Bill
> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Miles > Sent:
> Monday, June 02, 2008 11:09
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] Re: cracked
> You could take it to a motorcycle shop that does Plastic Welding and
> get it fixed. I have done alot of plastic welding with a soldering
> gun, but it is not strong when I do it, I don't have the proper
> welding rods and it stinks really bad !
> They do plastic welding
> alot of the fairings and sidecovers.
> Miles
> --- In
> 2cylinderhondas@ yahoogroups. com
> ,
> "Bill Tucker"
> wrote:
> > I am looking for a
> hatch for my 71 600 coupe. The hole hatch and the
> > latch that bolts on
> inside. Can any body help?
> ____________ _________ _________ __
> > From:
> 2cylinderhondas@ yahoogroups. com
> [mailto:
> 2cylinderhondas@ yahoogroups. com
> ]
> On Behalf Of Steven
> Michelsen
> > Sent: Monday, June 02, 2008 8:30
> AM
> > To: Honda group - 2cylinderhondas; Honda group -
> anzhonda600owners
> > Subject: [2cylinderhondas] cracked
> > My hatch has developed a crack. Damn! It starts on the
> outside and
> > stops just after the first turn. It has not yet reached
> the surface
> > that approaches the glass. I want to prevent it from
> getting
> bigger.
> > Is there a preferred product - glue, epoxy,
> something - hopefully
> black
> > in color - that I can squeeze into the
> crack from the back, that
> would
> > stop it from growing, and not be
> too noticeable from "10 feet"?
> > Thanks
> much,
> > Steve