n600 windshield contact number below and was quoted shipped for $400

[howardsugarman]

Thank you for your email quote request. The price for
the requested
part
for your vehicle is $400.00 shipped. I do not have a
location close to
you
that has that windshield in stock. If you would like
to place an order
for
this part, please call XXX-XXX-XXXX. Tell the customer
service rep. you
received the quote from Auto Glass Masters USA and
they can assist you
from
there.
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com

[dana]

Message
That's awfully steep. Surely someone on this list can help you out.
Richard Morris

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > howardsugarman@...
> Sent:
> Saturday, November 12,
> 2005 5:55 PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] n600 windshield contact number below and was quoted shipped > for $400 > Thank you for your email quote request.
> The price for
> the requested
> part
> for your vehicle is $400.00
> shipped. I do not have a
> location close to
> you
> that has that
> windshield in stock. If you would like
> to place an order
> for
> this
> part, please call XXX-XXX-XXXX. Tell the customer
> service rep.
> you
> received the quote from Auto Glass Masters USA and
> they can assist
> you
> from
> there.
> Yahoo! Mail - PC Magazine Editors'
> Choice 2005
> http://mail.yahoo.com

[Fred]

Will the z600 windshield fit the n600? Will any other windshields fit?

[dana]

Message
No it won't. But If I was between a rock and a hardspot, Here's what I would do. I would use lexan in place of the glass. Now before others get bent out of shape on this, let me say that it is used as windshields in other areas (airplanes, showcars, motorcycles, etc). The one thing that will kill a plexiglass or lexan windshield is windshield wipers. You will need to use Rain-X on it and not use wipers.
Now, I only view this as a temporary solution until you have a real glass windshield show up. (I sure hope your seal is still good).
Richard Morris

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > mtimion > Sent:
> Saturday, November 12, 2005 9:30
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] Re: n600 windshield contact number below and was quoted > shipped for $400 > Will the z600 windshield fit the > n600?  Will any other windshields fit?
> --- In
> 2cylinderhondas@yahoogroups.com, "Richard
> Morris"
> wrote:
> > That's awfully
> steep. Surely someone on this list can help you out.
> > Richard Morris

[luckygoatmaster]

I have a good used N600 windshield...picked it up off
ebay a couple years ago.
--- mtimion wrote:

> Will the z600 windshield fit the n600? Will any
> other windshields fit?
> --- In
2cylinderhondas@yahoogroups.com
, "Richard
> Morris"
> wrote:
> > That's awfully steep. Surely someone on this list
> can help you out.
> > Richard Morris
> Paul

57 Vespa 400
58 Sachsenring P70 Coupe
59 Austin Mini MK1
61 Morris Mini MK1
69 Cony 360 wide
69 Subaru 360 Young (x2)
69 Subaru 360 Van
70 Honda N600
67 Toyoace crew cab firetruck
76 Mazda Chantez
05 MINI Cooper
66 Bridgestone 90 sport (x2)
67 Moto Guzzi Stornello

[Steve]

Let's say the last good used seal that would be reusable would have
been 1985. When I started working on Honda 600's back in 1981, 10
years after the seals were new. Doubt you will find a good used seal
anymore. Even the car I restored 2 years ago that was parked inside
for 20 years with a blown crank had a rotten seal. Bill Colford has
the new windshield gaskets.
Have a look at the new database I started, it's just under the Links
on our Home Page. There's a list of interchangeable parts and
suppliers designed to help with parts.
Miles

[howardsugarman]

Since these Windshield are made almost like the older
VW Beetles... Can He use the gasket from it and Just
cut it to size and seal it at the bottom center or
something??? could this be possible?? might ot have
the chrome ring around it but hey... Enjoy!
--- Miles Chappell wrote:

> Let's say the last good used seal that would be
> reusable would have
> been 1985. When I started working on Honda 600's
> back in 1981, 10
> years after the seals were new. Doubt you will find
> a good used seal
> anymore. Even the car I restored 2 years ago that
> was parked inside
> for 20 years with a blown crank had a rotten seal.
> Bill Colford has
> the new windshield gaskets.
> Have a look at the new database I started, it's just
> under the Links
> on our Home Page. There's a list of interchangeable
> parts and
> suppliers designed to help with parts.
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, "Richard
> Morris"
> wrote:
> > No it won't. But If I was between a rock and a
> hardspot, Here's
> what I
> > would do. I would use lexan in place of the glass.
> Now before
> others get
> > bent out of shape on this, let me say that it is
> used as
> windshields in
> > other areas (airplanes, showcars, motorcycles,
> etc). The one thing
> that
> > will kill a plexiglass or lexan windshield is
> windshield wipers.
> You
> > will need to use Rain-X on it and not use wipers.
> > Now, I only view this as a temporary solution
> until you have a real
> > glass windshield show up. (I sure hope your seal
> is still good).
> > Richard Morris
> > -----Original Message-----
> > From:
2cylinderhondas@yahoogroups.com
> > [mailto:
2cylinderhondas@yahoogroups.com
] On Behalf
> Of mtimion
> > Sent: Saturday, November 12, 2005 9:30 PM
> > To:
2cylinderhondas@yahoogroups.com
> > Subject: [2cylinderhondas] Re: n600 windshield
> contact number
> below and
> > was quoted shipped for $400
> > Will the z600 windshield fit the n600? Will any
> other windshields
> fit?
> > --- In
2cylinderhondas@yahoogroups.com
, "Richard
> Morris"
> > wrote:
> > > That's awfully steep. Surely someone on this
> list can help you
> out.
> > > Richard Morris
> > _____

Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com

[Fred]

Any chance you're wanting to part with it? I have yet to do a search
for parts cars in my area, but if I can't find anything I'm seriously
considering buying another car in Seattle and either using it as a
parts car or mine as a parts car, depending on which one is in better
shape.

[luckygoatmaster]

Matt,
Thats my car you are looking at in Seattle. Yes I am
willing to part with the windshield. I am also looking
at 2 more Honda 600's today.
Paul
--- mtimion wrote:

> Any chance you're wanting to part with it? I have
> yet to do a search
> for parts cars in my area, but if I can't find
> anything I'm seriously
> considering buying another car in Seattle and either
> using it as a
> parts car or mine as a parts car, depending on which
> one is in better
> shape.
> --- In
2cylinderhondas@yahoogroups.com
, Paul Gerlt
> wrote:
> > I have a good used N600 windshield...picked it up
> off
> > ebay a couple years ago.
> > --- mtimion wrote:
> Paul

57 Vespa 400
58 Sachsenring P70 Coupe
59 Austin Mini MK1
61 Morris Mini MK1
69 Cony 360 wide
69 Subaru 360 Young (x2)
69 Subaru 360 Van
70 Honda N600
67 Toyoace crew cab firetruck
76 Mazda Chantez
05 MINI Cooper
66 Bridgestone 90 sport (x2)
67 Moto Guzzi Stornello

[Fred]

Hi Paul. Boy is my face red :-S
I will probably have to wait until I get the car in to determine
exactly what I need in terms of parts. That might be another few weeks.
I'm starting to think I should have purchased your car instead of the
one in Chicago, but what is done is done. I think that any car is
going to take a huge amount of work to get back in "good" condition.
Looks like my gamble on the car in Chicago may make it so I have a
little more work than your car would have given me. Such is life.
I will have a list of needed parts on this website as soon as my car
arrives.
Just out of curiousity, how would anyone go about shipping a
windshield? It must be extremely expensive to do. I wonder if there
is a "port to port" option for such transactions.