We have all had similar problems finding a good usable part. I resorted to finding several parts and was able to cut and glue them together making a good one. Taking care and keeping the cuts correct in length the look good as new.
Bill
> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Ron Ice > Sent:
> Thursday, July 10, 2008 10:53
> AM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] looking for inside door part
> I have also been looking for the exact same piece...passenger door > top trim. I have heard that they are extremely hard to remove > without breaking into several pieces. This is why they are so rare > to find. If anyone has one, I would also be interested.
> Thanks!
> Ron
> --- On
> Thu, 7/10/08, John Ph. Graf
>
> wrote:
> > From: John
> > Ph. Graf
> > Subject: Re:
> > [2cylinderhondas] looking for inside door part > > To:
> > 2cylinderhondas@ yahoogroups. com
> > Date: Thursday, July 10,
> > 2008, 1:34 PM
> > I need the same piece, for both doors, 1971 N600. Thanks.
> > On Jul 10, 2008, at 12:58 PM, Tom Rapini wrote:
> > > I need the long black plastic piece that goes along the top of the > > > inside door lining to hold it in place. Passenger door, 1972 N600.
> > > If anyone has one they would sell, please contact me.