The missing piece of my puzzle.

Mega · Post by **Mega** » Mon Jun 28, 2010 1:15 pm

Hi guys, I've located most of the parts I need to rebuild my engine, EXCEPT for one last piece.
I need a cam chain tensioning wheel.
http://i81.photobucket.com/albums/j228/ ... IM0822.jpg
As you can see, mine was pretty chewed up. If any of you have one, or know where I can get one, please let me know.
I am also still looking for cheap used pistons for a Z600 coupe. I think I'll go with everyone's advice and replace mine if I can find replacements.
thanks guys,
Mike.

Marshall · Post by **Marshall** » Mon Jun 28, 2010 2:34 pm

Mike, You're tensioner wheel looks pretty much like most of mine. Like most that are removed from most engines having done some thousands of miles. In my experience, that one should be able to be returned. Marshall.

--- In
anzhonda600owners@yahoogroups.com
, "Mega" wrote:
> Hi guys, I've located most of the parts I need to rebuild my engine, EXCEPT for one last piece.
> I need a cam chain tensioning wheel.
http://i81.photobucket.com/albums/j228/ ... IM0822.jpg
> As you can see, mine was pretty chewed up. If any of you have one, or know where I can get one, please let me know.
> I am also still looking for cheap used pistons for a Z600 coupe. I think I'll go with everyone's advice and replace mine if I can find replacements.
> thanks guys,
> Mike.

Marshall · Post by **Marshall** » Mon Jun 28, 2010 2:44 pm

Just make certain the non-return valve in the hydraulic pressure unit is fuctioning correctly.

--- In
anzhonda600owners@yahoogroups.com
, "Marshall" wrote:
> Mike, You're tensioner wheel looks pretty much like most of mine. Like most that are removed from most engines having done some thousands of miles. In my experience, that one should be able to be returned. Marshall.
> --- In
anzhonda600owners@yahoogroups.com
, "Mega" wrote:
> > Hi guys, I've located most of the parts I need to rebuild my engine, EXCEPT for one last piece.
> > I need a cam chain tensioning wheel.
http://i81.photobucket.com/albums/j228/ ... IM0822.jpg
> > As you can see, mine was pretty chewed up. If any of you have one, or know where I can get one, please let me know.
> > I am also still looking for cheap used pistons for a Z600 coupe. I think I'll go with everyone's advice and replace mine if I can find replacements.
> > thanks guys,
> > Mike.

lyletrudell · Post by **lyletrudell** » Mon Jun 28, 2010 3:25 pm

Marshall & Mike, a good used roller might work OK, saw one on Ebay.
I don't really want to use 38 year old rubber/plastic rollers in my fresh rebuild.
I talked to Miles and Bill about making new rollers.
We are working on material and design issues.
Will start a new post.
Lyle

--- In
anzhonda600owners@yahoogroups.com
, "Marshall" wrote:
> Mike, You're tensioner wheel looks pretty much like most of mine. Like most that are removed from most engines having done some thousands of miles. In my experience, that one should be able to be returned. Marshall.
> --- In
anzhonda600owners@yahoogroups.com
, "Mega" wrote:
> > Hi guys, I've located most of the parts I need to rebuild my engine, EXCEPT for one last piece.
> > I need a cam chain tensioning wheel.
http://i81.photobucket.com/albums/j228/ ... IM0822.jpg
> > As you can see, mine was pretty chewed up. If any of you have one, or know where I can get one, please let me know.
> > I am also still looking for cheap used pistons for a Z600 coupe. I think I'll go with everyone's advice and replace mine if I can find replacements.
> > thanks guys,
> > Mike.

Jerry · Post by **Jerry** » Mon Jun 28, 2010 3:33 pm

Ebay number 380246181659 , nos tensioner ,minty fresh ,pricey but worth it
From: lyletrudell
Sent: Monday, June 28, 2010 4:22 PM
To: anzhonda600owners@yahoogroups.com
Subject: [anzhonda600owners] Re: The missing piece of my puzzle.
Marshall & Mike, a good used roller might work OK, saw one on Ebay.
I don't really want to use 38 year old rubber/plastic rollers in my fresh rebuild.
I talked to Miles and Bill about making new rollers.
We are working on material and design issues.
Will start a new post.
Lyle

--- In
anzhonda600owners@yahoogroups.com
, "Marshall" wrote:
> Mike, You're tensioner wheel looks pretty much like most of mine. Like most that are removed from most engines having done some thousands of miles. In my experience, that one should be able to be returned. Marshall.
> --- In
anzhonda600owners@yahoogroups.com
, "Mega" wrote:
> > Hi guys, I've located most of the parts I need to rebuild my engine, EXCEPT for one last piece.
> > I need a cam chain tensioning wheel.
http://i81.photobucket.com/albums/j228/ ... IM0822.jpg > > As you can see, mine was pretty chewed up If any of you have one, or know where I can get one, please let me know.
> > I am also still looking for cheap used pistons for a Z600 coupe. I think I'll go with everyone's advice and replace mine if I can find replacements.
> > thanks g

[The entire original message is not included]

Mega · Post by **Mega** » Tue Jun 29, 2010 8:20 am

thanks Jerry,
Some one already bought that one. Looks like it went pretty fast. I wrote to the guy, and I think he has more than one. Hopefully anyway.

--- In
anzhonda600owners@yahoogroups.com
, Jerry wrote:
> Ebay number 380246181659 , nos tensioner ,minty fresh ,pricey but worth it
> -----Original Message-----
> From: lyletrudell
> Sent: Monday, June 28, 2010 4:22 PM
> To:
anzhonda600owners@yahoogroups.com
> Subject: [anzhonda600owners] Re: The missing piece of my puzzle.
> Marshall & Mike, a good used roller might work OK, saw one on Ebay.
> I don't really want to use 38 year old rubber/plastic rollers in my fresh rebuild.
> I talked to Miles and Bill about making new rollers.
> We are working on material and design issues.
> Will start a new post.
> Lyle
> --- In
anzhonda600owners@yahoogroups.com
, "Marshall" wrote:
> > Mike, You're tensioner wheel looks pretty much like most of mine. Like most that are removed from most engines having done some thousands of miles. In my experience, that one should be able to be returned. Marshall.
> > --- In
anzhonda600owners@yahoogroups.com
, "Mega" wrote:
> > > Hi guys, I've located most of the parts I need to rebuild my engine, EXCEPT for one last piece.
> > > I need a cam chain tensioning wheel.
http://i81.photobucket.com/albums/j228/ ... IM0822.jpg
> > > As you can see, mine was pretty chewed up. If any of you have one, or know where I can get one, please let me know.
> > > I am also still looking for cheap used pistons for a Z600 coupe. I think I'll go with everyone's advice and replace mine if I can find replacements.
> > > thanks g
> [The entire original message is not included]