carburetor

[hemlock215]

I am looking for a n600 sedan carburetor, rebuildable or ready to go.
I currently have two, one 1970 model with a torn upper large diaphragm and one newer model with a rotten aluminum core.
I think I'm ready to fire it up after the classic "20 years sitting in the garage" if I can find a carb.
bill

[Wade Sherman]

I my have one give me a call XXX-XXX-XXXX XXX-XXX-XXXX wade .

On Mon Mar 1st, 2010 11:13 AM EST hemlock215 wrote:
>I am looking for a n600 sedan carburetor, rebuildable or ready to go.
>I currently have two, one 1970 model with a torn upper large diaphragm and one newer model with a rotten aluminum core.
>I think I'm ready to fire it up after the classic "20 years sitting in the garage" if I can find a carb.
>bill

[Alex Sanchez]

How can I get removed from these postings ?

[frankaritz1]

Please remove my name from your email list.
Thanks
Frank Ritz

[friend]

Look at the bottom of this e-mail, there is a unsubscribe button to remove you from this group.

> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> Alex
> Sanchez
> Sent:
> Tuesday, March 02, 2010 10:50 AM
> To:
> anzhonda600owners@yahoogroups.com
> Subject:
> RE: [anzhonda600owners]
> carburetor
> How can I get
> removed from these postings ?
> From:
> anzhonda600owners@ yahoogroups. com
> [mailto:anzhonda600 owners@yahoogrou ps.com]
> On Behalf Of
> Wade
> Sherman
> Sent:
> Tuesday, March 02, 2010 12:15
> To:
> anzhonda600owners@ yahoogroups. com
> Subject:
> Re:
> [anzhonda600owners] carburetor
> I my have one give me a call XXX-XXX-XXXX XXX-XXX-XXXX wade .
> On Mon
> Mar 1st, 2010 11:13 AM EST hemlock215 wrote:
> >I am looking for a
> n600 sedan carburetor, rebuildable or ready to go.
> >I currently
> have two, one 1970 model with a torn upper large diaphragm and one newer model > with a rotten aluminum core.
> >I think I'm ready to fire it up
> after the classic "20 years sitting in the garage" if I can find a > carb.
> >bill
> ------------ --------- --------- --------- --------- --
> Disclaimer
> This
> email and any files transmitted with it are confidential and intended solely > for the recipient(s) . If you are not the named addressee you should not > disseminate, distribute, copy or alter this email. Any views or opinions > presented in this email are solely those of the author and might not represent > those of the company. Warning: Although the company has taken reasonable > precautions to ensure no viruses are present in this email, the company cannot > accept responsibility for any loss or damage arising from the use of this > email or attachments.
> ------------ --------- --------- --------- --------- --

[Fred]

Hey guys, still dealing with my carb issue tearing it down again. Plan on soaking in a carb cleaning solution and I've got everything taken apart except for the little ball valve above the accelerator pump, not sure I need to remove it or not. I can't get the #29 slow jet out,this is on the assembly detail shown @(parts.sonshonda.com)I'm afraid I'll break something. Any input would be appreciated.
Thanks,
Fred

[Lyle]

Hi fred, pretty sure #29 is under the rubber plug, between the 2 main jets.
It should come out easy.
Keep soaking with carb cleaner.
Wash the carb in hot soapy water, then try soaking it in a pot of boiling water, just tell the wife/girl friend your cooking dinner. Sometime the heat helps loosen deposits.
Compressed air and a small tube nozzle works good.
Safety glasses!
Lyle

--- In
anzhonda600owners@yahoogroups.com
, "Fred" wrote:
> Hey guys, still dealing with my carb issue tearing it down again. Plan on soaking in a carb cleaning solution and I've got everything taken apart except for the little ball valve above the accelerator pump, not sure I need to remove it or not. I can't get the #29 slow jet out,this is on the assembly detail shown @(parts.sonshonda.com)I'm afraid I'll break something. Any input would be appreciated.
> Thanks,
> Fred