how'szisdumbthing come out????

T W S · Post by **T W S** » Mon Jul 07, 2008 4:20 pm

hi Curtis, Forest lake Minn, just north of the Twin Cities

--- On
Mon, 7/7/08, Curtis Martin

wrote:
> From: Curtis Martin
> Subject: [anzhonda600owners] Re: how'szisdumbthing come out????
> To: anzhonda600owners@yahoogroups.com
> Date: Monday, July 7, 2008, 3:06 PM
> Where are you located Woof?
> --- In
> anzhonda600owners@ yahoogroups. com
> , "fedweezee"
> wrote:
> > hey everyone im sorry but i put down the wrong link to get a shop > > manual. its www.faxonautolit. com sorry for the mixup.
> > --- In
> anzhonda600owners@ yahoogroups. com
> , "fedweezee"
> > wrote:
> > > --- In
> anzhonda600owners@ yahoogroups. com
> , T W S
> > > wrote:
> > > > hi Everyone, Woof here . .. .im trying to remove the engine > from > > > my 72 Z600. its got a big hole in the front of the crank > case( > > thats > > > how i bought it). . . . i should be waiting to find some kind of > > > manual to work from but now is the time i have to work on it so i > > was > > > kind of hoping someone could give me a few clues as to things i > > > should know. Questions include: how does the shifter unbolt? how > do > > > the the axle shafts come out of the transaxle? is there any way > the > > > motor can come out without taking the cradle that it sits on > out?.
> > > any help appreciated. also, before i got the car, someone took > > some > > > parts off it. looking for rear brake cylinders, front pedal > > cylinder, > > > that whole weird back rear window, and maybe a passenger seat.
> the
> > > car is really rusty and dented up~but its so darn cute i gotta > > > restore it. thanks in advance, Woof
> > > as far as
> removing the shift linkage there is a round hollow pin
> > > holding the shift linkage to the transaxle, remove the boot at > the > > > firewall inside the car where the shift linkage goes into and you > > > will see it. the drive axles are held on by 6 bolts each at the > > > transaxle. remove those bolts and they will come free freom the > > > tansaxle. as far as removing the engine there is no other way to > > > remove it without removing the front suspention (the cradle) > unless > > > you cut up the front end but im sure you do not want to do that.
> > its
> > > best to have a manual for the car if you're going to work on it.
> > easy
> > > way to find one is online. i got mine at www.faxonaoutlit. com.
> > > hopefuly i was of some help to you...

friend · Post by **friend** » Mon Jul 07, 2008 9:11 pm

Woof;
Is that the Yellow Coupe that was in Edina Minnesota?
Bill

> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> T W
> S
> Sent:
> Monday, July 07, 2008 4:20 PM
> To:
> anzhonda600owners@yahoogroups.com
> Subject:
> Re: [anzhonda600owners]
> Re: how'szisdumbthing come out????
> hi Curtis, Forest lake Minn, just north of the Twin
> Cities
> --- On
> Mon, 7/7/08, Curtis Martin
>
> wrote:
> > From: Curtis
> > Martin
> > Subject: [anzhonda600owners] Re:
> > how'szisdumbthing come out????
> > To:
> > anzhonda600owners@ yahoogroups. com
> > Date: Monday, July 7,
> > 2008, 3:06 PM
> > Where are you located Woof?
> > --- In
> > anzhonda600owners@ yahoogroups. com
> > , "fedweezee"
> >
> > wrote:
> > > hey
> > everyone im sorry but i put down the wrong link to get a shop
> > manual. its www.faxonautolit. com sorry for the mixup.
> > > --- In
> > anzhonda600owners@ yahoogroups. com
> > , "fedweezee"
> >
> > > wrote:
> > > > --- In
> > anzhonda600owners@ yahoogroups. com
> > , T W S
> >
> > > > wrote:
> > > > hi Everyone, Woof here . .. .im trying to remove the engine
> > from
> > > > my 72 Z600. its got a big hole in the front of
> > the crank case(
> > > thats
> > > > how i bought it). . . . i
> > should be waiting to find some kind of
> > > > manual to work
> > from but now is the time i have to work on it so i > > > was
> > > > kind of hoping someone could give me a few clues as to > > things i > > > > should know. Questions include: how does the > > shifter unbolt? how > > do > > > > the the axle shafts come out > > of the transaxle? is there any way > > the > > > > motor can > > come out without taking the cradle that it sits on > > out?.
> > > any help appreciated. also, before i got the car, someone took
> > > some
> > > > parts off it. looking for rear brake
> > cylinders, front pedal
> > > cylinder,
> > > > that whole
> > weird back rear window, and maybe a passenger seat.
> > the
> > > car is really rusty and dented up~but its so darn cute i gotta
> > > > restore it. thanks in advance, Woof
> > > > as far as removing the shift linkage there is a
> > round hollow pin
> > > > holding the shift linkage to the
> > transaxle, remove the boot at
> > the
> > > > firewall inside
> > the car where the shift linkage goes into and you > > > > will > > see it. the drive axles are held on by 6 bolts each at the
> > > transaxle. remove those bolts and they will come free freom the
> > > > tansaxle. as far as removing the engine there is no
> > other way to
> > > > remove it without removing the front
> > suspention (the cradle)
> > unless
> > > > you cut up the front
> > end but im sure you do not want to do that.
> > > its
> > best to have a manual for the car if you're going to work on it.
> > > easy
> > > > way to find one is online. i got mine at
> > www.faxonaoutlit. com.
> > > > hopefuly i was of some help to
> > you...

