Honda 600 lug nuts

[twostroketurbo]

Does any one have a source for chrome 600 lug nuts?
I think they are 10x1.5mm thread.
Mark

[Mark P Hatten]

I'm looking for 'closed end' chrome lugnuts, possibly called " acorn style? " for a Honda 600.
 10x1.5 thread with taper
These will complete my newly painted "fancy" new wheels, and freshly restored hubcap centers.
http://www.youtube.com/watch?v=HNx66Qfn3iw
Anyone have any leads?
Thanks
Mark
Portland Or.
WWW.MPHSPECIALTIES.COM
To: 2cylinderhondas@yahoogroups.com
From: mphatten@...
Date: Fri, 17 Sep 2010 15:29:29 +0000
Subject: [2cylinderhondas] Honda 600 lug nuts
Does any one have a source for chrome 600 lug nuts?
I think they are 10x1.5mm thread.
Mark

[powersellerhere]

Sidepipes on a 600 Coupe, that's hilarious!
Sounds good though!
In a message dated 9/17/2010 11:55:50 A.M. Eastern Daylight Time, mphatten@... writes:

> I'm looking for 'closed end' chrome lugnuts, possibly called " > acorn style? " for a Honda 600.
>  10x1.5 thread with
> taper
> These will complete my newly painted "fancy" new
> wheels, and freshly restored hubcap centers.
> http://www.youtube.com/watch?v=HNx66Qfn3iw
> Anyone
> have any leads?
> Thanks
> Mark
> Portland
> Or.
> WWW.MPHSPECIALTIES.COM
> To: 2cylinderhondas@yahoogroups.com
> From: mphatten@...
> Date:
> Fri, 17 Sep 2010 15:29:29 +0000
> Subject: [2cylinderhondas] Honda 600 lug
> nuts
> Does any one have a source for chrome 600 lug nuts?
> I
> think they are 10x1.5mm thread.
> Mark

[Mark P Hatten]

I'm glad you like the sidepipes.. I did an earlier video just after I got the engine unstuck and highlighted the sidepipes here :
http://www.youtube.com/watch?v=PBmfViM5MhM
Mark
Portland Or.
WWW.MPHSPECIALTIES.COM
To: 2cylinderhondas@yahoogroups.com
From: powersellerhere@...
Date: Fri, 17 Sep 2010 12:21:42 -0400
Subject: Re: [2cylinderhondas] Honda 600 lug nuts
Sidepipes on a 600 Coupe, that's hilarious!
Sounds good though!
In a message dated 9/17/2010 11:55:50 A.M. Eastern Daylight Time, mphatten@... writes:

> I'm looking for 'closed end' chrome lugnuts, possibly called " acorn style? " for a Honda 600.
>  10x1.5 thread with taper
> These will complete my newly painted "fancy" new wheels, and freshly restored hubcap centers.
> http://www.youtube.com/watch?v=HNx66Qfn3iw
> Anyone have any leads?
> Thanks
> Mark
> Portland Or.
> WWW.MPHSPECIALTIES.COM
> To: 2cylinderhondas@yahoogroups.com
> From: mphatten@...
> Date: Fri, 17 Sep 2010 15:29:29 +0000
> Subject: [2cylinderhondas] Honda 600 lug nuts
> Does any one have a source for chrome 600 lug nuts?
> I think they are 10x1.5mm thread.
> Mark

[Tom T]

Hey if you ever make it to seaside we should meet some place. I have a 72 coupe Sent via DROID on Verizon Wireless

[feltonminicycle]

I have a set of nuts & studs to convert from AZ/Z600 to the early Geo Metro chrome acorn set. The Metro's look similar but are not an exact match $125.00 for 16 studs & 16 nuts, email me off group and I will see if I can find the comparisson pics.
Miles
z600miles @ comcast.net

