Cam Chain

Archived posts from the ANZ Honda 600 Owners Yahoo Group
Post Reply
a65tigrr
Posts: 4
Joined: Fri Jul 06, 2007 5:52 am

Cam Chain

Post by a65tigrr »

I am in the middle of overhauling my engine, and need
to know how to check my cam chain and hydralic chain
tensioner to see if they need replaced.
Thanks, Greg Sikes
71 Honda N600
77 VW Beetle
60 VW Beetle
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
h60074145
Posts: 1
Joined: Sat Apr 20, 2002 11:35 pm

Re: Cam Chain

Post by h60074145 »

Greg,  I have some engine parts listed on eBay.  Here is a list for you.
1
14001-568-305
Camshaft drive chain w/ master link.
1
12105-568-000
Camshaft drive chain slipper.
1
12106-568-000
Slipper pin-5x25.4.
1
12106-593-000
Slipper pin-5x23.8.
2
12274-551-305
Exhaust rocker arm spacer.
1
14500-568-000
Chain tensioner assy.
1
14630-568-060
Chain guide roller.
1
14630-568-000
Chain guide roller.
2
14641-551-030
Guide roller bushing.
2
14736-551-050
Inlet rocker arm shaft.
2
14731-551-050
Exhaust rocker arm shaft.
Thanks, Russ
> ----- Original Message -----
> From:
> Greg Sikes
> To:
> anzhonda600owners@yahoogroups.com
> Sent:
> Tuesday, September 03, 2002 6:42
> AM
> Subject:
> [anzhonda600owners] Cam
> Chain
> I am in the middle of overhauling my engine, and need
> to
> know how to check my cam chain and hydralic chain
> tensioner to see if they
> need replaced.
> Thanks, Greg Sikes
> 71 Honda
> N600
> 77 VW Beetle
> 60 VW
> Beetle
> Do You
> Yahoo!?
> Yahoo! Finance - Get real-time stock quotes
> http://finance.yahoo.com
> To
> unsubscribe from this group, send an email
> to:
> anzhonda600owners-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .
dealadayray
Posts: 1
Joined: Sun Aug 18, 2002 12:08 am

Re: Cam Chain

Post by dealadayray »

Hi Greg;
Go to the groups index and then to files, there is an article on
changing out your cam chain and it also gives a rule of thumb on how to
check to see if it is stretched. As for the hydraulic tensioner, the only
way is to pull it. Take it apart and clean everything out. The valve in
the bottom does come out and it too needs to be cleaned. I also have the
two O rings for it, if you can't get them from Honda.
Bill
franknfike
Posts: 20
Joined: Fri Mar 13, 2009 3:22 am

Cam Chain

Post by franknfike »

I searched through the posts and found only one saying where to find a new cam chain and I couldn't figure out exactly which chain I needed.
Can somebody tell me where to obtain a new cam chain utilizing a master link that I can install? I have a 72 AN600 Sedan
Thanks,
Tom
Post Reply