roof weather stripping trim

[eric.geiger]

i posted this in the other group but as always doubling down here.
does anyone know if the roof trim on the 600 coupe is the same as on the 1st gen civics? i came across a guy who is having them re made for the 1st gen civic and he was curious if our cars used the same profile of roof trim. he's hoping he can find more people to be interested to make it cost effective. the trim would come in a continuous length and would need to be trimmed to size accordingly for your vehicle.
heres a link to a picture and thread where he is looking to gather interest. let me know if anyone knows its its the same profile. the length doesn't matter only the profile.
http://1stgencivic.com/forum/viewtopic. ... 35&t=16938
Eric

[Victor Hernandez]

Looks similar, I guess if you measure its width and it matches it should do it. I'd be a buyer for one set.

On Tue, Jan 15, 2013 at 5:59 PM, eric.geiger
�
> i posted this in the other group but as always doubling down here.
> does anyone know if the roof trim on the 600 coupe is the same as on the 1st gen civics? i came across a guy who is having them re made for the 1st gen civic and he was curious if our cars used the same profile of roof trim. he's hoping he can find more people to be interested to make it cost effective. the trim would come in a continuous length and would need to be trimmed to size accordingly for your vehicle.
> heres a link to a picture and thread where he is looking to gather interest. let me know if anyone knows its its the same profile. the length doesn't matter only the profile.
> http://1stgencivic.com/forum/viewtopic. ... 35&t=16938
> Eric

[Eric Geiger]

does anyone have one either used or NOS they could take extensive photos of preferably not installed
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Jan 15, 2013, at 6:06 PM, Victor Hernandez wrote:
> Looks similar, I guess if you measure its width and it matches it should do it. I'd be a buyer for one set.
> On Tue, Jan 15, 2013 at 5:59 PM, eric.geiger
> egeiger@...
> wrote:
> > i posted this in the other group but as always doubling down here.
> > does anyone know if the roof trim on the 600 coupe is the same as on the 1st gen civics? i came across a guy who is having them re made for the 1st gen civic and he was curious if our cars used the same profile of roof trim. he's hoping he can find more people > > to be interested to make it cost effective. the trim would come in a continuous length and would need to be trimmed to size accordingly for your vehicle.
> > heres a link to a picture and thread where he is looking to gather interest. let me know if anyone knows its its the same profile. the length doesn't matter only the profile.
> > http://1stgencivic.com/forum/viewtopic. ... 35&t=16938
> > Eric

[brad fenn]

I dont know if they are the same, but I would be in for pair. I have a pair of N.O.S. strips I bought for a Coupe, but they have been sitting around since I bought them in 82 and have rotted out.
From:
eric.geiger To:
anzhonda600owners@yahoogroups.com Sent:
Tue, January 15, 2013 5:59:33 PM Subject:
[anzhonda600owners] roof weather stripping trim
i posted this in the other group but as always doubling down here.
does anyone know if the roof trim on the 600 coupe is the same as on the 1st gen civics? i came across a guy who is having them re made for the 1st gen civic and he was curious if our cars used the same profile of roof trim. he's hoping he can find more people to be interested to make it cost effective. the trim would come in a continuous length and would need to be trimmed to size accordingly for your vehicle.
heres a link to a picture and thread where he is looking to gather interest. let me know if anyone knows its its the same profile. the length doesn't matter only the profile.
http://1stgencivic.com/forum/viewtopic. ... 35&t=16938
Eric

[Eric Geiger]

could you possibly measure them if they are worthy of being measured still.  some pictures next to a tape measure would be great too for reference.
length from end to end, width and height.
Thanks
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Jan 15, 2013, at 6:34 PM, brad fenn wrote:
> I dont know if they are the same, but I would be in for pair. I have a pair of N.O.S. strips I bought for a Coupe, but they have been sitting around since I bought them in 82 and have rotted out.
> From:
> eric.geiger egeiger@...
> To:
> anzhonda600owners@yahoogroups.com
> Sent:
> Tue, January 15, 2013 5:59:33 PM
> Subject:
> [anzhonda600owners] roof weather stripping trim
> i posted this in the other group but as always doubling down here.
> does anyone know if the roof trim on the 600 coupe is the same as on the 1st gen civics? i came across a guy who is having them re made for the 1st gen civic and he was curious if our cars used the same profile of roof trim. he's hoping he can find more people > to be interested to make it cost effective. the trim would come in a continuous length and would need to be trimmed to size accordingly for your vehicle.
> heres a link to a picture and thread where he is looking to gather interest. let me know if anyone knows its its the same profile. the length doesn't matter only the profile.
> http://1stgencivic.com/forum/viewtopic. ... 35&t=16938
> Eric

[brad fenn]

Will do as soon as I can.
From:
Eric Geiger To:
"" Sent:
Tue, January 15, 2013 6:44:51 PM Subject:
Re: [anzhonda600owners] roof weather stripping trim
could you possibly measure them if they are worthy of being measured still.  some pictures next to a tape measure would be great too for reference.
length from end to end, width and height.
Thanks
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Jan 15, 2013, at 6:34 PM, brad fenn wrote:
> I dont know if they are the same, but I would be in for pair. I have a pair of N.O.S. strips I bought for a Coupe, but they have been sitting around since I bought them in 82 and have rotted out.
> From:
> eric.geiger egeiger@...
> To:
> anzhonda600owners@yahoogroups.com
> Sent:
> Tue, January 15, 2013 5:59:33 PM
> Subject:
> [anzhonda600owners] roof weather stripping trim
> i posted this in the other group but as always doubling down here.
> does anyone know if the roof trim on the 600 coupe is the same as on the 1st gen civics? i came across a guy who is having them re made for the 1st gen civic and he was curious if our cars used the same profile of roof trim. he's hoping he can find more people > to be interested to make it cost effective. the trim would come in a continuous length and would need to be trimmed to size accordingly for your vehicle.
> heres a link to a picture and thread where he is looking to gather interest. let me know if anyone knows its its the same profile. the length doesn't matter only the profile.
> http://1stgencivic.com/forum/viewtopic. ... 35&t=16938
> Eric