T W S · Post by **T W S** » Mon Jul 07, 2008 9:26 pm

no, this is an orange one that was listed on Craigslist in Ellsworth Wisc. Didnt know about one in Edina

--- On
Mon, 7/7/08, billmyong@...

wrote:
From: billmyong@...
Subject: RE: [anzhonda600owners] Re: how'szisdumbthing come out????
To: anzhonda600owners@yahoogroups.com
Date: Monday, July 7, 2008, 11:10 PM
Woof;
Is that the Yellow Coupe that was in Edina Minnesota?
Bill
> -----Original Message-----
> From:
> anzhonda600owners@ yahoogroups. com [mailto:anzhonda600 owners@yahoogrou ps.com] > On Behalf Of > T W S > Sent:
> Monday, July 07, 2008 4:20 PM
> To:
> anzhonda600owners@ yahoogroups. com
> Subject:
> Re: [anzhonda600owners] Re: how'szisdumbthing come out????
> hi Curtis, Forest lake Minn, just north of the Twin Cities > --- On > Mon, 7/7/08, Curtis Martin > > wrote:
> > From: Curtis Martin
> > Subject: [anzhonda600owners] Re: how'szisdumbthing come out????
> > To: anzhonda600owners@ yahoogroups. com
> > Date: Monday, July 7, 2008, 3:06 PM
> > Where are you located Woof?
> > --- In
> > anzhonda600owners@ yahoogroups. com
> > , "fedweezee"
> > wrote:
> > > hey everyone im sorry but i put down the wrong link to get a shop > > > manual. its www.faxonautolit. com sorry for the mixup.
> > > --- In
> > anzhonda600owners@ yahoogroups. com
> > , "fedweezee"
> > > wrote:
> > > > --- In
> > anzhonda600owners@ yahoogroups. com
> > , T W S
> > > > wrote:
> > > > > hi Everyone, Woof here . .. .im trying to remove the engine > > from > > > > my 72 Z600. its got a big hole in the front of the crank > > case( > > > thats > > > > how i bought it). . . . i should be waiting to find some kind of > > > > manual to work from but now is the time i have to work on it so i > > > was > > > > kind of hoping someone could give me a few clues as to things i > > > > should know. Questions include: how does the shifter unbolt? how > > do > > > > the the axle shafts come out of the transaxle? is there any way > > the > > > > motor can come out without taking the cradle that it sits on > > out?.
> > > > any help appreciated. also, before i got the car, someone took > > > some > > > > parts off it. looking for rear brake cylinders, front pedal > > > cylinder, > > > > that whole weird back rear window, and maybe a passenger seat.
> > the
> > > > car is really rusty and dented up~but its so darn cute i gotta > > > > restore it. thanks in advance, Woof
> > > > as far as
> > removing the shift linkage there is a round hollow pin
> > > > holding the shift linkage to the transaxle, remove the boot at > > the > > > > firewall inside the car where the shift linkage goes into and you > > > > will see it. the drive axles are held on by 6 bolts each at the > > > > transaxle. remove those bolts and they will come free freom the > > > > tansaxle. as far as removing the engine there is no other way to > > > > remove it without removing the front suspention (the cradle) > > unless > > > > you cut up the front end but im sure you do not want to do that.
> > > its
> > > > best to have a manual for the car if you're going to work on it.
> > > easy
> > > > way to find one is online. i got mine at www.faxonaoutlit. com.
> > > > hopefuly i was of some help to you...