sway bar bushings.... which one of you are the vendor?

[zinc2u]

Hi Bill,
    Thanks for the info.  Are Bill and Miles both selling these bushings?   Are you both using the same manufacturer?   What is the price and where do I send my check?  I would be interested in the bushings (the two at the front of the car) for the 72 coupe and late model 71 sedan.
     I have been reworking aftermarket suspension bushings when I needed to replace this item.  I did not know a source existed for this item.
thanks,
Dale

> The original ones were 80 shore natural rubber.  But later the QC went by the side and some you could squish with your hands into a ball.
>      Melt on the vehicle, heck, they melted on the shelf.
>     Bill

[iain]

Bill- How much? I'd like to get a pair for my 72 z as well.
Please email to mrosner@...
Thx,

On 6/2/06,
goinhm@...
wrote:
> Hi Bill,
>     Thanks for the info.  Are Bill and Miles both selling these bushings?   Are you both using the same manufacturer?   What is the price and where do I send my check?  I would be interested in the bushings (the two at the front of the car) for the 72 coupe and late model 71 sedan.
>      I have been reworking aftermarket suspension bushings when I needed to replace this item.  I did not know a source existed for this item.
> thanks,
> Dale
> > The original ones were 80 shore natural rubber.  But later the QC went by the side and some you could squish with your hands into a ball.
> >      Melt on the vehicle, heck, they melted on the shelf.
> >     Bill
> SPONSORED LINKS
> Automotive maintenance
> Exotic cars
> Automotive equipment
> Automotive radiators
> Exotic car rental
> Oil cooler

[friend]

Hi Mike ;
    It has taken a bit to get an answer.  But I just found that with tax, shipping, and pirce they are $72.00 each for the large center sway bar bushings and $8.50 each for the end sway bar bushings.  Which comes to $178.00 for the set and $9.00 priority mail shipping.   And Mike , I am making nothing on these.
Bill

> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> mike
> rosner
> Sent:
> Friday, June 02, 2006 1:37 PM
> To:
> anzhonda600owners@yahoogroups.com
> Subject:
> Re: [anzhonda600owners]
> sway bar bushings.... which one of you are the vendor?
> Bill-
> How much? I'd like to get a pair for my
> 72 z as well.
> Please email to
> mrosner@...
> Thx,
> On 6/2/06,
> goinhm@...
> goinhm@...
> > wrote:
> > Hi Bill,
> >     Thanks for the info.  Are Bill and Miles both
> > selling these bushings?   Are you both using the same > > manufacturer?   What is the price and where do I send my > > check?  I would be interested in the bushings (the two at the front of > > the car) for the 72 coupe and late model 71 sedan.
> >      I have been reworking aftermarket suspension
> > bushings when I needed to replace this item.  I did not know a > > source existed for this item.
> > thanks,
> > Dale
> > > The original ones
> > > were 80 shore natural rubber.  But later the QC went by the side and > > > some you could squish with your hands into a > > > ball.
> > >      Melt on
> > > the vehicle, heck, they melted on the shelf.
> > > Bill
> > SPONSORED
> > LINKS
> > Automotive maintenance
> > Exotic cars
> > Automotive equipment
> > Automotive radiators
> > Exotic car rental
> > Oil cooler