Master Cylinder

kevin.gailey · Post by **kevin.gailey** » Fri May 22, 2009 8:22 pm

I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
Kevin

paul tate · Post by **paul tate** » Fri May 22, 2009 9:20 pm

I'm in the same boat. 73 Civic mc is same bolt pattern but too long. Late 90 ish Honda right length wrong bolt pattern. I plan to hit the bone yard in the morning. I'll keep you posted.

--- On
Fri, 5/22/09, kevin.gailey

wrote:
> From: kevin.gailey
> Subject: [anzhonda600owners] Master Cylinder
> To: anzhonda600owners@yahoogroups.com
> Date: Friday, May 22, 2009, 10:20 PM
> I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
> Kevin

riceburner006 · Post by **riceburner006** » Sat May 23, 2009 5:46 pm

---
Interesting!I'm sure many people searched,but the main stumbling block is the length! The bolt up pattern could be altered,the bore size doesn't matter too much. I searched and everytime someone says they found one that works, they won't tell us the make,model or year! Full of BS!
In anzhonda600owners@yahoogroups.com, paul tate wrote:

> I'm in the same boat.� 73 Civic mc is same bolt pattern but too long.� Late 90 ish Honda right length wrong bolt pattern.� I plan to hit the bone yard in the morning.� I'll keep you posted.
> --- On Fri, 5/22/09, kevin.gailey wrote:
> From: kevin.gailey
> Subject: [anzhonda600owners] Master Cylinder
> To:
anzhonda600owners@yahoogroups.com
> Date: Friday, May 22, 2009, 10:20 PM
> I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
> Kevin

Kevin Gailey · Post by **Kevin Gailey** » Sat May 23, 2009 6:11 pm

I am going to find the one that works, hell , I had to do enough research for my masters. I can sure as hell find an MC for a 600! Rebuilding these things over and over seems like false economy and possibly dangerous, after all they are the heart of the brake system.
Search goes on..
From:
riceburner006 To:
anzhonda600owners@yahoogroups.com Sent:
Saturday, May 23, 2009 5:46:51 PM Subject:
[anzhonda600owners] Re: Master Cylinder
---
Interesting! I'm sure many people searched,but the main stumbling block is the length! The bolt up pattern could be altered,the bore size doesn't matter too much. I searched and everytime someone says they found one that works, they won't tell us the make,model or year! Full of BS!
In anzhonda600owners@ yahoogroups. com , paul tate wrote:

> I'm in the same boat. 73 Civic mc is same bolt pattern but too long. Late 90 ish Honda right length wrong bolt pattern. I plan to hit the bone yard in the morning. I'll keep you posted.
> --- On Fri, 5/22/09, kevin.gailey wrote:
> From: kevin.gailey
> Subject: [anzhonda600owners] Master Cylinder
> To:
anzhonda600owners@ yahoogroups. com
> Date: Friday, May 22, 2009, 10:20 PM
> I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
> Kevin

T W S · Post by **T W S** » Sat May 23, 2009 7:17 pm

rruffgggrrruff . . ..sic em!

--- On
Sat, 5/23/09, Kevin Gailey

wrote:
> From: Kevin Gailey
> Subject: Re: [anzhonda600owners] Re: Master Cylinder
> To: anzhonda600owners@yahoogroups.com
> Date: Saturday, May 23, 2009, 8:11 PM
> I am going to find the one that works, hell , I had to do enough research for my masters. I can sure as hell find an MC for a 600! Rebuilding these things over and over seems like false economy and possibly dangerous, after all they are the heart of the brake system.
> Search goes on..
> From:
> riceburner006
> To:
> anzhonda600owners@ yahoogroups. com
> Sent:
> Saturday, May 23, 2009 5:46:51 PM
> Subject:
> [anzhonda600owners] Re: Master Cylinder
> ---
> Interesting! I'm sure many people searched,but the main stumbling block is the length! The bolt up pattern could be altered,the bore size doesn't matter too much. I searched and everytime someone says they found one that works, they won't tell us the make,model or year! Full of BS!
> In
> anzhonda600owners@ yahoogroups. com
> , paul tate wrote:
> > I'm in the same boat. 73 Civic mc is same bolt pattern but too long. Late 90 ish Honda right length wrong bolt pattern. I plan to hit the bone yard in the morning. I'll keep you posted.
> > --- On Fri, 5/22/09, kevin.gailey wrote:
> > From: kevin.gailey
> > Subject:
> [anzhonda600owners] Master Cylinder
> > To:
> anzhonda600owners@ yahoogroups. com
> > Date: Friday, May 22, 2009, 10:20 PM
> > I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
> > Kevin

Kevin Gailey · Post by **Kevin Gailey** » Sat May 23, 2009 9:53 pm

This looks like a winner to me, bolt pattern is same, and length looks like it may work. Ours is 5.5 inches and we can possibly go up to 6 inches long. Although that cutting it close. Somebody tell me I am wrong so I can move on.
Kevin http://cgi.ebay.com/ebaymotors/Master-C ... otohosting From:
T W S To:
anzhonda600owners@yahoogroups.com Sent:
Saturday, May 23, 2009 7:17:41 PM Subject:
Re: [anzhonda600owners] Re: Master Cylinder
rruffgggrrruff . . ..sic em!