--- In
2cylinderhondas@yahoogroups.com
, Mark P Hatten wrote:
> I'm looking for 'closed end' chrome lugnuts, possibly called " acorn style? " for a Honda 600.
> 10x1.5 thread with taper
> These will complete my newly painted "fancy" new wheels, and freshly restored hubcap centers.
http://www.youtube.com/watch?v=HNx66Qfn3iw
> Anyone have any leads?
> Thanks
> Mark
> Portland Or.
> WWW.MPHSPECIALTIES.COM
> To:
2cylinderhondas@yahoogroups.com
> From: mphatten@...
> Date: Fri, 17 Sep 2010 15:29:29 +0000
> Subject: [2cylinderhondas] Honda 600 lug nuts
> Does any one have a source for chrome 600 lug nuts?
> I think they are 10x1.5mm thread.
> Mark

[lyletrudell]

Side pipes on a 600, that's great!
What's with you folks on the West coast, anything that has an engine must be modified.....
I like it!
Lyle

--- In
2cylinderhondas@yahoogroups.com
, Mark P Hatten wrote:
> I'm glad you like the sidepipes.. I did an earlier video just after I got the engine unstuck and highlighted the sidepipes here :
http://www.youtube.com/watch?v=PBmfViM5MhM
> Mark
> Portland Or.
> WWW.MPHSPECIALTIES.COM
> To:
2cylinderhondas@yahoogroups.com
> From: powersellerhere@...
> Date: Fri, 17 Sep 2010 12:21:42 -0400
> Subject: Re: [2cylinderhondas] Honda 600 lug nuts
> Sidepipes on a 600 Coupe, that's hilarious!
> Sounds good though!
> In a message dated 9/17/2010 11:55:50 A.M. Eastern Daylight Time, mphatten@... writes:
> I'm looking for 'closed end' chrome lugnuts, possibly called " acorn style? " for a Honda 600.
> 10x1.5 thread with taper
> These will complete my newly painted "fancy" new wheels, and freshly restored hubcap centers.
http://www.youtube.com/watch?v=HNx66Qfn3iw
> Anyone have any leads?
> Thanks
> Mark
> Portland Or.
> WWW.MPHSPECIALTIES.COM
> To:
2cylinderhondas@yahoogroups.com
> From: mphatten@...
> Date: Fri, 17 Sep 2010 15:29:29 +0000
> Subject: [2cylinderhondas] Honda 600 lug nuts
> Does any one have a source for chrome 600 lug nuts?
> I think they are 10x1.5mm thread.
> Mark

[powersellerhere]

It looks like some dumb ass modified it back in the early 70's, big wheels & tires on a front wheel drive car, WOW that makes a lot of sense!
The sound of the pipes sounds great though!
In a message dated 9/20/2010 8:04:29 P.M. Eastern Daylight Time, lyletrudell@... writes:

> Side pipes on a 600, that's great!
> What's with you folks on the West
> coast, anything that has an engine must be modified.....
> I like
> it!
> Lyle
> --- In
> 2cylinderhondas@yahoogroups.com
> ,
> Mark P Hatten wrote:
> > I'm glad
> you like the sidepipes.. I did an earlier video just after I got the engine > unstuck and highlighted the sidepipes here :
> http://www.youtube.com/watch?v=PBmfViM5MhM
> > Mark
> > Portland Or.
> WWW.MPHSPECIALTIES.COM
> > To:
> 2cylinderhondas@yahoogroups.com
> From: powersellerhere@...
> > Date: Fri, 17 Sep 2010 12:21:42
> -0400
> > Subject: Re: [2cylinderhondas] Honda 600 lug nuts
> > Sidepipes on a
> 600 Coupe, that's hilarious!
> > Sounds good though!
> > In a message dated 9/17/2010 11:55:50 A.M. Eastern Daylight > Time, mphatten@... writes:
> > I'm looking for 'closed
> end' chrome lugnuts, possibly called " acorn style? " for a Honda 600.
> > 10x1.5 thread with taper
> > These will complete my
> newly painted "fancy" new wheels, and freshly restored hubcap centers.
> http://www.youtube.com/watch?v=HNx66Qfn3iw
> > Anyone have any leads?
> > Thanks
> Mark
> > Portland Or.
> WWW.MPHSPECIALTIES.COM
> > To:
> 2cylinderhondas@yahoogroups.com
> From: mphatten@...
> > Date: Fri, 17 Sep 2010 15:29:29 +0000
> Subject: [2cylinderhondas] Honda 600 lug nuts
> > Does any one have a source for chrome 600 lug nuts?
> I think they are 10x1.5mm thread.
> > Mark