1st the sedan seats do not fit the coupe. But pull your seats and check out the damage it may be repairable.
2nd, I will attach a diagram of the Coupe with dimensions, there is not dimensions from the bumper to the fire wall, but if you can use this picture and indicate where you want it measured and I will do my best.
Bill
> ----- Original Message -----
> From:
> jason
> hambelton
> To:
> 2cylinderhondas
> Sent:
> Wednesday, January 15, 2003 5:12
> PM
> Subject:
> [2cylinderhondas] Seats
> I need to replace the seats in my Z. Some how they were bent where > the back rest attaches to the bottom of the seat. I have not tried to > bend them back into shape yet, nor do I think that they will look right if I > try. It looks as if a very very large person tried to sit in them both at > the same time. But that's how they were when I got the car.
> I have a N as well and would like to know if the base of the seats are the > same in both cars? It will take some work for me to get the seats out of > the N so I thought I would ask here before I start on it. My guess is > that the bolt pattern is the same.
> Also, if any one knows what the measurement on the 600Z, from the > rear of the hood latch mount to the fire wall is? I have had to do some > major body work on the front end and can't tell if I have the section between > the headlight in line.
> Thanks, Jason
> Do you Yahoo!?
> Yahoo! Mail
> Plus
> - Powerful. Affordable.
> Sign up
> now
> To
> unsubscribe from this group, send an email
> to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .