Parting out N600

Archived posts from the 2 Cylinder Hondas Yahoo Group
Post Reply
ric.queen
Posts: 0
Joined: Sat May 30, 2015 5:22 am

Parting out N600

Post by ric.queen »

What do you need? If I have it, name your price and it is yours plus
shipping and handeling. Or make me an offer for the entire car that I
can't refuse. tel.XXX-XXX-XXXX or Email
laurie_randall
Posts: 4
Joined: Mon May 28, 2012 2:00 pm

Re: Parting out N600

Post by laurie_randall »

Hi :
I have a '71 AN600 that needs the following stuff. Can you help?
fuel filler door
inside fresh air vent door
Dome light
headlight switch
Thanks for the reply. I'm located in London Ontario Canada for
calculating postage costs. mike
>From: "shoreacresestate" Reply-To:
2cylinderhondas@yahoogroups.com
>To:
2cylinderhondas@yahoogroups.com
>Subject: [2cylinderhondas] Parting out N600
>Date: Sun, 30 Apr 2006 10:59:31 -0000
>What do you need? If I have it, name your price and it is yours plus
>shipping and handeling. Or make me an offer for the entire car that I
>can't refuse. tel.XXX-XXX-XXXX or Email
shoreacresestate
Posts: 6
Joined: Thu Jan 26, 2006 11:20 pm

Re: Parting out N600

Post by shoreacresestate »

Mike
I will need to take inventory and will get back to you. Hopefully before the end of the week. CW
shoreacresestate
Posts: 6
Joined: Thu Jan 26, 2006 11:20 pm

Re: Parting out N600

Post by shoreacresestate »

Hi Mike
Had a pile of requests so went to the barn and this is what I found out.
I have a fair fuel filter door. Surface rust on one corner about the size of a large quarter.
Spring return not to strong. Metal somewhat rippled. However, I do believe it is quite serviceable. Maybe it would be better if I took a picture of it and sent it to you tomorrow.
Not too sure where the inside vent door is.I am sure I have it, I m just not to sure where to locate it. How much time should it take me to take it off? There is a super dome lite.Also a head lite switch. What do you think all this is worth to you? CW
laurie_randall
Posts: 4
Joined: Mon May 28, 2012 2:00 pm

Re: Parting out N600

Post by laurie_randall »

CW:
The fresh air interior door appears to be held in place by 4 screws. Its
located on the right side kick panel just ahead of the passanger door.
Its hard for me to place values on stuff I really don't have to have as
the car is on the road now.
The vent door would let me close off this blast of cold air early in the
mornings.
There is a headlite switch but who knows where it came from.
The fuel fill door is there but showing rust bubbles.
The dome lite is missing.
It would be nice to have newer/ proper Honda parts.You are the seller.
Is $25.00 enough plus postage? mike
>From:
shoreacresestate@...
>Reply-To:
2cylinderhondas@yahoogroups.com
>To:
2cylinderhondas@yahoogroups.com
>Subject: Re: [2cylinderhondas] Parting out N600
>Date: Sun, 30 Apr 2006 19:00:00 EDT
>Hi Mike
>Had a pile of requests so went to the barn and this is what I found out.
>I have a fair fuel filter door. Surface rust on one corner about the size
>of
>a large quarter.
>Spring return not to strong. Metal somewhat rippled. However, I do believe
>it is quite serviceable. Maybe it would be better if I took a picture of it
>and
> sent it to you tomorrow.
>Not too sure where the inside vent door is.I am sure I have it, I m just
>not
>to sure where to locate it. How much time should it take me to take it
>off?
>There is a super dome lite.Also a head lite switch. What do you think all
>this is worth to you? CW
shoreacresestate
Posts: 6
Joined: Thu Jan 26, 2006 11:20 pm

Re: Parting out N600

Post by shoreacresestate »

Mike, I will look for the vent door now I have an idea where to look. The headlight switch is original. The dome lite is perfect. I'll let you know when I have the door off. CW
shoreacresestate
Posts: 6
Joined: Thu Jan 26, 2006 11:20 pm

Re: Parting out N600

Post by shoreacresestate »

Sorry! Lost all the pics. Will get back to you.
CW
forumadmin
Posts: 9
Joined: Thu Oct 22, 2020 4:33 pm

Re: Parting out N600

Post by forumadmin »

What happened?
Haven't heard back on the parts I was looking for.Please advise.
mike morris
--- In
2cylinderhondas@yahoogroups.com
, shoreacresestate@... wrote:
> Hi Mike
> Had a pile of requests so went to the barn and this is what I
found out.
> I have a fair fuel filter door. Surface rust on one corner about
the size of
> a large quarter.
> Spring return not to strong. Metal somewhat rippled. However, I do
believe
> it is quite serviceable. Maybe it would be better if I took a
picture of it and
> sent it to you tomorrow.
> Not too sure where the inside vent door is.I am sure I have it, I
m just not
> to sure where to locate it. How much time should it take me to take
it off?
> There is a super dome lite.Also a head lite switch. What do you
think all
> this is worth to you? CW
shoreacresestate
Posts: 6
Joined: Thu Jan 26, 2006 11:20 pm

Re: Parting out N600

Post by shoreacresestate »

I have been out of town. Took pics and lost them in cyberspace. Need to take more. Rain this week. Should be able to get the job done. Sorry for the delay. CW
Post Reply