Miles;
Didn't you make some of these a while back?
Bill
Note: 2 image(s) originally linked in this post are no longer available (ec, ec).> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> Jerry
> A
> Sent:
> Saturday, July 24, 2010 7:09 PM
> To:
> anzhonda600owners@yahoogroups.com
> Subject:
> Re: [anzhonda600owners]
> Re: Cam chain tensioner piston
> heres
> a pic of the manual tensioner set up, from what
> i can translate from the site it is just a stock one modified for the > manual adjustment. ive also come across alot of them running newer coil > packs with replaceable wires and points eliminator kits with CD , > attached pics but not sure if they work with this message board thing , > first time trying this .
> --- On
> Sat, 7/24/10,
> lyletrudell
>
> wrote:
> > From:
> > lyletrudell
> > Subject:
> > [anzhonda600owners] Re: Cam chain tensioner piston > > To:
> > anzhonda600owners@ yahoogroups. com
> > Date: Saturday, July
> > 24, 2010, 8:33 PM
> > Jerry, sure always good to look at other designs.
> > The oil
> > pressure system is pretty common on most cars and bikes > > now.
> > Lyle
> > --- In
> > anzhonda600owners@ yahoogroups. com
> > ,
> > Jerry wrote:
> > > I ran across a
> > manual tensioner set up the other day when looking for parts online , > > would anyone be interested in that set up? Looked to be something that > > could be reproduced pretty easily
> > > -----Original
> > Message-----
> > > From: misterpoopoohead@ ...
> > > Sent:
> > Friday, July 23, 2010 5:38 PM
> > > To:
> > anzhonda600owners@ yahoogroups. com
> > Subject: Re: [anzhonda600owners] Re: Cam chain tensioner > > piston
> > > again, bummer!
> > > Sent
> > from my Verizon Wireless BlackBerry
> > > From: goinhm@...
> > Sender:
> > anzhonda600owners@ yahoogroups. com
> > Date: Fri, 23 Jul 2010 19:24:11 EDT
> > > To: > anzhonda600owners@ yahoogroups. com
> > ReplyTo:
> > anzhonda600owners@ yahoogroups. com
> > Subject: Re: [anzhonda600owners] Re: Cam chain tensioner > > piston
> > > If by interference engine you
> > mean the valve can strike the piston if the cam timing is off, > > then it is an interference engine.
> > > Dale
> > I thought they were, but maybe I am wrong. Can somebody shed some > > light on this,it would be an important thing to know for sure.
> > > [The entire original message is not
> > included]