Wheels....(again)

[glen c]

Are the wheel stud spacings at 4.25? 108mm? or 110mm?
I dont have mine here at the moment and am not sure....help would be appreciated so i can begin searching for some suitable wheels....
Thanks, Glen

--- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> I dont remember everything, but I know they are 7" wide rims,with a 4"
> backspacing, but they can be reversed so they have a 3" backspacing. I have two
> sets of tires. One set is Hoosiers, the other are Goodyear slicks. I will have
> to get the sizes off the tires tomorrow. But either set of tires I have are not
> actually street legal. I am planning on running the Hoosiers on the street
> though,unless I can find something a little more streetable.
> From: glen c
> To:
anzhonda600owners@yahoogroups.com
> Sent: Fri, November 26, 2010 4:58:02 PM
> Subject: [anzhonda600owners] Re: Wheels....(again)
> That's the look i am wanting Brad...can you tell me what offset you used? Brand
> of tires and size?
> Thanks, Glen
> --- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> > I am running 10x7 wheels on mine.They look like Centerlines, I ordered them
> >from
> > Real Wheels in Iowa I think.  I paid $70 each new. It has been several years
> > since I bought them. They can be ordered in many widths and offsets.  See my
> >pic
> > in the group pics under Brads Project 600.
> > From: glen c
> > To:
anzhonda600owners@yahoogroups.com
> > Sent: Fri, November 26, 2010 2:10:57 PM
> > Subject: [anzhonda600owners] Wheels....(again)
> > Â
> > Wondering if anyone has found a wheel that will fit at lower cost...
> > I am just starting to re-do my Z, and may go with 13's and a wide body kit
> > (handmade of course), if i dont find some aftermarket 10" rims at a better
> >price
> > than what i have seen....
> > I look at this car as a blank sheet of paper and could be many things...not
> > convinced restoring it is the only way to go, so may do mods to make it a
> >unique
> > and fun car...rally or autocross style maybe, anyone else have a "custom" of
> > sorts? Other than shortened or pickup styles? Would love to see some pics
> > ..........
> > Glen

[brad fenn]

The stud spacing is 110mm and my Hoosier racing tires are 60/7.5 x 10,   Thats whats on the sidewall,I think that's more racing size than street.
From:
glen c To:
anzhonda600owners@yahoogroups.com Sent:
Sat, November 27, 2010 5:40:20 PM Subject:
[anzhonda600owners] Re: Wheels....(again)
Are the wheel stud spacings at 4.25? 108mm? or 110mm?
I dont have mine here at the moment and am not sure....help would be appreciated so i can begin searching for some suitable wheels....
Thanks, Glen

--- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> I dont remember everything, but I know they are 7" wide rims,with a 4" > backspacing, but they can be reversed so they have a 3" backspacing. I have two > sets of tires. One set is Hoosiers, the other are Goodyear slicks. I will have > to get the sizes off the tires tomorrow. But either set of tires I have are not > actually street legal. I am planning on running the Hoosiers on the street > though,unless I can find something a little more streetable.
> From: glen c
> To:
anzhonda600owners@yahoogroups.com
> Sent: Fri, November 26, 2010 4:58:02 PM
> Subject: [anzhonda600owners] Re: Wheels....(again)
> �
> That's the look i am wanting Brad...can you tell me what offset you used? Brand > of tires and size?
> Thanks, Glen
> --- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> > I am running 10x7 wheels on mine.They look like Centerlines, I ordered them > >from
> > Real
Wheels in Iowa I think.��  I paid $70 each new. It has been several years > > since I bought them. They can be ordered in many widths and offsets.��  See my > >pic
> > in the group pics under Brads Project 600.
> > From: glen c
> > To:
anzhonda600owners@yahoogroups.com
> > Sent: Fri, November 26, 2010 2:10:57 PM
> > Subject: [anzhonda600owners] Wheels....(again)
> > ��
> > Wondering if anyone has found a wheel that will fit at lower cost...
> > I am just starting to re-do my Z, and may go with 13's and a wide body kit
(handmade of course), if i dont find some aftermarket 10" rims at a better > >price
> > than what i have seen....
> > I look at this car as a blank sheet of paper and could be many things...not > > convinced restoring it is the only way to go, so may do mods to make it a > >unique
> > and fun car...rally or autocross style maybe, anyone else have a "custom" of > > sorts? Other than shortened or pickup styles? Would love to see some pics > > ..........
> > Glen

[odbarmanbarry]

Regarding wheels... I just joined the group... bought a Green Z off ebay from Alex Ihtzak in February... It took most of the summer to overcome the difficulties presented by trying to register the car in New York with a California salvage title. Love the car though. Posted a photo album of some pics from the ebay ad. Steve has been helping me locate parts to fix the damage from a holing by a large branch two weeks ago... Here's the question... Does anybody know anything about the wheels on my car? Nice alloys but I can't find a logo anywhere... Check the closeup in the Photo album, "Barman's Green Z". Thanks!

--- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> The stud spacing is 110mm and my Hoosier racing tires are 60/7.5 x 10,   Thats
> whats on the sidewall,I think that's more racing size than street.
> From: glen c
> To:
anzhonda600owners@yahoogroups.com
> Sent: Sat, November 27, 2010 5:40:20 PM
> Subject: [anzhonda600owners] Re: Wheels....(again)
> Are the wheel stud spacings at 4.25? 108mm? or 110mm?
> I dont have mine here at the moment and am not sure....help would be appreciated
> so i can begin searching for some suitable wheels....
> Thanks, Glen
> --- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> > I dont remember everything, but I know they are 7" wide rims,with a 4"
> > backspacing, but they can be reversed so they have a 3" backspacing. I have two
> > sets of tires. One set is Hoosiers, the other are Goodyear slicks. I will have
> > to get the sizes off the tires tomorrow. But either set of tires I have are not
> > actually street legal. I am planning on running the Hoosiers on the street
> > though,unless I can find something a little more streetable.
> > From: glen c
> > To:
anzhonda600owners@yahoogroups.com
> > Sent: Fri, November 26, 2010 4:58:02 PM
> > Subject: [anzhonda600owners] Re: Wheels....(again)
> > Â
> > That's the look i am wanting Brad...can you tell me what offset you used? Brand
> > of tires and size?
> > Thanks, Glen
> > --- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> > > I am running 10x7 wheels on mine.They look like Centerlines, I ordered them
> > >from
> > > Real Wheels in Iowa I think.  I paid $70 each new. It has been several
> >years
> > > since I bought them. They can be ordered in many widths and offsets.  See
> >my
> > >pic
> > > in the group pics under Brads Project 600.
> > > From: glen c
> > > To:
anzhonda600owners@yahoogroups.com
> > > Sent: Fri, November 26, 2010 2:10:57 PM
> > > Subject: [anzhonda600owners] Wheels....(again)
> > > ÂÂ
> > > Wondering if anyone has found a wheel that will fit at lower cost...
> > > I am just starting to re-do my Z, and may go with 13's and a wide body kit
> > > (handmade of course), if i dont find some aftermarket 10" rims at a better
> > >price
> > > than what i have seen....
> > > I look at this car as a blank sheet of paper and could be many things...not
> > > convinced restoring it is the only way to go, so may do mods to make it a
> > >unique
> > > and fun car...rally or autocross style maybe, anyone else have a "custom" of
> > > sorts? Other than shortened or pickup styles? Would love to see some pics
> > > ..........
> > > Glen

[blake neilson]

Sorry I can't help identify the wheels  but they are really nice looking.  I wish I had a set.
Blake

--- On
Sun, 11/28/10, odbarmanbarry

wrote:
> From: odbarmanbarry
> Subject: [anzhonda600owners] Re: Wheels....(again)
> To: anzhonda600owners@yahoogroups.com
> Date: Sunday, November 28, 2010, 4:17 PM
> Regarding wheels... I just joined the group... bought a Green Z off ebay from Alex Ihtzak in February... It took most of the summer to overcome the difficulties presented by trying to register the car in New York with a California salvage title. Love the car though. Posted a photo album of some pics from the ebay ad. Steve has been helping me locate parts to fix the damage from a holing by a large branch two weeks ago... Here's the question... Does anybody know anything about the wheels on my car? Nice alloys but I can't find a logo anywhere... Check the closeup in the Photo album, "Barman's Green Z". Thanks!
> --- In
> anzhonda600owners@yahoogroups.com
> , brad fenn wrote:
> > The stud spacing is 110mm and my Hoosier racing tires are 60/7.5 x 10,� �  Thats
> > whats on the sidewall,I think that's more racing size than street.
> > From: glen c
> > To:
> anzhonda600owners@yahoogroups.com
> > Sent: Sat, November 27, 2010 5:40:20 PM
> > Subject: [anzhonda600owners] Re: Wheels....(again)
> > �
> > Are the wheel stud spacings at 4.25? 108mm? or 110mm?
> > I dont have mine here at the moment and am not sure....help would be appreciated
> > so i can begin searching for some suitable wheels....
> > Thanks, Glen
> > --- In
> anzhonda600owners@yahoogroups.com
> , brad fenn wrote:
> > > I dont remember everything, but I know they are 7" wide rims,with a 4"
> > > backspacing, but they can be reversed so they have a 3" backspacing. I have two
> > > sets of tires. One set is Hoosiers, the other are Goodyear slicks. I will have
> > > to get the sizes off the tires tomorrow. But either set of tires I have are not
> > > actually street legal. I am planning on running the Hoosiers on the street
> > > though,unless I can find something a little more streetable.
> > > From: glen c
> > > To:
> anzhonda600owners@yahoogroups.com
> > > Sent: Fri, November 26, 2010 4:58:02 PM
> > > Subject: [anzhonda600owners] Re: Wheels....(again)
> > > ��
> > > That's the look i am wanting Brad...can you tell me what offset you used? Brand
> > > of tires and size?
> > > Thanks, Glen
> > > --- In
> anzhonda600owners@yahoogroups.com
> , brad fenn wrote:
> > > > I am running 10x7 wheels on mine.They look like Centerlines, I ordered them
> > > >from
> > > > Real Wheels in Iowa I think.Ò�a��  I paid $70 each new. It has been several
> > >years
> > > > since I bought them. They can be ordered in many widths and offsets.Ò�a��  See
> > >my
> > > >pic
> > > > in the group pics under Brads Project 600.
> > > > From: glen c
> > > > To:
> anzhonda600owners@yahoogroups.com
> > > > Sent: Fri, November 26, 2010 2:10:57 PM
> > > > Subject: [anzhonda600owners] Wheels....(again)
> > > > �a��
> > > > Wondering if anyone has found a wheel that will fit at lower cost...
> > > > I am just starting to re-do my Z, and may go with 13's and a wide body kit
> > > > (handmade of course), if i dont find some aftermarket 10" rims at a better
> > > >price
> > > > than what i have seen....
> > > > I look at this car as a blank sheet of paper and could be many things...not
> > > > convinced restoring it is the only way to go, so may do mods to make it a
> > > >unique
> > > > and fun car...rally or autocross style maybe, anyone else have a "custom" of
> > > > sorts? Other than shortened or pickup styles? Would love to see some pics
> > > > ..........
> > > > Glen