--- On
Sat, 5/23/09, Kevin Gailey
From: Kevin Gailey
> Subject: Re: [anzhonda600owners] Re: Master Cylinder
> To: anzhonda600owners@ yahoogroups. com
> Date: Saturday, May 23, 2009, 8:11 PM
> I am going to find the one that works, hell , I had to do enough research for my masters. I can sure as hell find an MC for a 600! Rebuilding these things over and over seems like false economy and possibly dangerous, after all they are the heart of the brake system.
> Search goes on..
> From:
> riceburner006 hotmail.com
> To:
> anzhonda600owners@ yahoogroups. com
> Sent:
> Saturday, May 23, 2009 5:46:51 PM
> Subject:
> [anzhonda600owners] Re: Master Cylinder
> ---
> Interesting! I'm sure many people searched,but the main stumbling block is the length! The bolt up pattern could be altered,the bore size doesn't matter too much. I searched and everytime someone says they found one that works, they won't tell us the make,model or year! Full of BS!
> In
> anzhonda600owners@ yahoogroups. com
> , paul tate wrote:
> > I'm in the same boat. 73 Civic mc is same bolt pattern but too long. Late 90 ish Honda right length wrong bolt pattern. I plan to hit the bone yard in the morning. I'll keep you posted.
> > --- On Fri, 5/22/09, kevin.gailey wrote:
> > From: kevin.gailey
> > Subject:
> [anzhonda600owners] Master Cylinder
> > To:
> anzhonda600owners@ yahoogroups. com
> > Date: Friday, May 22, 2009, 10:20 PM
> > I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
> > Kevin

TOM THIES · Post by **TOM THIES** » Sat May 23, 2009 9:53 pm

when you rebuild the MC (master cylinder) you replace the rubber and than resleeve the MC. I think that pretty much gives you a new MC.. but there is the cost of doing that and I would be easier to find a new (late model) that would work. so if one is found it would be great to know...
Tom T

> ----- Original Message -----
> From:
> T W S
> To:
> anzhonda600owners@yahoogroups.com
> Sent:
> Saturday, May 23, 2009 7:17
> PM
> Subject:
> Re: [anzhonda600owners] Re:
> Master Cylinder
> rruffgggrrruff . . ..sic em!
> --- On
> Sat,
> 5/23/09, Kevin Gailey
> kevin.gailey@ yahoo.com
> wrote:
> > From:
> > Kevin Gailey > kevin.gailey@ yahoo.com
> > Subject:
> > Re: [anzhonda600owners] Re: Master Cylinder
> > To:
> > anzhonda600owners@ yahoogroups. com
> > Date:
> > Saturday, May 23, 2009, 8:11 PM
> > I am going to find the one that works, hell , I had to do enough > > research for my masters. I can sure as hell find an MC for a 600!
> > Rebuilding these things over and over seems like false economy and > > possibly dangerous, after all they are the heart of the brake > > system.
> > Search goes on..
> > From:
> > riceburner006
> >
> > To:
> > anzhonda600owners@
> > yahoogroups. com
> > Sent:
> > Saturday, May 23, 2009
> > 5:46:51 PM
> > Subject:
> > [anzhonda600owners] Re: Master Cylinder
> > ---
> > Interesting! I'm sure many people searched,but the main
> > stumbling block is the length! The bolt up pattern could be > > altered,the bore size doesn't matter too much. I searched and > > everytime someone says they found one that works, they won't tell us > > the make,model or year! Full of BS!
> > In
> > anzhonda600owners@
> > yahoogroups. com
> > , paul tate
> > wrote:
> > > I'm in the same boat. 73 Civic mc is same
> > bolt pattern but too long. Late 90 ish Honda right length wrong > > bolt pattern. I plan to hit the bone yard in the morning.
> > I'll keep you posted.
> > > --- On Fri, 5/22/09,
> > kevin.gailey wrote:
> > > From: kevin.gailey
> > > Subject:
> > [anzhonda600owners] Master Cylinder
> > > To:
> > anzhonda600owners@
> > yahoogroups. com
> > > Date: Friday, May 22, 2009, 10:20
> > PM
> > > I know this may be sacrilegious, but does any other
> > master cylinders fit the Honda 600's? It looks to me as if the one on > > a Toyota Corolla 76-87 might fit. Has anyone done something > > similar?
> > Kevin

paul tate · Post by **paul tate** » Sat May 23, 2009 9:58 pm

That sure looks like a winner. Any thoughts on a reservoir?

