> -----Original Message-----
> From:
> h60074145
> [mailto:h600@...]
> Sent:
> Sunday, March 03, 2002 5:11
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] hello
> did any of you see that engine
> gasket set go for $400 on e bay in the
> 70's approx $600 for engine
> assembly. I have had total of five 600's
> one good coupe still have and
> working on sedan now.Tulsa Oklahoma
> To
> unsubscribe from this group, send an email
> to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .
Re: hello
-
alarconlujan
- Posts: 14
- Joined: Thu Mar 07, 2002 9:13 am
Re: hello
i did, i was the one that sold it
-
twincarb600
- Posts: 47
- Joined: Tue Mar 05, 2002 2:19 pm
Re: hello
i did, I was the one who bought it.--- In
2cylinderhondas@y..., "Harold Hong" wrote:
2cylinderhondas@y..., "Harold Hong" wrote:
> i did, i was the one that sold it
> -----Original Message-----
> From: h60074145 [mailto:h600@s...]
> Sent: Sunday, March 03, 2002 5:11 PM
> To: 2cylinderhondas@y...
> Subject: [2cylinderhondas] hello
> did any of you see that engine gasket set go for $400 on e bay in the
> 70's approx $600 for engine assembly. I have had total of five 600's
> one good coupe still have and working on sedan now.Tulsa Oklahoma
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> To unsubscribe from this group, send an email to:
> 2cylinderhondas-unsubscribe@y...
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
- Attachments
-
Re: hello
if I had the money and needed it I would have paid that much for it too.all I got around here is used parts.I did buy this Honda repair shop inventory on 600's stuff it was two small box's biggest part was carb&clutch pressure plate and disc a few years ago.I still ask small repair shop's or parts stores if they have any parts laying around most of them say no
> ----- Original Message -----
> From:
> twincarb600
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Tuesday, March 05, 2002 10:19
> PM
> Subject:
> [2cylinderhondas] Re:
> hello
> i did, I was the one who bought it.--- In
> 2cylinderhondas@y
> ..., "Harold Hong" HHONG51@A
> ...> wrote:
> > i did, i was
> the one that sold it
> > -----Original
> Message-----
> > From: h60074145
> [mailto:h600@s...]
> > Sent: Sunday, March 03, 2002 5:11
> PM
> > To:
> 2cylinderhondas@y
> ...
> Subject: [2cylinderhondas] hello
> > did any
> of you see that engine gasket set go for $400 on e bay in > the
> > 70's approx $600 for engine assembly. I have had total of > five > 600's > > one good coupe still have and working on > sedan now.Tulsa Oklahoma
> > Yahoo! Groups Sponsor
> ADVERTISEMENT
> > To unsubscribe from this group, send an email
> to:
> > 2cylinderhondas-unsubscribe@y...
> > Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of
> Service.
> To
> unsubscribe from this group, send an email
> to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .
-
twincarb600
- Posts: 47
- Joined: Tue Mar 05, 2002 2:19 pm
Re: hello
I have had my hondas for last 20 years. When I started into them most
dealers in Kansas City didn't even work on them any more. I did buy
the inventory from one dealer and all shop tools that were for the
600 cars. Most dealers have either moved locations or have changed
hands and all the old parts were written off and pitched. I help do
inventory for one that I alway bought from and then turned around and
bought the old 600 parts that they deemed not worth stocking. They
had a real assortment of items. I havn't worked with my cars for last
15 years and started getting back into them about a year ago. I have
forgotten what all I have hidden away but I knew that I didn't have a
brand new gasket set.
Robert
shop inventory on 600's stuff it was two small box's biggest part was
carb&clutch pressure plate and disc a few years ago.I still ask small
repair shop's or parts stores if they have any parts laying around
most of them say no
dealers in Kansas City didn't even work on them any more. I did buy
the inventory from one dealer and all shop tools that were for the
600 cars. Most dealers have either moved locations or have changed
hands and all the old parts were written off and pitched. I help do
inventory for one that I alway bought from and then turned around and
bought the old 600 parts that they deemed not worth stocking. They
had a real assortment of items. I havn't worked with my cars for last
15 years and started getting back into them about a year ago. I have
forgotten what all I have hidden away but I knew that I didn't have a
brand new gasket set.
