Pos-A-Traction Lug Nuts

baldwin_elias · Post by **baldwin_elias** » Mon Sep 17, 2012 6:29 pm

Could someone please tell me (or send a picture of) what the correct lug nuts look like for the Pos-A-Traction alloy Z Coupe wheels? I've got some mix-and-match hardware on mine. I noticed on each wheel two of the holes are bigger that the other two.
Also, anybody tried 165 width tires on these rims? Previous owner was running Kumho 145's (better suited to the stock rim) and I think they are too narrow. They seem to have worn quite severely along the outer edge.
Thanks,
Elias

pommecoing · Post by **pommecoing** » Tue Sep 18, 2012 7:44 am

I would appreciate such info. I've a set of Pos-A-Traction without the specific lug nuts.
Thank you

--- In
anzhonda600owners@yahoogroups.com
, "baldwin_elias" wrote:
> Could someone please tell me (or send a picture of) what the correct lug nuts look like for the Pos-A-Traction alloy Z Coupe wheels? I've got some mix-and-match hardware on mine. I noticed on each wheel two of the holes are bigger that the other two.
> Also, anybody tried 165 width tires on these rims? Previous owner was running Kumho 145's (better suited to the stock rim) and I think they are too narrow. They seem to have worn quite severely along the outer edge.
> Thanks,
> Elias

Eric Geiger · Post by **Eric Geiger** » Tue Sep 18, 2012 8:09 am

I could have swore someone had a bucket full of these lugnuts that they were talking about like 2 months ago. I'd do a search on both yahoo groups and see if you can find out who it was.
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On Sep 18, 2012, at 9:44 AM, "pommecoing" wrote:
I would appreciate such info. I've a set of Pos-A-Traction without the specific lug nuts.
Thank you
--- In
anzhonda600owners@yahoogroups.com
, "baldwin_elias" wrote:
> Could someone please tell me (or send a picture of) what the correct lug nuts look like for the Pos-A-Traction alloy Z Coupe wheels? I've got some mix-and-match hardware on mine. I noticed on each wheel two of the holes are bigger that the other two.
> Also, anybody tried 165 width tires on these rims? Previous owner was running Kumho 145's (better suited to the stock rim) and I think they are too narrow. They seem to have worn quite severely along the outer edge.
> Thanks,
> Elias

Elias Baldwin · Post by **Elias Baldwin** » Tue Sep 18, 2012 11:08 am

Here's a picture of what my wheels currently have. I think the longer nuts are original, but I have no idea what would have gone in the two smaller holes. The smaller nuts in the picture are Hardware Store Specials added by someone else.

On Tue, Sep 18, 2012 at 11:09 AM, Eric Geiger
�
> I could have swore someone had a bucket full of these lugnuts that they were talking about like 2 months ago. �I'd do a search on both yahoo groups and see if you can find out who it was.�
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX
> phone
> XXX-XXX-XXXX
> fax
> XXX-XXX-XXXX
> mobile
> egeiger@...
> www.prgnocturne.com
> On Sep 18, 2012, at 9:44 AM, "pommecoing" pomier.cohen@...
> > wrote:
> > �
> > I would appreciate such info. I've a set of Pos-A-Traction without the specific lug nuts.
> > Thank you
> > --- In
> > anzhonda600owners@yahoogroups.com
> > , "baldwin_elias" wrote:
> > > Could someone please tell me (or send a picture of) what the correct lug nuts look like for the Pos-A-Traction alloy Z Coupe wheels? I've got some mix-and-match hardware on mine. I noticed on each wheel two of the holes are bigger that the other two.
> > > Also, anybody tried 165 width tires on these rims? Previous owner was running Kumho 145's (better suited to the stock rim) and I think they are too narrow. They seem to have worn quite severely along the outer edge.
> > > Thanks,
> > > Elias

tommyjayallen · Post by **tommyjayallen** » Wed Sep 19, 2012 6:32 am

Elias,
Those nuts pictured are the correct ones for the Positraction wheels. All of the lug holes should be the same size.
I believe Miles had the bucket full of nuts mentioned .
Tad.
From:
Elias Baldwin To:
anzhonda600owners@yahoogroups.com Sent:
Tuesday, September 18, 2012 11:08 AM Subject:
Re: [anzhonda600owners] Re: Pos-A-Traction Lug Nuts [1 Attachment]
Here's a picture of what my wheels currently have. I think the longer nuts are original, but I have no idea what would have gone in the two smaller holes. The smaller nuts in the picture are Hardware Store Specials added by someone else.

On Tue, Sep 18, 2012 at 11:09 AM, Eric Geiger
I could have swore someone had a bucket full of these lugnuts that they were talking about like 2 months ago. I'd do a search on both yahoo groups and see if you can find out who it was.
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX
> phone
> XXX-XXX-XXXX
> fax
> XXX-XXX-XXXX
> mobile
> egeiger@...
> http://www.prgnocturne.com/
> On Sep 18, 2012, at 9:44 AM, "pommecoing" pomier.cohen@...
> > wrote:
> > I would appreciate such info. I've a set of Pos-A-Traction without the specific lug nuts.
> > Thank you
> > --- In
> > mailto:anzhonda600owners%40yahoogroups.com
> > , "baldwin_elias" wrote:
> > > Could someone please tell me (or send a picture of) what the correct lug nuts look like for the Pos-A-Traction alloy Z Coupe wheels? I've got some mix-and-match hardware on mine. I noticed on each wheel two of the holes are bigger that the other two.
> > > Also, anybody tried 165 width tires on these rims? Previous owner was running Kumho 145's (better suited to the stock rim) and I think they are too narrow. They seem to have worn quite severely along the outer edge.
> > > Thanks,
> > > Elias

George · Post by **George** » Wed Sep 19, 2012 8:42 am

Have a set. I'll try to get some pix today.
geo.

--- In
anzhonda600owners@yahoogroups.com
, "pommecoing" wrote:
> I would appreciate such info. I've a set of Pos-A-Traction without the specific lug nuts.
> Thank you
> --- In
anzhonda600owners@yahoogroups.com
, "baldwin_elias" wrote:
> > Could someone please tell me (or send a picture of) what the correct lug nuts look like for the Pos-A-Traction alloy Z Coupe wheels? I've got some mix-and-match hardware on mine. I noticed on each wheel two of the holes are bigger that the other two.
> > Also, anybody tried 165 width tires on these rims? Previous owner was running Kumho 145's (better suited to the stock rim) and I think they are too narrow. They seem to have worn quite severely along the outer edge.
> > Thanks,
> > Elias