatten
> wrote:
> Subject: [2cylinderhondas] Honda n600 0-60 mph Disaster
> To: "Arcane Autos Yahoo group"
>
> Date: Monday, January 6, 2014, 1:15 PM
> Hi Richard,
> The Honda 600's rev up good like any good Honda
> should.
> They have 37 hp. with roller crank bearings and a overhead
> camshaft. This one has straight pipe exhaust. They
> stop making power at 7500-8000 rpm due to point float. Oh
> how I wish there was a Pertronix Electronic Ignition
> kit available.
> Why there is no electronic Ignition kits for the Honda
> 600's I am totally dumbfounded
> Mark
> www.mphspecialties.com
> Well that was dramatic. Nice car though.
> How are you getting 8k rpm? The bullet mirrors must
> contribute a lot to the smooth ride.
> On Monday, January
> 6, 2014 9:37 AM, Kenneth Nelson
> wrote:
> Good luck on the next speed
> run!
> Ken
> Great tips Ken ! Hindsight is always
> 20-20.
> Mark
> www.mphspecialties.com
> To:
> Arcane_autos@yahoogroups.com
> From:
> citbuff@...
> Date: Mon, 6 Jan 2014
> 09:07:13 -0800
> Subject: Re: [Arcane_autos]
> Honda n600 0-60 mph Disaster
> Mark, you can't trust suction cups
> unless you GREASE the surface - that REALLY makes them
> stick
> - dry just doesn't work that well! And how about
> putting a piece of duct tape over the card door?? At
> least then you'd have the video.
> Ken
> it's always
> something....
> https://www.youtube.com/watch?v=X1fhp3Z7zo4
> Mark
> Portland Or.
> www.mphspecialties.com

Mark P Hatten · Post by **Mark P Hatten** » Mon Jan 06, 2014 5:05 pm

Dean,
That electronic ignition set up for the Honda 600 is the "cats meow" !!!
You say it is Martek Products ???
Man I wish I could get a couple . I really want one .
The app is call GPS speed free for Android
Mark
www.mphspecialties.com
To: 2cylinderhondas@yahoogroups.com From: lt1ski@...
Date: Mon, 6 Jan 2014 16:29:46 -0800 Subject: Re: [2cylinderhondas] Honda n600 0-60 mph Disaster IGN PICS [2 Attachments]
[ Attachment(s) from dean m included below]
here it is martek products , I don't think they are around anymore to bad this set up works so sweet along with my z coupe engine with Hawaiian head zoom zoom .... p.s. what app is the gps you have on your phone I gotta get that cheers Dean
--------------------------------------------

On Mon, 1/6/14, Mark P Hatten wrote:
Subject: [2cylinderhondas] Honda n600 0-60 mph Disaster
To: "Arcane Autos Yahoo group"
Date: Monday, January 6, 2014, 1:15 PM
Hi Richard,
The Honda 600's rev up good like any good Honda should.
They have 37 hp. with roller crank bearings and a overhead
camshaft. This one has straight pipe exhaust. They
stop making power at 7500-8000 rpm due to point float. Oh
how I wish there was a Pertronix Electronic Ignition
kit available.
Why there is no electronic Ignition kits for the Honda
600's I am totally dumbfounded
Mark
www.mphspecialties.com
Well that was dramatic. Nice car though.
How are you getting 8k rpm? The bullet mirrors must
contribute a lot to the smooth ride.
On Monday, January
6, 2014 9:37 AM, Kenneth Nelson
wrote:
Good luck on the next speed
run!
Ken
Great tips Ken ! Hindsight is always
20-20.
Mark
www.mphspecialties.com
To:
Arcane_autos@yahoogroups.com
From:
citbuff@...
Date: Mon, 6 Jan 2014
09:07:13 -0800
Subject: Re: [Arcane_autos]
Honda n600 0-60 mph Disaster
Mark, you can't trust suction cups
unless you GREASE the surface - that REALLY makes them stick
- dry just doesn't work that well! And how about
putting a piece of duct tape over the card door?? At
least then you'd have the video.
Ken
it's always
something....
https://www.youtube.com/watch?v=X1fhp3Z7zo4
Mark
Portland Or.
www.mphspecialties.com