Robert
too.all I got around here is used parts.I did buy this Honda repair> if I had the money and needed it I would have paid that much for it
shop inventory on 600's stuff it was two small box's biggest part was
carb&clutch pressure plate and disc a few years ago.I still ask small
repair shop's or parts stores if they have any parts laying around
most of them say no
> ----- Original Message -----
> From: twincarb600
> To: 2cylinderhondas@y...
> Sent: Tuesday, March 05, 2002 10:19 PM
> Subject: [2cylinderhondas] Re: hello
> i did, I was the one who bought it.--- In
> 2cylinderhondas@y..., "Harold Hong" wrote:
> > i did, i was the one that sold it
> > -----Original Message-----
> > From: h60074145 [mailto:h600@s...]
> > Sent: Sunday, March 03, 2002 5:11 PM
> > To: 2cylinderhondas@y...
> > Subject: [2cylinderhondas] hello
> > did any of you see that engine gasket set go for $400 on e bay in
> the
> > 70's approx $600 for engine assembly. I have had total of five
> 600's
> > one good coupe still have and working on sedan now.Tulsa Oklahoma
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> > To unsubscribe from this group, send an email to:
> > 2cylinderhondas-unsubscribe@y...
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> To unsubscribe from this group, send an email to:
> 2cylinderhondas-unsubscribe@y...
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
hello
Hi I just purchased an N600 about a week ago.
its in pretty bad shape rust wise, but have already gotten all
my body work quotes so its going to be just fine.
however, i need parts, and occasionally the "its gonna be fine, you really didnt screw it up THAT bad". for now i am in desperate need of weatherstripping, wether new or used, in useable condition. being that mine all fell off in a cloud of carbon dust. well some broke off in pieces. but its all shot. the guy who sold me the car told me to try out here first, and so, here i am!
its also nice to meet some other people with this little thing. its one of the more interesting cars ive owned in a while.
thank you all,
Erik
its in pretty bad shape rust wise, but have already gotten all
my body work quotes so its going to be just fine.
however, i need parts, and occasionally the "its gonna be fine, you really didnt screw it up THAT bad". for now i am in desperate need of weatherstripping, wether new or used, in useable condition. being that mine all fell off in a cloud of carbon dust. well some broke off in pieces. but its all shot. the guy who sold me the car told me to try out here first, and so, here i am!
its also nice to meet some other people with this little thing. its one of the more interesting cars ive owned in a while.
thank you all,
Erik
Re: hello
Erik, Welcome to the club. The weatherstripping is a question often asked in this forum. It would be best if you read the archive of messages first. This was covered less than two weeks ago. That said, go to the groups page, click on messages, then search on weatherstripping.
Bruce D.
Santa Clara, CA From:
"volksbarn@..." To:
2cylinderhondas@yahoogroups.com Sent:
Sunday, April 26, 2009 1:09:00 PM Subject:
[2cylinderhondas] hello
Hi I just purchased an N600 about a week ago.
its in pretty bad shape rust wise, but have already gotten all
my body work quotes so its going to be just fine.
however, i need parts, and occasionally the "its gonna be fine, you really didnt screw it up THAT bad". for now i am in desperate need of weatherstripping, wether new or used, in useable condition. being that mine all fell off in a cloud of carbon dust. well some broke off in pieces. but its all shot. the guy who sold me the car told me to try out here first, and so, here i am!
its also nice to meet some other people with this little thing. its one of the more interesting cars ive owned in a while.
thank you all,
Erik
Bruce D.
