Rear brake cylinder rebuild kits

[lyletrudell]

I went though my pile of Honda parts.
I have quite a few sets of Honda 600 Sedan/Coupe rear brake cylinder rebuild kits. NOS 11/16" includes 2 Pistons with seals.
One kit will rebuild one side.
If anyone is interested contact me.
craft59@...
I could sell them on Ebay.
Lyle

[CHEYENNE FLETCHER]

got any early brake shoes??

> ----- Original Message -----
> From:
> lyletrudell
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Wednesday, September 01, 2010 4:31
> PM
> Subject:
> [2cylinderhondas] Rear brake
> cylinder rebuild kits
> I went though my pile of Honda parts.
> I have quite a few sets of Honda
> 600 Sedan/Coupe rear brake cylinder rebuild kits. NOS 11/16" includes 2 > Pistons with seals.
> One kit will rebuild one side.
> If anyone is
> interested contact me.
> craft59@...
> I could sell them on
> Ebay.
> Lyle

[lyletrudell]

Sorry, no shoes at all.
Mostly rear brake cylinder parts, front brake seals, wheel seals, a few ignition, oil filters, piston rings and cv boots.
Lyle

--- In
2cylinderhondas@yahoogroups.com
, "CHEYENNE FLETCHER" wrote:
> got any early brake shoes??
> ----- Original Message -----
> From: lyletrudell
> To:
2cylinderhondas@yahoogroups.com
Sent: Wednesday, September 01, 2010 4:31 PM
> Subject: [2cylinderhondas] Rear brake cylinder rebuild kits
> I went though my pile of Honda parts.
> I have quite a few sets of Honda 600 Sedan/Coupe rear brake cylinder rebuild kits. NOS 11/16" includes 2 Pistons with seals.
> One kit will rebuild one side.
> If anyone is interested contact me.
> craft59@...
> I could sell them on Ebay.
> Lyle

[lyletrudell]

I am not sure what I paid for these rear brake parts because I bought a bunch of stuff for one price.
I want to keep a couple sets for spares and sell the rest.
I have heard these rear wheel cylinder parts sell for big bucks on Ebay $50+++.
This is a onetime thing, so I will sell them for a fair price.
*1 kit, includes 2 pistons and all seals, will rebuild one side.
$32 includes shipping in USA.
*2 kits, includes 4 pistons and all seals, will rebuild both sides.
$60 includes shipping in USA.
See picture in photo section of what they look like.
The pistons are chrome or nickle plated with a nice finish and the rubber seals are soft but still new old stock. Most are Raybesto's or Wagner and I have measured the piston diameters for size and length and they are all good.
The kits will fit coupes and most sedans with 11/16" bores.
I don't have a lot of these, I will pack them in a padded mailing envelope and mail all at one time. This is not my business so I don't want to spend a lot of time on this.
I will trade for other Honda parts also.
Please contact me by email only, I don't want to tie up this site for selling stuff.
If anyone is interested contact me.
craft59@aol,com
Thanks
Lyle

--- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> Sorry, no shoes at all.
> Mostly rear brake cylinder parts, front brake seals, wheel seals, a few ignition, oil filters, piston rings and cv boots.
> Lyle
> --- In
2cylinderhondas@yahoogroups.com
, "CHEYENNE FLETCHER" wrote:
> > got any early brake shoes??
> > ----- Original Message -----
> > From: lyletrudell
> > To:
2cylinderhondas@yahoogroups.com
> Sent: Wednesday, September 01, 2010 4:31 PM
> > Subject: [2cylinderhondas] Rear brake cylinder rebuild kits
> > I went though my pile of Honda parts.
> > I have quite a few sets of Honda 600 Sedan/Coupe rear brake cylinder rebuild kits. NOS 11/16" includes 2 Pistons with seals.
> > One kit will rebuild one side.
> > If anyone is interested contact me.
> > craft59@
> > I could sell them on Ebay.
> > Lyle

[lyletrudell]

I still have a few sets left if anybody is interested.
*1 kit, includes 2 pistons and all seals, will rebuild one side.
$32 includes shipping in USA.
*2 kits, includes 4 pistons and all seals, will rebuild both sides.
$60 includes shipping in USA.
See picture in photo section of what they look like.
The pistons are chrome or nickle plated with a nice finish and the rubber seals are soft but still new old stock. Most are Raybesto's or Wagner and I have measured the piston diameters for size and length and they are all good.
The kits will fit coupes and most sedans with 11/16" bores.
I will pack them in a padded mailing envelope and mail all at one time. This is not my business so I don't want to spend a lot of time on this.
I will trade for other Honda parts also.
Please contact me by email only, I don't want to tie up this site for selling stuff.
If anyone is interested contact me.
craft59@...
Thanks
Lyle

[trtlepnther21]

What parts are you looking for? I wouldn't mind trading for a couple rebuild kits.
I have a large amount of parts, just let me know what you need and I will have to look through the shelves.
Thanks,
Matt
trtlepnther21@...

--- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> I am not sure what I paid for these rear brake parts because I bought a bunch of stuff for one price.
> I want to keep a couple sets for spares and sell the rest.
> I have heard these rear wheel cylinder parts sell for big bucks on Ebay $50+++.
> This is a onetime thing, so I will sell them for a fair price.
> *1 kit, includes 2 pistons and all seals, will rebuild one side.
> $32 includes shipping in USA.
> *2 kits, includes 4 pistons and all seals, will rebuild both sides.
> $60 includes shipping in USA.
> See picture in photo section of what they look like.
> The pistons are chrome or nickle plated with a nice finish and the rubber seals are soft but still new old stock. Most are Raybesto's or Wagner and I have measured the piston diameters for size and length and they are all good.
> The kits will fit coupes and most sedans with 11/16" bores.
> I don't have a lot of these, I will pack them in a padded mailing envelope and mail all at one time. This is not my business so I don't want to spend a lot of time on this.
> I will trade for other Honda parts also.
> Please contact me by email only, I don't want to tie up this site for selling stuff.
> If anyone is interested contact me.
> craft59@aol,com
> Thanks
> Lyle
> --- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> > Sorry, no shoes at all.
> > Mostly rear brake cylinder parts, front brake seals, wheel seals, a few ignition, oil filters, piston rings and cv boots.
> > Lyle
> > --- In
2cylinderhondas@yahoogroups.com
, "CHEYENNE FLETCHER" wrote:
> > > got any early brake shoes??
> > > ----- Original Message -----
> > > From: lyletrudell
> > > To:
2cylinderhondas@yahoogroups.com
> > Sent: Wednesday, September 01, 2010 4:31 PM
> > > Subject: [2cylinderhondas] Rear brake cylinder rebuild kits
> > > I went though my pile of Honda parts.
> > > I have quite a few sets of Honda 600 Sedan/Coupe rear brake cylinder rebuild kits. NOS 11/16" includes 2 Pistons with seals.
> > > One kit will rebuild one side.
> > > If anyone is interested contact me.
> > > craft59@
> > > I could sell them on Ebay.
> > > Lyle

[lyletrudell]

Hi Matt, just Email me.
I still have kits left.
I need stuff for my 72 Coupe but its all apart and in boxes, but
I will get a list together.
Craft59@...
Lyle

--- In
2cylinderhondas@yahoogroups.com
, "trtlepnther21" wrote:
> What parts are you looking for? I wouldn't mind trading for a couple rebuild kits.
> I have a large amount of parts, just let me know what you need and I will have to look through the shelves.
> Thanks,
> Matt
> trtlepnther21@...
> --- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> > I am not sure what I paid for these rear brake parts because I bought a bunch of stuff for one price.
> > I want to keep a couple sets for spares and sell the rest.
> > I have heard these rear wheel cylinder parts sell for big bucks on Ebay $50+++.
> > This is a onetime thing, so I will sell them for a fair price.
> > *1 kit, includes 2 pistons and all seals, will rebuild one side.
> > $32 includes shipping in USA.
> > *2 kits, includes 4 pistons and all seals, will rebuild both sides.
> > $60 includes shipping in USA.
> > See picture in photo section of what they look like.
> > The pistons are chrome or nickle plated with a nice finish and the rubber seals are soft but still new old stock. Most are Raybesto's or Wagner and I have measured the piston diameters for size and length and they are all good.
> > The kits will fit coupes and most sedans with 11/16" bores.
> > I don't have a lot of these, I will pack them in a padded mailing envelope and mail all at one time. This is not my business so I don't want to spend a lot of time on this.
> > I will trade for other Honda parts also.
> > Please contact me by email only, I don't want to tie up this site for selling stuff.
> > If anyone is interested contact me.
> > craft59@aol,com
> > Thanks
> > Lyle
> > --- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> > > Sorry, no shoes at all.
> > > Mostly rear brake cylinder parts, front brake seals, wheel seals, a few ignition, oil filters, piston rings and cv boots.
> > > Lyle
> > > --- In
2cylinderhondas@yahoogroups.com
, "CHEYENNE FLETCHER" wrote:
> > > > got any early brake shoes??
> > > > ----- Original Message -----
> > > > From: lyletrudell
> > > > To:
2cylinderhondas@yahoogroups.com
> > > Sent: Wednesday, September 01, 2010 4:31 PM
> > > > Subject: [2cylinderhondas] Rear brake cylinder rebuild kits
> > > > I went though my pile of Honda parts.
> > > > I have quite a few sets of Honda 600 Sedan/Coupe rear brake cylinder rebuild kits. NOS 11/16" includes 2 Pistons with seals.
> > > > One kit will rebuild one side.
> > > > If anyone is interested contact me.
> > > > craft59@
> > > > I could sell them on Ebay.
> > > > Lyle