dean m · Post by **dean m** » Mon Jan 06, 2014 6:24 pm

someone did it to my car .....
--------------------------------------------

On Mon, 1/6/14, Charles Gould wrote:
Subject: Re: [2cylinderhondas] Honda n600 0-60 mph Disaster IGN PICS
To:
2cylinderhondas@yahoogroups.com
Date: Monday, January 6, 2014, 5:01 PM
�
Isn't the Gold Wing a 4 cylinder? Can this
still be wired to work on the Honda two cylinder?
On Jan 6, 2014, at 7:40 PM, dean m wrote:
�
http://www.ebay.com/itm/NOS-Martek-Elec ... 33&vxp=mtr
ah ha goldwing ignition ..... here is one on ebay
--------------------------------------------
On Mon, 1/6/14, dean m wrote:
Subject: Re: [2cylinderhondas] Honda n600 0-60 mph Disaster
IGN PICS [2 Attachments]
To:
2cylinderhondas@yahoogroups.com
Date: Monday, January 6, 2014, 4:29 PM
�
[Attachment(s) from dean m included
below]
here it is martek products , I don't think they
are around anymore to bad this set up works so sweet along
with my z coupe engine with Hawaiian head zoom zoom ....
p.s. what app is the gps you have on your phone I gotta
get
that cheers Dean
--------------------------------------------
On Mon, 1/6/14, Mark P Hatten wrote:
�
Good luck on the next speed
run!
Ken
��
��
Great tips Ken ! Hindsight is always
20-20.
�
Mark
www.mphspecialties.com
�
To:
Arcane_autos@yahoogroups.com
From:
citbuff@...
Date: Mon, 6 Jan 2014
09:07:13 -0800
Subject: Re: [Arcane_autos]
Honda n600 0-60 mph Disaster
�
Mark, you can't trust suction cups
unless you GREASE the surface - that REALLY makes them
stick
- dry just doesn't work that well! �And how
about
putting a piece of duct tape over the card door??
�At
least then you'd have the video.
Ken
��
��
�
it's always
something....
�
https://www.youtube.com/watch?v=X1fhp3Z7zo4
�
Mark
Portland Or.
www.mphspecialties.com

dwb_07 · Post by **dwb_07** » Tue Jan 07, 2014 8:01 am

Here are installation instructions and an address.
http://www.650motorcycles.com/Martek.html
Mark. what are you looking for? For the price of that part you can build a complete ECU and completely control your timing. Add a few sensors and fuel injection. I got my Megasquirt kit for $207. I used it to run timing only with a carburetor.

Mark P Hatten · Post by **Mark P Hatten** » Tue Jan 07, 2014 12:30 pm

I personally think Honda 600 contact point sets are dark age technology and just wanted to get rid of my points and associated high RPM point float. I spearheaded the Pertronix electronic ignition for the two stroke Subaru 360's and Suzuki Jeeps with the Nippondenso ignition. For 99 bucks you get drop dead reliable starting, a set dwell, and never have to change points again, and no point float!. I thought about doing the same for the Honda 600's. I think there is demand.
Mark
www.mphspecialties.com
To: 2cylinderhondas@yahoogroups.com From: dwbrink@...
Date: Tue, 7 Jan 2014 08:01:50 -0800 Subject: Re: [2cylinderhondas] Honda n600 0-60 mph Disaster IGN PICS
Here are installation instructions and an address.
http://www.650motorcycles.com/Martek.html Mark. what are you looking for? For the price of that part you can build a complete ECU and completely control your timing. Add a few sensors and fuel injection. I got my Megasquirt kit for $207. I used it to run timing only with a carburetor.

mgpstearns · Post by **mgpstearns** » Wed Jan 08, 2014 8:50 am

I would be interested in an electronic ignition for my car and would love to see someone come up with a solution that has readily available parts. I was looking at the Martek ignition write up it doesnt seem like it would be too difficult but unfortunately Martek is no longer around. .

dean m · Post by **dean m** » Wed Jan 08, 2014 9:33 am

there is martek stuff on ebay ...search martek
--------------------------------------------

On Wed, 1/8/14, mgpstearns wrote:
Subject: [2cylinderhondas] Re: Honda n600 0-60 mph Disaster IGN PICS
To:
2cylinderhondas@yahoogroups.com
Date: Wednesday, January 8, 2014, 8:50 AM
�
I would be interested in an electronic ignition for
my car and would love to see someone come up with a solution
that has readily available parts. I was looking at the
Martek ignition write up it doesnt seem like it would be too
difficult but unfortunately Martek is no longer around.
.

David Brink · Post by **David Brink** » Wed Jan 08, 2014 8:55 pm

Before I built my ECU I used this solution. The points are still in use with no condenser and mechanical advance is still used. The points will not burn out over time because they no longer carry much current. They just trigger the ford module which in turn triggers the coil. I used the GM coil because I didn't have a Honda waste spark coil. The complete set up cost around $20 from a salvage yard.
http://japanesenostalgiccar.com/forum/v ... ca01921e2d

On Wed, Jan 8, 2014 at 8:50 AM, mgpstearns
�
> I would be interested in an electronic ignition for my car and would love to see someone come up with a solution that has readily available parts. I was looking at the Martek ignition write up it doesnt seem like it would be too difficult but unfortunately Martek is no longer around. .

Honda600Forum.com

Re: Honda n600 0-60 mph Disaster IGN PICS