--- On
Sat, 5/23/09, Kevin
Gailey

wrote:
> From: Kevin Gailey
> Subject: Re: [anzhonda600owners] Re: Master Cylinder
> To: anzhonda600owners@yahoogroups.com
> Date: Saturday, May 23, 2009, 11:52 PM
> This looks like a winner to me, bolt pattern is same, and length looks like it may work. Ours is 5.5 inches and we can possibly go up to 6 inches long. Although that cutting it close. Somebody tell me I am wrong so I can move on.
> Kevin
> http://cgi.ebay. com/ebaymotors/ Master-Cylinder- 79-80-81- 82-83-Honda- Accord-Civic_ W0QQitemZ2301459 79335QQcmdZViewI temQQptZMotors_ Car_Truck_ Parts_Accessorie s?hash=item3595c 4f3c7&_trksid=p4506. m20.l1116# ebayphotohosting
> From:
> T W S
> To:
> anzhonda600owners@ yahoogroups. com
> Sent:
> Saturday, May 23, 2009 7:17:41 PM
> Subject:
> Re: [anzhonda600owners] Re: Master Cylinder
> rruffgggrrruff . . ..sic em!
> --- On
> Sat, 5/23/09, Kevin Gailey
> yahoo.com
> wrote:
> > From: Kevin Gailey
> > Subject: Re: [anzhonda600owners] Re: Master Cylinder
> > To: anzhonda600owners@ yahoogroups. com
> > Date: Saturday, May 23, 2009, 8:11 PM
> > I am going to find the one that works, hell , I had to do enough research for my masters. I can sure as hell find an MC for a 600! Rebuilding these things over and over seems like false economy and possibly dangerous, after all they are the heart of the brake system.
> > Search goes on..
> > From:
> > riceburner006 > hotmail.com
> > To:
> > anzhonda600owners@ yahoogroups. com
> > Sent:
> > Saturday, May 23, 2009 5:46:51 PM
> > Subject:
> > [anzhonda600owners] Re: Master Cylinder
> > ---
> > Interesting! I'm sure many people searched,but the main stumbling block is the length! The bolt up pattern could be altered,the bore size doesn't matter too much. I searched and everytime someone says they found one that works, they won't tell us the make,model or year! Full of BS!
> > In
> > anzhonda600owners@ yahoogroups. com
> > , paul tate wrote:
> > > I'm in the same boat. 73 Civic mc is same bolt pattern but too long. Late 90 ish Honda right length wrong bolt pattern. I plan to hit the bone yard in the morning. I'll keep you posted.
> > > --- On Fri, 5/22/09, kevin.gailey wrote:
> > > From: kevin.gailey
> > > Subject: [anzhonda600owners] Master Cylinder
> > > To:
> > anzhonda600owners@ yahoogroups. com
> > > Date: Friday, May 22, 2009, 10:20 PM
> > > I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
> > > Kevin

Kevin Gailey · Post by **Kevin Gailey** » Sat May 23, 2009 10:00 pm

I realize this, but 250.00 is a chunk of change From:
TOM THIES To:
anzhonda600owners@yahoogroups.com Sent:
Saturday, May 23, 2009 9:53:00 PM Subject:
Re: [anzhonda600owners] Re: Master Cylinder
when you rebuild the MC (master cylinder) you replace the rubber and than resleeve the MC. I think that pretty much gives you a new MC.. but there is the cost of doing that and I would be easier to find a new (late model) that would work. so if one is found it would be great to know...
Tom T

