Reverse Gear

[Joseph Corsinita]

I can not find the area of the book that shows how to change the reverse gear.   Where is it?  Thanks for any help.

[mterrens]

Looks like page 3 of chapter 6 of the big blue book...
http://www.honda600coupe.com/Honda_600_ ... hap_06.pdf
Steve

> ----- Original Message -----
> From:
> Joseph Corsinita
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Saturday, June 28, 2008 12:49
> PM
> Subject:
> [2cylinderhondas] Reverse
> Gear
> I can not find the area of the book that shows how to change the reverse > gear.   Where is it?  Thanks for any help.
> No virus found in this incoming message.
> Checked by AVG.
> Version: 8.0.101 / Virus Database: 270.4.2/1523 - Release Date: 6/28/2008 > 7:00 AM

[Joseph Corsinita]

Thanks:   Joe
Steven Michelsen wrote:

> Looks like page 3 of chapter 6 of the big blue book...
> http://www.honda600 coupe.com/ Honda_600_ Sedan_Shop_ Manual_chap_ 06.pdf
> Steve
> > ----- Original Message -----
> > From:
> > Joseph Corsinita
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > Sent:
> > Saturday, June 28, 2008 12:49 PM
> > Subject:
> > [2cylinderhondas] Reverse Gear
> > I can not find the area of the book that shows how to change the reverse gear.   Where is it?  Thanks for any help.
> > No virus found in this incoming message.
> > Checked by AVG.
> > Version: 8.0.101 / Virus Database: 270.4.2/1523 - Release Date: 6/28/2008 7:00 AM

[friend]

Joe;
You will need to remove the pully, starter, stator cover, stator and back cover to get at one of the bolts.   To remove the stator you will need a puller (tool) Miles is making them.
Bill Colford

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Joseph Corsinita > Sent:
> Saturday, June 28, 2008 9:49
> AM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] Reverse Gear
> I can not find the area of the book that shows how to change the reverse > gear.   Where is it?  Thanks for any help.

[Joseph Corsinita]

I managed to get to the hard to remove bolt with a thin 10mm open wrench to get off the cover.
billmyong@... wrote:

> Joe;
> You will need to remove the pully, starter, stator cover, stator and back cover to get at one of the bolts.   To remove the stator you will need a puller (tool) Miles is making them.
> Bill Colford
> > -----Original Message-----
> > From:
> > 2cylinderhondas@ yahoogroups. com [mailto:2cylinderho ndas@yahoogroups .com] > > On Behalf Of > > Joseph Corsinita > > Sent:
> > Saturday,
> > June 28, 2008 9:49 AM
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > Subject:
> > [2cylinderhondas] Reverse Gear
> > I can not find the area of the book that shows how to change the reverse gear.   Where is it?  Thanks for any help.

[friend]

You were lucky, a lot of the bolts were changed with a longer bolt.  Then it is a pain.
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Joseph Corsinita > Sent:
> Sunday, June 29, 2008 8:24
> AM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> RE:
> [2cylinderhondas] Reverse Gear
> I managed to get to the hard to remove bolt with a thin 10mm open wrench to > get off the cover.
> billmyong@earthlink .net
> wrote:
> > Joe;
> > You will need to remove the pully, starter, stator
> > cover, stator and back cover to get at one of the bolts.   To > > remove the stator you will need a puller (tool) Miles is making them.
> > Bill Colford
> > > -----Original Message-----
> > > From:
> > > 2cylinderhondas@ yahoogroups. com
> > > [mailto:2cylinderho ndas@yahoogroups .com]
> > > On Behalf Of
> > > Joseph Corsinita
> > > Sent:
> > > Saturday, June 28, 2008 9:49
> > > AM
> > > To:
> > > 2cylinderhondas@ yahoogroups. com
> > > Subject:
> > > [2cylinderhondas] Reverse Gear
> > > I can not find the area of the book that shows how to change the > > > reverse gear.   Where is it?  Thanks for any help.

[friend]

I have some Complimentary registration forms (that's free)  for the National City "Automobile Heritage Day" 3 August 08 (that's in San Diego).  Their website seems to be broken so let me know if you want to enter and I will send you a registration form.
Bill Colford

[mikealvarenga]

--- In 2cylinderhondas@yahoogroups.com, wrote:

> I have some Complimentary registration forms (that's free) for the National
> City "Automobile Heritage Day" 3 August 08 (that's in San Diego). Their
> website seems to be broken so let me know if you want to enter and I will
> send you a registration form.
> Bill Colford

Hi ,thanks for offering the forms ,can you posted online so everone can
download them?, otherwise if you can send me one, please?, thanks,
Miguel.