Bill
> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Miles > Sent:
> Saturday, July 28, 2007 11:45
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] Re: Brake pads
> I found some pads that are a similar size but the holes are too > large.
> I stacked them in my milling machine vise and fly cut them off > about 1/16" > each end to fit in the calipers. They should work fine, > but have not > tested them yet.
> B&B swears by the Civic cut down pads, but it
> looks like you would
> have to redrill the holes on one side?
> Miles
> --- In
> 2cylinderhondas@ yahoogroups. com
> ,
> "kingtrans@. .."
> wrote:
> > i
> take early civic pads and use the old 600 pads as a template and > saw them > to size. be sure to use a dust mask or respriator mask. i > wet mine with a > thick soap solution before i cut them. they work > great and they're > inexpensive. hopes this helps with your brakes.
> > [Non-text
> portions of this message have been removed]