> ----- Original Message -----
> From:
> T W S
> To:
> anzhonda600owners@ yahoogroups. com
> Sent:
> Saturday, May 23, 2009 7:17
> PM
> Subject:
> Re: [anzhonda600owners] Re:
> Master Cylinder
> rruffgggrrruff . . ..sic em!
> --- On
> Sat,
> 5/23/09, Kevin Gailey
> kevin.gailey@ yahoo.com
> wrote:
> > From:
> > Kevin Gailey > kevin.gailey@ yahoo.com
> > Subject:
> > Re: [anzhonda600owners] Re: Master Cylinder
> > To:
> > anzhonda600owners@ yahoogroups. com
> > Date:
> > Saturday, May 23, 2009, 8:11 PM
> > I am going to find the one that works, hell , I had to do enough > > research for my masters. I can sure as hell find an MC for a 600!
> > Rebuilding these things over and over seems like false economy and > > possibly dangerous, after all they are the heart of the brake > > system.
> > Search goes on..
> > From:
> > riceburner006
> > > hotmail.com
> > To:
> > anzhonda600owners@
> > yahoogroups. com
> > Sent:
> > Saturday, May 23, 2009
> > 5:46:51 PM
> > Subject:
> > [anzhonda600owners] Re: Master Cylinder
> > ---
> > Interesting! I'm sure many people searched,but the main
> > stumbling block is the length! The bolt up pattern could be > > altered,the bore size doesn't matter too much. I searched and > > everytime someone says they found one that works, they won't tell us > > the make,model or year! Full of BS!
> > In
> > anzhonda600owners@
> > yahoogroups. com
> > , paul tate
> > wrote:
> > > I'm in the same boat. 73 Civic mc is same
> > bolt pattern but too long. Late 90 ish Honda right length wrong > > bolt pattern. I plan to hit the bone yard in the morning.
> > I'll keep you posted.
> > > --- On Fri, 5/22/09,
> > kevin.gailey wrote:
> > > From: kevin.gailey
> > > Subject:
> > [anzhonda600owners] Master Cylinder
> > > To:
> > anzhonda600owners@
> > yahoogroups. com
> > > Date: Friday, May 22, 2009, 10:20
> > PM
> > > I know this may be sacrilegious, but does any other
> > master cylinders fit the Honda 600's? It looks to me as if the one on > > a Toyota Corolla 76-87 might fit. Has anyone done something > > similar?
> > Kevin

Kevin Gailey · Post by **Kevin Gailey** » Sat May 23, 2009 10:59 pm

most come with a resevoir From:
paul tate To:
anzhonda600owners@yahoogroups.com Sent:
Saturday, May 23, 2009 9:58:00 PM Subject:
Re: [anzhonda600owners] Re: Master Cylinder
That sure looks like a winner. Any thoughts on a reservoir?

--- On
Sat, 5/23/09, Kevin
Gailey
From: Kevin Gailey
> Subject: Re: [anzhonda600owners] Re: Master Cylinder
> To: anzhonda600owners@ yahoogroups. com
> Date: Saturday, May 23, 2009, 11:52 PM
> This looks like a winner to me, bolt pattern is same, and length looks like it may work. Ours is 5.5 inches and we can possibly go up to 6 inches long. Although that cutting it close. Somebody tell me I am wrong so I can move on.
> Kevin
> http://cgi.ebay. com/ebaymotors/ Master-Cylinder- 79-80-81- 82-83-Honda- Accord-Civic_ W0QQitemZ2301459 79335QQcmdZViewI temQQptZMotors_ Car_Truck_ Parts_Accessorie s?hash=item3595c 4f3c7&_trksid=p4506. m20.l1116# ebayphotohosting
> From:
> T W S
> To:
> anzhonda600owners@ yahoogroups. com
> Sent:
> Saturday, May 23, 2009 7:17:41 PM
> Subject:
> Re: [anzhonda600owners] Re: Master Cylinder
> rruffgggrrruff . . ..sic em!
> --- On
> Sat, 5/23/09, Kevin Gailey
> yahoo.com
> wrote:
> > From: Kevin Gailey
> > Subject: Re: [anzhonda600owners] Re: Master Cylinder
> > To: anzhonda600owners@ yahoogroups. com
> > Date: Saturday, May 23, 2009, 8:11 PM
> > I am going to find the one that works, hell , I had to do enough research for my masters. I can sure as hell find an MC for a 600! Rebuilding these things over and over seems like false economy and possibly dangerous, after all they are the heart of the brake system.
> > Search goes on..
> > From:
> > riceburner006 > hotmail.com
> > To:
> > anzhonda600owners@ yahoogroups. com
> > Sent:
> > Saturday, May 23, 2009 5:46:51 PM
> > Subject:
> > [anzhonda600owners] Re: Master Cylinder
> > ---
> > Interesting! I'm sure many people searched,but the main stumbling block is the length! The bolt up pattern could be altered,the bore size doesn't matter too much. I searched and everytime someone says they found one that works, they won't tell us the make,model or year! Full of BS!
> > In
> > anzhonda600owners@ yahoogroups. com
> > , paul tate wrote:
> > > I'm in the same boat. 73 Civic mc is same bolt pattern but too long. Late 90 ish Honda right length wrong bolt pattern. I plan to hit the bone yard in the morning. I'll keep you posted.
> > > --- On Fri, 5/22/09, kevin.gailey wrote:
> > > From: kevin.gailey
> > > Subject: [anzhonda600owners] Master Cylinder
> > > To:
> > anzhonda600owners@ yahoogroups. com
> > > Date: Friday, May 22, 2009, 10:20 PM
> > > I know this may be sacrilegious, but does any other master cylinders fit the Honda 600's? It looks to me as if the one on a Toyota Corolla 76-87 might fit. Has anyone done something similar?
> > > Kevin