Need a gas cap and other parts for a 1972 600 Sedan...

[misterpoopoohead]

Hi Jessica,
Were you writing to me or Jim?
Anywho, I'm gonna look for something closer to me so I don't have to
deal with a long, long drive with a trailer, etc.
Be careful buying and engine. You definitely want to find an engine
that does not have a worn out crankshaft.
kev

[scott lesniak]

Hello Jessica
I was going to use this engine in another n600 I have but I may have another engine in one of my other parts cars.
I bought 3 cars 4months ago and have not really looked at them yet.One had the engine locked up another is supossed to run and the last had no engine .
I will try to get out there this week and see if I can get it going ok. Here is my number in case you think of any other parts you might need XXX-XXX-XXXX
Thanks
Scott
Jessica Lynch wrote:
hi!
I'm looking for a motor for a '71 n600. i would love to pay for
shipping and get this motor from you if no one else gets it first...
thanks,
jessica lynch
i'd be happy to pay for shipping

On Mar 21, 2007, at 4:58 PM, scott lesniak wrote:
> Hello again.
> I stripped down a n600 today at a yard near my house the car was
> toast but got good motor and a bunch of other stuff.I found you
> some of the light gaskets ther not perfect but quit respectible and
> I got you one side vent it has a few spider cracks in it but it is
> not broken through anywhere.Very usable and it stays shut like it
> should. You can have this stuff if you want it .Just pay the actual
> shipping.
> Scott
> misterpoopoohead wrote:
> Hi Folks,
> I've been away from the group for a bit. I've also rejoined with a
> new user id.
> I'd like to re-introduce myself briefly and then get down to
> business. ;o)
> I own a 1972 Honda 600 Sedan. It's in pretty good shape and a blast
> to drive. Nobody ever looks at me when I drive my Jeep Cherokee!
> I've owned the card for about a year and I've recently taken the
> exhaust system apart and fixed it up. I also had to have the clutch
> cover worked on by Miles, the group moderator. Now that it's back
> together it shifts great, sounds much better, and the exhaust pipe
> doesn't bump into every little imperfection on the road!
> I live just just down the road from Miles. Yes, I know, lucky me!
> Miles has been a huge help and I couldn't have gotten the car back on
> the road without his supply of parts, machining, and knowlege. Thanks
> Miles! ;o)
> Anywho, the car does need a few things:
> 1) A gas cap.
> 2) The little rod that holds the gas cap door shut.
> 3) The rubber pieces that go around all of the windows, doors, side
> view mirror, tail lights, etc.
> 4) A correct rear-view mirror.
> 5) The long flat plastic covers that run alongside the interior of
> the vehicle at the bottom of the door openings.
> 6) A key for the antenna.
> 7) Correct sun visors.
> 8) The plastic vent covers, they're like little doors.
> 9) Correct muffler.
> If you have any of this stuff for sale, and it's in very good to
> excellent condition, let me know your asking price.
> Thanks!
> kev
> ---------------------------------
> The fish are biting.
> Get more visitors on your site using Yahoo! Search Marketing.
---------------------------------
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.

[scott lesniak]

Hello kevin
I need your shipping adress and let me know if there are any other parts you need.
Scott
Kevin Lister wrote:
Awesome! I'll take it!
Let me know how much shipping is and what form of payment you like. Make sure you include your address.
I can pay you with PayPal, Check, Money Order.
Thanks!
kev
scott lesniak wrote:
Hello again.
I stripped down a n600 today at a yard near my house the car was toast but got good motor and a bunch of other stuff.I found you some of the light gaskets ther not perfect but quit respectible and I got you one side vent it has a few spider cracks in it but it is not broken through anywhere.Very usable and it stays shut like it should. You can have this stuff if you want it .Just pay the actual shipping.
Scott
misterpoopoohead wrote:
Hi Folks,
I've been away from the group for a bit. I've also rejoined with a
new user id.
I'd like to re-introduce myself briefly and then get down to
business. ;o)
I own a 1972 Honda 600 Sedan. It's in pretty good shape and a blast
to drive. Nobody ever looks at me when I drive my Jeep Cherokee!
I've owned the card for about a year and I've recently taken the
exhaust system apart and fixed it up. I also had to have the clutch
cover worked on by Miles, the group moderator. Now that it's back
together it shifts great, sounds much better, and the exhaust pipe
doesn't bump into every little imperfection on the road!
I live just just down the road from Miles. Yes, I know, lucky me!
Miles has been a huge help and I couldn't have gotten the car back on
the road without his supply of parts, machining, and knowlege. Thanks
Miles! ;o)
Anywho, the car does need a few things:
1) A gas cap.
2) The little rod that holds the gas cap door shut.
3) The rubber pieces that go around all of the windows, doors, side
view mirror, tail lights, etc.
4) A correct rear-view mirror.
5) The long flat plastic covers that run alongside the interior of
the vehicle at the bottom of the door openings.
6) A key for the antenna.
7) Correct sun visors.
8) The plastic vent covers, they're like little doors.
9) Correct muffler.
If you have any of this stuff for sale, and it's in very good to
excellent condition, let me know your asking price.
Thanks!
kev
---------------------------------
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
---------------------------------
Expecting? Get great news right away with email Auto-Check.
Try the Yahoo! Mail Beta.
---------------------------------
We won't tell. Get more on shows you hate to love
(and love to hate): Yahoo! TV's Guilty Pleasures list.

[misterpoopoohead]

Hi Scott,
I'm also looking for the following:
1) The rubber hangers for the exhaust pipe.
2) Mounting hardware for the muffler including the rubber parts.
3) Cone gasket that goes between the exhaust pipe and the exhaust
manifold. (the gimble joint)
4) Mounting bracket for the exhaust manifold in the front of the car.
Miles tells me it's not needed but I think I'm gonna go ahead and get
one and put it on to hopefully minimize the vibration.
5) Mounting bolts and brackets that mount the exhaust manifold and
exhaust pipe to the side of the engine (clutch cover).
6) The plastic button that goes in the emergency brake handle.
I know that's quite a list. I don't expect you to do a bunch of
wrenching for me for free. So, please don't hesitate to ask for money!
Thanks again!
kev
Central Coast Alliance for Health
Attention: Kevin Lister
1600 Green Hills Road
Scotts Valley, CA 95066

[scott lesniak]

Hi Steve
I will need about a week before I can get out to where my other cars are and see if I can scrounge up the rest of what you need .OK?
I hope this isn't an inconvenience for you it's just I have a lot of things going on right now.
THANKS
Scott
misterpoopoohead wrote:
Hi Scott,
I'm also looking for the following:
1) The rubber hangers for the exhaust pipe.
2) Mounting hardware for the muffler including the rubber parts.
3) Cone gasket that goes between the exhaust pipe and the exhaust
manifold. (the gimble joint)
4) Mounting bracket for the exhaust manifold in the front of the car.
Miles tells me it's not needed but I think I'm gonna go ahead and get
one and put it on to hopefully minimize the vibration.
5) Mounting bolts and brackets that mount the exhaust manifold and
exhaust pipe to the side of the engine (clutch cover).
6) The plastic button that goes in the emergency brake handle.
I know that's quite a list. I don't expect you to do a bunch of
wrenching for me for free. So, please don't hesitate to ask for money!
Thanks again!
kev
Central Coast Alliance for Health
Attention: Kevin Lister
1600 Green Hills Road
Scotts Valley, CA 95066

[misterpoopoohead]

Hi Scott,
It's Kevin, not Steve. ;o)
No sweat. I'm in no hurry.
Thanks again for the help!
kev