Spark Plug boot grommet?

Lyle · Post by **Lyle** » Thu Mar 31, 2011 7:40 pm

I was installing my engine sheet metal fan shroud covers on the side of the cylinder head. They have large holes to allow the spark plug boots and a plug socket to get to the plugs.
My question is did they have a grommet in the holes?
Or was the stock boot large enough to fit the hole?
Thanks
Lyle

brad fenn · Post by **brad fenn** » Thu Mar 31, 2011 9:26 pm

As I remember, there were no boots filling the holes,it was a little open around the plug connector.
From:
Lyle To:
anzhonda600owners@yahoogroups.com Sent:
Thu, March 31, 2011 9:40:19 PM Subject:
[anzhonda600owners] Spark Plug boot grommet?
I was installing my engine sheet metal fan shroud covers on the side of the cylinder head. They have large holes to allow the spark plug boots and a plug socket to get to the plugs.
My question is did they have a grommet in the holes?
Or was the stock boot large enough to fit the hole?
Thanks Lyle

Lyle · Post by **Lyle** » Fri Apr 01, 2011 6:24 am

Couldn't find any close up pictures of it.
Thanks

--- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> As I remember, there were no boots filling the holes,it was a little open around
> the plug connector.
> From: Lyle
> To:
anzhonda600owners@yahoogroups.com
> Sent: Thu, March 31, 2011 9:40:19 PM
> Subject: [anzhonda600owners] Spark Plug boot grommet?
> I was installing my engine sheet metal fan shroud covers on the side of the
> cylinder head. They have large holes to allow the spark plug boots and a plug
> socket to get to the plugs.
> My question is did they have a grommet in the holes?
> Or was the stock boot large enough to fit the hole?
> Thanks
> Lyle

Bill · Post by **Bill** » Sat Apr 02, 2011 12:13 am

Lyle;
Go to page 57 or 58 of the Sedan Owners manual and it shows a sparkplug and pages 58 and 59 of the coupe Owners manual.
Bill

Lyle · Post by **Lyle** » Sun Apr 03, 2011 1:04 pm

Thanks Bill & Brad, yep it looks like no grommets.
Lyle

--- In
anzhonda600owners@yahoogroups.com
, "Bill" wrote:
> Lyle;
> Go to page 57 or 58 of the Sedan Owners manual and it shows a sparkplug and
> pages 58 and 59 of the coupe Owners manual.
> Bill
> _____
> From:
anzhonda600owners@yahoogroups.com
> [mailto:
anzhonda600owners@yahoogroups.com
] On Behalf Of Lyle
> Sent: Friday, April 01, 2011 6:19 AM
> To:
anzhonda600owners@yahoogroups.com
> Subject: [anzhonda600owners] Re: Spark Plug boot grommet?
> Couldn't find any close up pictures of it.
> Thanks
> --- In
anzhonda600owners@yahoogroups.com
> , brad fenn
> wrote:
> > As I remember, there were no boots filling the holes,it was a little open
> around
> > the plug connector.
> > From: Lyle
> > To:
anzhonda600owners@yahoogroups.com
>
> > Sent: Thu, March 31, 2011 9:40:19 PM
> > Subject: [anzhonda600owners] Spark Plug boot grommet?
> > �
> > I was installing my engine sheet metal fan shroud covers on the side of
> the
> > cylinder head. They have large holes to allow the spark plug boots and a
> plug
> > socket to get to the plugs.
> > My question is did they have a grommet in the holes?
> > Or was the stock boot large enough to fit the hole?
> > Thanks
> > Lyle

brad fenn · Post by **brad fenn** » Sun Apr 03, 2011 1:25 pm

Yea Lyle, I am used to VWs that have Grommets/seals,but the VWs have the fan blowing air through, so they need to be sealed. The Honda is drawing the air through, so not important to seal them.
From:
Lyle To:
anzhonda600owners@yahoogroups.com Sent:
Sun, April 3, 2011 3:04:04 PM Subject:
[anzhonda600owners] Re: Spark Plug boot grommet?
Thanks Bill & Brad, yep it looks like no grommets.
Lyle

--- In
anzhonda600owners@yahoogroups.com
, "Bill" wrote:
> Lyle;
> Go to page 57 or 58 of the Sedan Owners manual and it shows a sparkplug and > pages 58 and 59 of the coupe Owners manual.
> Bill
> _____
> From:
anzhonda600owners@yahoogroups.com
> [mailto:
anzhonda600owners@yahoogroups.com
] On Behalf Of Lyle
> Sent: Friday, April 01, 2011 6:19 AM
> To:
anzhonda600owners@yahoogroups.com
> Subject: [anzhonda600owners] Re: Spark Plug boot grommet?
> Couldn't find any close up pictures of it.
> Thanks
> --- In
anzhonda600owners@yahoogroups.com
> , brad fenn
> wrote:
> > As I remember, there were no boots filling the holes,it was a little open > around > > the plug connector.
> > From: Lyle
> > To:
anzhonda600owners@yahoogroups.com
>
> > Sent: Thu, March 31, 2011 9:40:19 PM
> > Subject: [anzhonda600owners] Spark Plug boot grommet?
> > �
> > I was installing my engine sheet metal fan shroud covers on the side of > the > > cylinder head. They have large holes to allow the spark plug boots and a > plug > > socket to get to the plugs.
> > My question is did they have a grommet in the holes?
> > Or was the stock boot large enough to fit the hole?
> > Thanks
> > Lyle

