Parts for sale

David Dave · Post by **David Dave** » Tue Dec 25, 2007 7:10 pm

Tom,
The Tank that I have seems to be in really good shape with no
signs of any real rust just a few spots of some surface ruston the
outside. Inside looks pretty clean from what I can see. Sending unit
is still intact and I havn't removed anything . I might even have new
mountinf rubbers for the mounting bolts here! As with anything I
have, Make me an offer. Sorry. I don't get onhere often between jobs.
Mt e-mail is MyGoliath@....
Dave

David Dave · Post by **David Dave** » Sat Dec 29, 2007 5:28 am

Gerry,
I don't have antenna but there is in on ebay right now. Auction#
200187265062
Dave

--- In
anzhonda600owners@yahoogroups.com
, JN wrote:
> do you have an antenna?
> --- gerry demars wrote:
> > David, Did you come up with the parts? Please send
> > your email address or
> > contact info. thanks gerry
> > -----Original Message-----
> > From:
anzhonda600owners@yahoogroups.com
> > [mailto:
anzhonda600owners@yahoogroups.com
]On Behalf
> > Of David/Dave
> > Sent: Tuesday, November 20, 2007 12:06 AM
> > To:
anzhonda600owners@yahoogroups.com
> > Subject: [anzhonda600owners] Re: Parts for sale
> > I live in Ct. I'm not sure what is there. mostly
> > closed boxes. I have
> > to get them in the house where I can look through
> > them and see what is
> > there. It has been 10 years or so since I saw
> > these parts. It is a
> > holiday week but I will work on it this week at
> > night! Sometimes tough
> > to do between 2 jobs and 300 lbs of dog in the
> > house. LOL
> > Dave
> > --- In
anzhonda600owners@yahoogroups.com
,
> > "David/Dave"
> > wrote:
> > > Hi all,
> > > My dad asked me to go up to his house and get
> > all of the boxes of
> > N
> > > & Z parts out of his basement,from when I had
> > both back 12 years ago.
> > I
> > > junked a few cars and stripped them. I have a
> > whole 4 x 8 trailer of
> > > stuff from his house. 4-5 cylinders, heads, 1
> > complete lower end (in
> > > tact),a difrential setup, 2 struts with the
> > mounts, glass, a few dash
> > > boards and gauge clusters, some wiring
> > harnesses, starters , flywheel
> > > w/generator attached, some lights, coupe rear
> > hatch(no glass). Plus
> > > more if anyone is interested in any or all of
> > the parts.
> > > Dave

GERRY DEMARS · Post by **GERRY DEMARS** » Sun Dec 30, 2007 5:33 am

Dave, I am looking for a rear wheel brake cylinder for a sedan.

> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> David/Dave
> Sent:
> Saturday, December 29, 2007 8:29
> AM
> To:
> anzhonda600owners@yahoogroups.com
> Subject:
> [anzhonda600owners] Re: Parts for sale
> Gerry,
> I don't have antenna but there is in on ebay right now.
> Auction#
> 200187265062
> Dave
> --- In
> anzhonda600owners@ yahoogroups. com
> ,
> JN wrote:
> > do you have an
> antenna?
> > --- gerry demars wrote:
> > > David, Did you come up with the parts? Please send
> your email address or
> > > contact info. thanks gerry
> -----Original Message-----
> > > From:
> anzhonda600owners@ yahoogroups. com
> > [mailto:
> anzhonda600owners@ yahoogroups. com
> ]On
> Behalf
> > > Of David/Dave
> > > Sent: Tuesday, November 20,
> 2007 12:06 AM
> > > To:
> anzhonda600owners@ yahoogroups. com
> > Subject: [anzhonda600owners] Re: Parts for sale
> > > I live in Ct. I'm not sure what is there. mostly
> > closed boxes. I have
> > > to get them in the house where I can
> look through
> > > them and see what is
> > > there. It has been
> 10 years or so since I saw
> > > these parts. It is a
> holiday week but I will work on it this week at
> > > night! Sometimes
> tough
> > > to do between 2 jobs and 300 lbs of dog in the
> house. LOL
> > > Dave
> > > --- In
> anzhonda600owners@ yahoogroups. com
> ,
> > "David/Dave"
> > > wrote:
> > > > Hi all,
> > > > My dad
> asked me to go up to his house and get
> > > all of the boxes
> of
> > > N
> > > > & Z parts out of his basement,from
> when I had
> > > both back 12 years ago.
> > > I
> > junked a few cars and stripped them. I have a
> > > whole 4 x 8
> trailer of
> > > > stuff from his house. 4-5 cylinders, heads,
> 1
> > > complete lower end (in
> > > > tact),a difrential
> setup, 2 struts with the
> > > mounts, glass, a few dash
> > boards and gauge clusters, some wiring
> > > harnesses, starters ,
> flywheel
> > > > w/generator attached, some lights, coupe
> rear
> > > hatch(no glass). Plus
> > > > more if anyone is
> interested in any or all of
> > > the parts.
> > > Dave

Darryl · Post by **Darryl** » Sat Jan 19, 2008 5:13 pm

Dave,
If the front struts are still available I am interested. Same goes
for the bushings for the front sway bar mounts. Please let me know.
Dana

Darryl · Post by **Darryl** » Fri Feb 08, 2008 10:51 am

Dave,
I would be interested in a pair of N600 struts.
Dana

David Dave · Post by **David Dave** » Thu Feb 28, 2008 9:58 pm

Gerry,
I found this link today.
http://www.autoshoppingcenter.com/class ... honda.html
They say they have rear cylynders. I hope this is a help.
Dave

w.gillespie · Post by **w.gillespie** » Wed Mar 19, 2008 10:55 am

Dave,
I would be interested in the engine parts. I am trying to put together
an engine for my 600

erikdelagarza · Post by **erikdelagarza** » Wed Mar 19, 2008 11:10 am

what do you need and a price you are willing to pay, i will not entertain low ballers since these engines are extremely hard to find
In a message dated 3/19/2008 12:55:56 P.M. Central Daylight Time, slammedcord@... writes:

> Dave,
> I would be interested in the engine parts. I am trying to put > together > an engine for my 600

Create a Home Theater Like the Pros.
Watch the video on AOL Home .

arklirj · Post by **arklirj** » Wed Mar 19, 2008 11:15 am

are you looking to sell the engine as a whole? if so,
how many miles is on it and what were you thinking
would be a fair price?
thx
J
--- mrpilot79@... wrote:

> what do you need and a price you are willing to pay,
> i will not entertain
> low ballers since these engines are extremely hard
> to find
> In a message dated 3/19/2008 12:55:56 P.M. Central
> Daylight Time,
slammedcord@...
writes:
> Dave,
> I would be interested in the engine parts. I am
> trying to put together
> an engine for my 600
> **************Create a Home Theater Like the Pros.
> Watch the video on AOL
> Home.

(http://home.aol.com/diy/home-improvemen ... 0000000001)
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs

David Dave · Post by **David Dave** » Sun Mar 23, 2008 5:25 am

I'm not looking to make a killing but make an offer. I have a few
cylinders and heads, a disassembled lower end and all kinds of boxes of
stuff.