windshield seal

[Kevin]

the new windshield seal is now avalable it is made of the highest quality rubber compounds avalable. it is a duplcate of the orignal. it will come with the crome locking bead. it is priced at about half of the seal currently avalable. I will have the first seal pro installed by a local glass installer.and will post photos of it on my web page im also working on the rear window,door,and quarter glass seals. I know that there will be those how will question the quality and safety of the seal I can tell you if has been produced by a well known seal manufacture that is willing to stand by there product as will as i am if you are intersted please email me and i will give you pricing thanks for your interst Kevin

[CHEYENNE FLETCHER]

I'm interested.

> ----- Original Message -----
> From:
> Kevin
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Saturday, July 24, 2010 4:36
> PM
> Subject:
> [2cylinderhondas] windshield
> seal
> the new windshield seal is now avalable it is made of the highest quality > rubber compounds avalable. it is a duplcate of the orignal. it will come with > the crome locking bead. it is priced at about half of the seal currently > avalable. I will have the first seal pro installed by a local glass > installer.and will post photos of it on my web page im also working on the > rear window,door,and quarter glass seals. I know that there will be those how > will question the quality and safety of the seal I can tell you if has been > produced by a well known seal manufacture that is willing to stand by there > product as will as i am if you are intersted please email me and i will give > you pricing thanks for your interst Kevin

[Kevin Keough]

hay cheyenne the seal is $150 + shipping with the crome locking bead it is a one peice locking that is easy to install and remove with one of the stainless trim clips at the bottom to finish it
From:
CHEYENNE FLETCHER To:
2cylinderhondas@yahoogroups.com Sent:
Sat, July 24, 2010 5:17:08 PM Subject:
Re: [2cylinderhondas] windshield seal
I'm interested.

> ----- Original Message -----
> From:
> Kevin
> To:
> 2cylinderhondas@ yahoogroups. com
> Sent:
> Saturday, July 24, 2010 4:36 PM
> Subject:
> [2cylinderhondas] windshield seal
> the new windshield seal is now avalable it is made of the highest quality rubber compounds avalable. it is a duplcate of the orignal. it will come with the crome locking bead. it is priced at about half of the seal currently avalable. I will have the first seal pro installed by a local glass installer.and will post photos of it on my web page im also working on the rear window,door, and quarter glass seals. I know that there will be those how will question the quality and safety of the seal I can tell you if has been produced by a well known seal manufacture that is willing to stand by there product as will as i am if you are intersted please email me and i will give you pricing thanks for your interst Kevin

[friend]

�
To be half the price of the current seal, it would have to be $116.00, and what is a crome locking bead?  Or do you mean a chrome locking strip?
Is the seal formed to the corners or will it have to be stretched to go around the corners of the windshield?
All locking strips can be put in easily, but how long will you be able to change out the strip before the rubber is to hard to allow changing it out?
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Kevin Keough > Sent:
> Saturday, July 24, 2010 7:34
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] windshield seal
> hay cheyenne the seal is $150 + shipping with the crome locking bead > it is a one peice locking that is easy to install and remove with one of the > stainless trim clips at the bottom to finish it
> From:
> CHEYENNE FLETCHER
>
> To:
> 2cylinderhondas@ yahoogroups. com
> Sent:
> Sat, July 24, 2010 5:17:08
> PM
> Subject:
> Re:
> [2cylinderhondas] windshield seal
> I'm interested.
> > ----- Original Message -----
> > From:
> > Kevin
> > To:
> > 2cylinderhondas@
> > yahoogroups. com
> > Sent:
> > Saturday, July 24, 2010 4:36
> > PM
> > Subject:
> > [2cylinderhondas] windshield
> > seal
> > the new windshield seal is now avalable it is made of the highest quality > > rubber compounds avalable. it is a duplcate of the orignal. it will come > > with the crome locking bead. it is priced at about half of the seal > > currently avalable. I will have the first seal pro installed by a local > > glass installer.and will post photos of it on my web page im also working on > > the rear window,door, and quarter glass seals. I know that there will be > > those how will question the quality and safety of the seal I can tell you if > > has been produced by a well known seal manufacture that is willing to stand > > by there product as will as i am if you are intersted please email me and i > > will give you pricing thanks for your interst Kevin

[CHEYENNE FLETCHER]

�
I will be in touch. Thanks

> ----- Original Message -----
> From:
> Kevin
> Keough
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Saturday, July 24, 2010 7:34
> PM
> Subject:
> Re: [2cylinderhondas] windshield
> seal
> hay cheyenne the seal is $150 + shipping with the crome locking bead > it is a one peice locking that is easy to install and remove with one of the > stainless trim clips at the bottom to finish it
> From:
> CHEYENNE FLETCHER cheyennefletch@ msn.com
> To:
> 2cylinderhondas@ yahoogroups. com
> Sent:
> Sat, July 24, 2010 5:17:08
> PM
> Subject:
> Re:
> [2cylinderhondas] windshield seal
> I'm interested.
> > ----- Original Message -----
> > From:
> > Kevin
> > To:
> > 2cylinderhondas@
> > yahoogroups. com
> > Sent:
> > Saturday, July 24, 2010 4:36
> > PM
> > Subject:
> > [2cylinderhondas] windshield
> > seal
> > the new windshield seal is now avalable it is made of the highest quality > > rubber compounds avalable. it is a duplcate of the orignal. it will come > > with the crome locking bead. it is priced at about half of the seal > > currently avalable. I will have the first seal pro installed by a local > > glass installer.and will post photos of it on my web page im also working on > > the rear window,door, and quarter glass seals. I know that there will be > > those how will question the quality and safety of the seal I can tell you if > > has been produced by a well known seal manufacture that is willing to stand > > by there product as will as i am if you are intersted please email me and i > > will give you pricing thanks for your interst Kevin