Santa Clara, CA From:
"volksbarn@..." To:
2cylinderhondas@yahoogroups.com Sent:
Sunday, April 26, 2009 1:09:00 PM Subject:
[2cylinderhondas] hello
Hi I just purchased an N600 about a week ago.
its in pretty bad shape rust wise, but have already gotten all
my body work quotes so its going to be just fine.
however, i need parts, and occasionally the "its gonna be fine, you really didnt screw it up THAT bad". for now i am in desperate need of weatherstripping, wether new or used, in useable condition. being that mine all fell off in a cloud of carbon dust. well some broke off in pieces. but its all shot. the guy who sold me the car told me to try out here first, and so, here i am!
its also nice to meet some other people with this little thing. its one of the more interesting cars ive owned in a while.
thank you all,
Erik
Re: hello WEATHERSTRIPPING
Just to let all know that the diamond shaped Pushon Weatherstripping from JCWhitney is on is on back order until around the 11th of next month. That is there reply to my order.
Tom T
Tom T
> ----- Original Message -----
> From:
> Bruce Dewing
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Sunday, April 26, 2009 6:21
> PM
> Subject:
> Re: [2cylinderhondas]
> hello
> Erik,
> Welcome to the club. The weatherstripping is a
> question often asked in this forum. It would be best if you read the > archive of messages first. This was covered less than two weeks > ago. That said, go to the groups page, click on messages, then search on > weatherstripping.
> Bruce D.
> Santa Clara, CA
> From:
> "volksbarn@rocketma il.com"
>
> To:
> 2cylinderhondas@ yahoogroups. com
> Sent:
> Sunday, April 26, 2009 1:09:00
> PM
> Subject:
> [2cylinderhondas]
> hello
> Hi I just purchased an N600 about a week ago.
> its in pretty bad shape
> rust wise, but have already gotten all
> my body work quotes so its going to
> be just fine.
> however, i need parts, and occasionally the "its gonna be
> fine, you really didnt screw it up THAT bad". for now i am in desperate need > of weatherstripping, wether new or used, in useable condition. being that mine > all fell off in a cloud of carbon dust. well some broke off in pieces. but its > all shot. the guy who sold me the car told me to try out here first, and so, > here i am!
> its also nice to meet some other people with this little
> thing. its one of the more interesting cars ive owned in a while.
> thank
> you all,
> Erik
Re: hello WEATHERSTRIPPING
It must be popular.
Bill
Bill
> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > TOM THIES > Sent:
> Sunday, April 26, 2009 8:39
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] hello WEATHERSTRIPPING
> Just to let all know that the diamond shaped Pushon Weatherstripping > from JCWhitney is on is on back order until around the 11th of next > month. That is there reply to my order.
> Tom T
> > ----- Original Message -----
> > From:
> > Bruce
> > Dewing
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > Sent:
> > Sunday, April 26, 2009 6:21
> > PM
> > Subject:
> > Re: [2cylinderhondas]
> > hello
> > Erik,
> > Welcome to the club. The weatherstripping is a
> > question often asked in this forum. It would be best if you read the > > archive of messages first. This was covered less than two weeks > > ago. That said, go to the groups page, click on messages, then search > > on weatherstripping.
> > Bruce D.
> > Santa Clara, CA
> > From:
> > "volksbarn@rocketma il.com"
> >
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > Sent:
> > Sunday, April 26, 2009 1:09:00
> > PM
> > Subject:
> > [2cylinderhondas] hello
> > Hi I just purchased an N600 about a week ago.
> > its in pretty bad shape
> > rust wise, but have already gotten all
> > my body work quotes so its going
> > to be just fine.
> > however, i need parts, and occasionally the "its gonna
> > be fine, you really didnt screw it up THAT bad". for now i am in desperate > > need of weatherstripping, wether new or used, in useable condition. being > > that mine all fell off in a cloud of carbon dust. well some broke off in > > pieces. but its all shot. the guy who sold me the car told me to try out > > here first, and so, here i am!
> > its also nice to meet some other
> > people with this little thing. its one of the more interesting cars ive > > owned in a while.
> > thank you all,
> > Erik