> ----- Original Message -----
> From:
> jeremy grosvenor
> To:
>
2cylinderhondas@yahoogroups.com
> Sent:
> Friday, October 17, 2008 7:59
> PM
> Subject:
> RE: [2cylinderhondas] Re:
> Gaskets & Parts Designations
> does any one know of where to get a fuel pump.... the one under the > seat...
> --- On Fri, 10/17/08, Mike and Tami Speer tmspeer@.... com
> wrote:
> > From: Mike and Tami Speer tmspeer@.... com
> Subject: RE: [2cylinderhondas] Re: Gaskets & Parts Designations
> To:
> 2cylinderhondas@ yahoogroups. com
> Date: Friday, October 17, 2008, 1:41 PM
> > I'll second that on Bill's
> gaskets, a very nice
> > product he has and at a
> > reasonable price,
> now to just get them on.
> > Mike
> > _____
> > From:
> 2cylinderhondas@ yahoogroups. com
> [mailto:
> 2cylinderhondas@ yahoogroups. com
> ]
> On Behalf Of Miles
> > Sent: Thursday, October 16, 2008 7:47 PM
> To:
> 2cylinderhondas@ yahoogroups. com
> Subject: [2cylinderhondas] Re: Gaskets & Parts
> Designations
> > I hope you used a high temp
> gasket material? If you used
> > regular auto
> > parts store paper
> you will have a problem shortly.
> > The brown paper you buy
> will absorb oil and squish down,
> > you will
> > lose your torque
> and it will leak everywhere. Bill Colford
> > sells a
> > set of pre
> printed, cut 'em out yerself gasket set. I
> > have used them
> before and they are top notch. He also has reproduction
> > head gaskets
> > for sale.
> > My take on Parts Lingo:
> Replacement Parts - something that fits or you can make fit
> Aftermarket Parts - a part specifically designed for your > > car,
> > usually cheaper than OEM.
> > OEM - Original Equipment
> Manfacturer, made for or by Honda
> > NOS - New Old Stock - Parts left
> over from the olden days
> > NORS - New Old Replacement Stock -
> Aftermarket vintage
> > parts such as
> > Lazorlite gasket set which
> was OEM repackaged and sold dirt
> > cheap.
> > Some items I
> sell in my eBay store, even though they are
> > OEM were
> > made for
> some other Honda but will work in your 600, such
> > as the
> > wheel
> bearings with the snap ring groove.
> > Miles aka 600miles.com
> aka 600miles600 on eBay
> > --- In 2cylinderhondas@
>
> yahoogroups. com, "fedweezee"
> >
> wrote:
> > > no. i just reused the old headgasket. it came
> off
> > clean so i
> > sprayed
> > > some copper gasketseal
> all over the gasket and
> > installed it. it
> > does
> not leak what so ever. everything else i made gaskets
> > for.
> > > --- In 2cylinderhondas@
>
> yahoogroups. com, goinhm@ wrote:
> > > > Did
> you make you own head gasket? What type of
> > material were
> > you
> > > using?
> > > > Can you
> > > > tell me the
> manufactuer and part number?
> > > > Just
> curious....is this an all-metal head gasket
> > you made?
> > > > thanks,
> > > > Dale
> > > > update: i came acrossed a spare head to take
> > valves
> from, one
> > that
> > > > was overtorqued and busted. i
> pulled the valves
> > and reseated them
> > > > with valve
> grinding compound and a airdrill. they
> > seated evenly
> with
> > > > no pitting or any flaws, so i installed them
> and
> > bought a roll
> > of
> > > > gasket material and
> made my own gaskets and put
> > it all back
> > > together.
> > > > got it together and on the first try it started
> > up
> and ran
> > > awesome.
> > > > its runs soo good, way
> better then before it
> > makes me pleased
> > with
> > the results. now i can drive my z600 again...
> > > > ************ **New MapQuest Local shows
> what's
> > happening at your
> > > destination.
> Dining, Movies, Events, News & more. Try it
> > out
> (
>
http://local.
> >
http://local mapquest. com/?ncid= emlcntnew0000000 2
> mapquest.com/ ?ncid=emlcntnew0 0000002)
> > No virus found in this incoming
> message.
> > Checked by AVG -
>
http://www.avg. com
> > Version: 8.0.173
> / Virus Database: 270.8.1/1729 - Release
> > Date: 10/16/2008
> > 7:12
> PM
> ____________ _________ _________ _________ _________ __
> Do
> You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
>
http://mail. yahoo.com