Lyle · Post by **Lyle** » Tue Apr 05, 2011 3:32 pm

Look at the pictures of one of my coils and sparkplug boots.
It has a large boot.
Maybe from a VW?
Lyle

--- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> Yea Lyle, I am used to VWs that have Grommets/seals,but the VWs have the fan
> blowing air through, so they need to be sealed. The Honda is drawing the air
> through, so not important to seal them.
> From: Lyle
> To:
anzhonda600owners@yahoogroups.com
> Sent: Sun, April 3, 2011 3:04:04 PM
> Subject: [anzhonda600owners] Re: Spark Plug boot grommet?
> Thanks Bill & Brad, yep it looks like no grommets.
> Lyle
> --- In
anzhonda600owners@yahoogroups.com
, "Bill" wrote:
> > Lyle;
> > Go to page 57 or 58 of the Sedan Owners manual and it shows a sparkplug and
> > pages 58 and 59 of the coupe Owners manual.
> > Bill
> > _____
> > From:
anzhonda600owners@yahoogroups.com
> > [mailto:
anzhonda600owners@yahoogroups.com
] On Behalf Of Lyle
> > Sent: Friday, April 01, 2011 6:19 AM
> > To:
anzhonda600owners@yahoogroups.com
> > Subject: [anzhonda600owners] Re: Spark Plug boot grommet?
> > Couldn't find any close up pictures of it.
> > Thanks
> > --- In
anzhonda600owners@yahoogroups.com
> > , brad fenn
> > wrote:
> > > As I remember, there were no boots filling the holes,it was a little open
> > around
> > > the plug connector.
> > > From: Lyle
> > > To:
anzhonda600owners@yahoogroups.com
> >
> > > Sent: Thu, March 31, 2011 9:40:19 PM
> > > Subject: [anzhonda600owners] Spark Plug boot grommet?
> > > Â
> > > I was installing my engine sheet metal fan shroud covers on the side of
> > the
> > > cylinder head. They have large holes to allow the spark plug boots and a
> > plug
> > > socket to get to the plugs.
> > > My question is did they have a grommet in the holes?
> > > Or was the stock boot large enough to fit the hole?
> > > Thanks
> > > Lyle

brad fenn · Post by **brad fenn** » Tue Apr 05, 2011 3:47 pm

Where would one find this pic?
From:
Lyle To:
anzhonda600owners@yahoogroups.com Sent:
Tue, April 5, 2011 5:32:12 PM Subject:
[anzhonda600owners] Re: Spark Plug boot grommet?
Look at the pictures of one of my coils and sparkplug boots.
It has a large boot.
Maybe from a VW?
Lyle

--- In
anzhonda600owners@yahoogroups.com
, brad fenn wrote:
> Yea Lyle, I am used to VWs that have Grommets/seals,but the VWs have the fan > blowing air through, so they need to be sealed. The Honda is drawing the air > through, so not important to seal them.
> From: Lyle
> To:
anzhonda600owners@yahoogroups.com
> Sent: Sun, April 3, 2011 3:04:04 PM
> Subject: [anzhonda600owners] Re: Spark
Plug boot grommet?
> �
> Thanks Bill & Brad, yep it looks like no grommets.
> Lyle
> --- In
anzhonda600owners@yahoogroups.com
, "Bill" wrote:
> > Lyle;
> > Go to page 57 or 58 of the Sedan Owners manual and it shows a sparkplug and > > pages 58 and 59 of the coupe Owners manual.
> > Bill
> > _____
> > From:
anzhonda600owners@yahoogroups.com
> > [mailto:
anzhonda600owners@yahoogroups.com
] On Behalf Of Lyle
> > Sent: Friday, April 01, 2011 6:19 AM
> > To:
anzhonda600owners@yahoogroups.com
> > Subject: [anzhonda600owners] Re: Spark Plug boot grommet?
> > Couldn't find any close up pictures of it.
> > Thanks
> > --- In
anzhonda600owners@yahoogroups.com
> > , brad fenn > > wrote:
> > > As I remember, there were no boots filling the
holes,it was a little open
> > around
> > > the plug connector.
> > > From: Lyle
> > > To:
anzhonda600owners@yahoogroups.com
> >
> > > Sent: Thu, March 31, 2011 9:40:19 PM
> > > Subject: [anzhonda600owners] Spark Plug boot grommet?
> > > �
> > > I was installing my engine sheet metal fan shroud covers on the side of > > the > > > cylinder head. They have large holes to allow the spark plug boots and a > > plug > > > socket to get to the plugs.
> > My question is did they have a grommet in the holes?
> > > Or was the stock boot large enough to fit the hole?
> > > Thanks
> > > Lyle