covers, looks great and fit perfect. Nice that more people are producing parts, makes our restorations a lot easier. I will have a price and ship cost for the latch covers this week. Anyone interested please go to my website and email me. http://tru-craft.com/
Thanks
Lyle
--- In
anzhonda600owners@yahoogroups.com
, wrote:
> Lyle;
> The covers look great. There is a picture of some coupe dome light
> covers on the group site. I made them out of a high strength plastic hard
> enough to allow polishing but thin enough to allow light through them. They
> should be the last one you will ever need.
> Bill
> -----Original Message-----
> From:
anzhonda600owners@yahoogroups.com
> [mailto:
anzhonda600owners@yahoogroups.com
]On Behalf Of Eric Geiger
> Sent: Saturday, February 02, 2013 12:30 PM
> To:
> Subject: Re: [anzhonda600owners] Rear seat latch covers
> you already know i want a set of these. i also heard steve got ahold of
> you regrading the rear inside hatch panel. the large one that covers the
> tail lights, I'm totally interested in these as well
> Eric J. Geiger
> ----------------------------------------------------------------------------
> --
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com
> On Feb 1, 2013, at 8:59 AM, Lyle wrote:
> I will be making a few more Coupe latch cover set's to sell. Anyone
> interested please go to my website and send me an email and I will try to
> come up with a price. The more I make
> the cheaper they will be.
> Thanks for the interest.
http://tru-craft.com/
> Lyle
> --- In
anzhonda600owners@yahoogroups.com
, Eric Geiger wrote:
> > Lyle shoot me a direct email, i tried to send u one but it got bounced
> back.
> > Eric J. Geiger
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@
> > www.prgnocturne.com
> > On Jan 31, 2013, at 9:22 PM, Lyle wrote:
> > Hi Eric, glad you like them. I have molded a few set's and I will be
> finishing them this week. Not sure how I should sell them, this website or
> Ebay? Price will depend on how many I make.
> > It's nice that we are getting together and making parts for our
> Honda's! Do we have a list of available parts?
> > Lyle
> > --- In
anzhonda600owners@yahoogroups.com
, Eric Geiger wrote:
> > > looks great, any chance of you making more?
> > > Eric J. Geiger
> > > PRG Nocturne
> > > XXX-XXX-XXXX phone
> > > XXX-XXX-XXXX fax
> > > XXX-XXX-XXXX mobile
> > > egeiger@
> > > www.prgnocturne.com
> > > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > > Hi all. Check out the rear seat latch covers I made for my Coupe in
> the photo section. They were a lot of work. I hand made a mold for the right
> and left covers from wood and clay, using my old broken ones as a pattern.
> Then using an ABS plastic sheet I vacuum formed the basic shape. Using the
> mold to hold the parts I then CNC machined the cut-outs and trimmed the
> outside by hand. They fit great and they look like the originals. Gives the
> rear area a factory finished look.
> > > Lyle