rubber part numbers inquiry

Archived posts from the ANZ Honda 600 Owners Yahoo Group
Post Reply
hondadaping
Posts: 0
Joined: Mon Jan 22, 2007 9:28 am

rubber part numbers inquiry

Post by hondadaping »

Hi. Does anyone know what the part numbers are for the rubber trim
for the two back-side and rear windows?
Thanks,
Kevin
mterrens
Posts: 2
Joined: Sat Jan 22, 2005 10:36 am

Re: rubber part numbers inquiry

Post by mterrens »

Coupe or sedan?
the coupe rear window #s are
73865-605-010 weather strip right quarter window
73867-605-010 weather strip left quarter window
> ----- Original Message -----
> From:
> hondadaping
> To:
> anzhonda600owners@yahoogroups.com
> Sent:
> Monday, January 22, 2007 8:28
> PM
> Subject:
> [anzhonda600owners] rubber part
> numbers inquiry
> Hi. Does anyone know what the part numbers are for the rubber > trim > for the two back-side and rear windows?
> Thanks,
> Kevin
mterrens
Posts: 2
Joined: Sat Jan 22, 2005 10:36 am

Re: rubber part numbers inquiry

Post by mterrens »

Sedan:
73863-538-363, Seal, R, quarter glass
73864-538-353, Seal, L, quarter glass
Get ALL the part #s for both Coupe and sedan by downloading the parts catalogs at my page
http://www.honda600coupe.com/Manuals,_b ... ments.html
BTW, are you trying to buy this stuff from Honda?
Steve
> ----- Original Message -----
> From:
> hondadaping
> To:
> anzhonda600owners@yahoogroups.com
> Sent:
> Monday, January 22, 2007 8:28
> PM
> Subject:
> [anzhonda600owners] rubber part
> numbers inquiry
> Hi. Does anyone know what the part numbers are for the rubber > trim > for the two back-side and rear windows?
> Thanks,
> Kevin
Kevin S
Posts: 0
Joined: Mon Jan 22, 2007 5:48 am

Re: rubber part numbers inquiry

Post by Kevin S »

Hi Steven,
Thanks for your reply, its a sedan. I have visited your website, its pretty awesome,
(I was just reading the brochures yesterday!) I saw the parts catalog but didn't occur to me to open and see it (you made 6mb sound kind of scarry...) Im gonna ask honda if they
have parts.
Also, I would like to paint the car, but I don't want to do the masking tape thing... I want it coated wherever the paint will be actually visible, like behind the rubber parts and the inside of the doors. Not sure if that is the type of thing earl scheib does...any suggestions on who can do this 'economically?'
Thanks!
Kevin (LA, CA)
Steven Michelsen wrote:
> Sedan:
> 73863-538-363, Seal, R, quarter glass
> 73864-538-353, Seal, L, quarter glass
> Get ALL the part #s for both Coupe and sedan by downloading the parts catalogs at my page
> http://www.honda600 coupe.com/ Manuals,_ bulletins, _advertisements. html
> BTW, are you trying to buy this stuff from Honda?
> Steve
> > ----- Original Message -----
> > From:
> > hondadaping
> > To:
> > anzhonda600owners@ yahoogroups. com
> > Sent:
> > Monday, January 22, 2007 8:28 PM
> > Subject:
> > [anzhonda600owners] rubber part numbers inquiry
> > Hi. Does anyone know what the part numbers are for the rubber trim > > for the two back-side and rear windows?
> > Thanks,
> > Kevin
Tom Ruwart
Posts: 0
Joined: Tue Jan 02, 2007 11:44 am

Re: rubber part numbers inquiry

Post by Tom Ruwart »

Howdy,
I went completely nuts on mine and took the entire thing apart. You
can see much of it at
http://www.ioperformance.com/Other%20Projects.htm
The thing I noticed that was of particular concern was the surface
rust under the fenders and under the fresh-air intake near the wind
shield. I would recommend taking a look at those spots if you plan on
keeping the car for any length of time and don't want it to rust
through unexpectedly in those hiden areas. The other areas that seem
to be common trouble spots are the lower rear quarter panels right at
the bottom. Other than that, if you take *all* the paint off you
might find other areas that had been previously repaired. However,
for simplicity, take a look at the spots I mentioned.
Cheers!
-Tom
mterrens
Posts: 2
Joined: Sat Jan 22, 2005 10:36 am

Re: rubber part numbers inquiry

Post by mterrens »

Kevin,
My disclaimer about the 6MB file is only to let those with dialup be aware that the file may take a while.  Also, unless you have the latest version of adobe reader, which will let you "save a copy" right from the browser, you'll want to download it first, then open the file from your PC later.  See the page for info.
Regarding the paint job, anything that involves more labor will cost more.  There's not much way around it.  Call around and ask your local shops what "levels" of service they have and what it costs.  Make them be specific.  There must be a happy medium in there somewhere.
Good luck,
Steve
www.honda600coupe.com
> ----- Original Message -----
> From:
> Kevin S
> To:
> anzhonda600owners@yahoogroups.com
> Sent:
> Tuesday, January 23, 2007 2:00
> PM
> Subject:
> Re: [anzhonda600owners] rubber
> part numbers inquiry
> Hi Steven,
> Thanks for your reply, its a sedan. I have visited your website, its > pretty awesome,
> (I was just reading the brochures yesterday!) I saw the parts catalog but > didn't occur to me to open and see it (you made 6mb sound kind of scarry...) > Im gonna ask honda if they
> have parts.
> Also, I would like to paint the car, but I don't want to do the masking > tape thing... I want it coated wherever the paint will be actually visible, > like behind the rubber parts and the inside of the doors. Not sure if that is > the type of thing earl scheib does...any suggestions on who can do this > 'economically?'
> Thanks!
> Kevin (LA, CA)
> Steven Michelsen
> wrote:
> > Sedan:
> > 73863-538-363, Seal, R, quarter
> > glass
> > 73864-538-353, Seal, L, quarter
> > glass
> > Get ALL the part #s for both Coupe and sedan by
> > downloading the parts catalogs at my page
> > http://www.honda600 coupe.com/ Manuals,_ bulletins, _advertisements. html
> > BTW, are you trying to buy this stuff from
> > Honda?
> > Steve
> > > ----- Original Message -----
> > > From:
> > > hondadaping
> > > To:
> > > anzhonda600owners@ yahoogroups. com
> > > Sent:
> > > Monday, January 22, 2007 8:28
> > > PM
> > > Subject:
> > > [anzhonda600owners] rubber
> > > part numbers inquiry
> > > Hi. Does anyone know what the part numbers are for the > > > rubber trim > > > for the two back-side and rear windows?
> > > Thanks,
> > > Kevin
> > > Yahoo! Groups
> > > Links
> > > To
Post Reply