MUST SELL N600 and Honda Shop Manual

amerigerman1 · Post by **amerigerman1** » Sat Mar 23, 2013 12:14 pm

I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
Thanks,Tim

amerigerman1 · Post by **amerigerman1** » Sat Mar 23, 2013 12:35 pm

Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
Tim

--- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> Thanks,Tim

Charles Gould · Post by **Charles Gould** » Sat Mar 23, 2013 1:02 pm

I may be interested in the shop manual. Is it a Honda manual or after market? Please email me at chasgould@...
and I can Paypal you.
Charles Sent from my iPhone

On Mar 23, 2013, at 3:14 PM, amerigerman1 wrote:
I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
Thanks,Tim

Loren Kuipers · Post by **Loren Kuipers** » Sat Mar 23, 2013 6:30 pm

How much do you want for the n 600?

--- On
Sat, 3/23/13, amerigerman1

wrote:
> From: amerigerman1
> Subject: [2cylinderhondas] Re: MUST SELL N600 and Honda Shop Manual > To: 2cylinderhondas@yahoogroups.com > Date: Saturday, March 23, 2013, 12:35 PM
> Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
> Tim
> --- In
> 2cylinderhondas@yahoogroups.com
> , "amerigerman1" wrote:
> > I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> > Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" > chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> > I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> > Thanks,Tim

amerigerman1 · Post by **amerigerman1** » Sun Mar 24, 2013 5:23 pm

Being the optimist, I was hoping for $1500, however the reality is that I'm pretty motivated to sell, so I would be open for offers.
Tim

--- In
2cylinderhondas@yahoogroups.com
, Loren Kuipers wrote:
> How much do you want for the n 600?
> --- On Sat, 3/23/13, amerigerman1 wrote:
> From: amerigerman1
> Subject: [2cylinderhondas] Re: MUST SELL N600 and Honda Shop Manual
> To:
2cylinderhondas@yahoogroups.com
> Date: Saturday, March 23, 2013, 12:35 PM
> Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
> Tim
> --- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> > I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> > Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> > I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> > Thanks,Tim

notrace07 · Post by **notrace07** » Sun Mar 24, 2013 5:30 pm

Where are you???
Kurt

On Mar 24, 2013, at 5:23 PM, "amerigerman1" wrote:
Being the optimist, I was hoping for $1500, however the reality is that I'm pretty motivated to sell, so I would be open for offers.
Tim
--- In
2cylinderhondas@yahoogroups.com
, Loren Kuipers wrote:
> How much do you want for the n 600?
> --- On Sat, 3/23/13, amerigerman1 wrote:
> From: amerigerman1
> Subject: [2cylinderhondas] Re: MUST SELL N600 and Honda Shop Manual
> To:
2cylinderhondas@yahoogroups.com
> Date: Saturday, March 23, 2013, 12:35 PM
> Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
> Tim
> --- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> > I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> > Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> > I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> > Thanks,Tim

amerigerman1 · Post by **amerigerman1** » Mon Mar 25, 2013 7:21 am

Spokane, WA

--- In
2cylinderhondas@yahoogroups.com
, notrace07@... wrote:
> Where are you???
> Kurt
> On Mar 24, 2013, at 5:23 PM, "amerigerman1" wrote:
> > Being the optimist, I was hoping for $1500, however the reality is that I'm pretty motivated to sell, so I would be open for offers.
> > Tim
> > --- In
2cylinderhondas@yahoogroups.com
, Loren Kuipers wrote:
> > > How much do you want for the n 600?
> > > --- On Sat, 3/23/13, amerigerman1 wrote:
> > > From: amerigerman1
> > > Subject: [2cylinderhondas] Re: MUST SELL N600 and Honda Shop Manual
> > > To:
2cylinderhondas@yahoogroups.com
> > > Date: Saturday, March 23, 2013, 12:35 PM
> > > Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
> > > Tim
> > > --- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> > > > I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> > > > Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> > > > I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> > > > Thanks,Tim

hfmtn600 · Post by **hfmtn600** » Tue Mar 26, 2013 6:18 am

Do you know why it does not run? Has the engine been worked on? What kind of shape is the body in? Would you be able to email me some photos? henrifoch@...
Thanks
Henri

--- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> Spokane, WA
> --- In
2cylinderhondas@yahoogroups.com
, notrace07@ wrote:
> > Where are you???
> > Kurt
> > On Mar 24, 2013, at 5:23 PM, "amerigerman1" wrote:
> > > Being the optimist, I was hoping for $1500, however the reality is that I'm pretty motivated to sell, so I would be open for offers.
> > > Tim
> > > --- In
2cylinderhondas@yahoogroups.com
, Loren Kuipers wrote:
> > > > How much do you want for the n 600?
> > > > --- On Sat, 3/23/13, amerigerman1 wrote:
> > > > From: amerigerman1
> > > > Subject: [2cylinderhondas] Re: MUST SELL N600 and Honda Shop Manual
> > > > To:
2cylinderhondas@yahoogroups.com
> > > > Date: Saturday, March 23, 2013, 12:35 PM
> > > > Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
> > > > Tim
> > > > --- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> > > > > I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> > > > > Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> > > > > I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> > > > > Thanks,Tim

amerigerman1 · Post by **amerigerman1** » Wed Mar 27, 2013 6:06 am

My car sold here locally to a man who is ready and able to get my little baby running! I directed him to this group so I think he'll be joining soon if he hasn't already. He also purchased the shop manual... Thanks everyone for your input and inquiries. For the first time in 15 years I'm 600-less. A little sad, but ready to move on to a new life and a new start! Thanks all!
Tim

--- In
2cylinderhondas@yahoogroups.com
, "hfmtn600" wrote:
> Do you know why it does not run? Has the engine been worked on? What kind of shape is the body in? Would you be able to email me some photos? henrifoch@...
> Thanks
> Henri
> --- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> > Spokane, WA
> > --- In
2cylinderhondas@yahoogroups.com
, notrace07@ wrote:
> > > Where are you???
> > > Kurt
> > > On Mar 24, 2013, at 5:23 PM, "amerigerman1" wrote:
> > > > Being the optimist, I was hoping for $1500, however the reality is that I'm pretty motivated to sell, so I would be open for offers.
> > > > Tim
> > > > --- In
2cylinderhondas@yahoogroups.com
, Loren Kuipers wrote:
> > > > > How much do you want for the n 600?
> > > > > --- On Sat, 3/23/13, amerigerman1 wrote:
> > > > > From: amerigerman1
> > > > > Subject: [2cylinderhondas] Re: MUST SELL N600 and Honda Shop Manual
> > > > > To:
2cylinderhondas@yahoogroups.com
> > > > > Date: Saturday, March 23, 2013, 12:35 PM
> > > > > Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
> > > > > Tim
> > > > > --- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> > > > > > I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> > > > > > Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> > > > > > I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> > > > > > Thanks,Tim

nicoleriley934 · Post by **nicoleriley934** » Tue Apr 09, 2013 3:39 pm

do you still have the n600 honda for sale let me know yes or no the 72 if you do leave a phone number thank jimbo

--- In
2cylinderhondas@yahoogroups.com
, Loren Kuipers wrote:
> How much do you want for the n 600?
> --- On Sat, 3/23/13, amerigerman1 wrote:
> From: amerigerman1
> Subject: [2cylinderhondas] Re: MUST SELL N600 and Honda Shop Manual
> To:
2cylinderhondas@yahoogroups.com
> Date: Saturday, March 23, 2013, 12:35 PM
> Oh yeah, and forgot to mention, the interior is nearly perfect. Front carpets do show some wear and there is a small tear in the driver's seat, but otherwise it's nearly pristine. It still even has a bit of that 70's new car smell in it...
> Tim
> --- In
2cylinderhondas@yahoogroups.com
, "amerigerman1" wrote:
> > I put my N/Z Shop Manual on ebay with no reserve recently and didn't get any bids. Trying to move overseas and need to get rid of it? I would like $20 for it, but would take offers too.
> > Also, I'm selling my 72 N600, all original, but non-running. 75k miles, in quite good condition, still has the plastic over the door panels and on the sunvisors. It has mostly complete tool kit, original spare tire, "new" chains still in the burlap sack! A few parts with it as well. Vehicle is in Spokane, WA.
> > I also have 5 shiny but slightly dented (with some rust on the backs of them) hubcaps. The hubcaps aren't scraped, just a little dinged up. I'll post pics of these. Please let me know asap if you're interested, I am trying to move in a week or so and need to have them gone by then.
> > Thanks,Tim