New member

[lyletrudell]

Hi everyone, this looks like a good place for some help and meeting some classic Honda owners. When I was a kid about 12, I saw a brand new yellow coupe. I thought that was a cool car....
Just bought a couple Coupes, a blue one in poor shape and a Orange one in good shape and running poorly....bad gas.
Will be stripping and rebuilding the Orange one first.
Fuel tank is out and being cleaned and coated.
The brake and fuel systems are out and I am working on them.
Will be searching for a fuel pump and brake parts if still available.
Rubber parts will be next.
I am a CNC machine shop owner in Clearwater, FL.
I enjoy working on unusual cars, have an Opel GT and a Triumph TR3.
Look forward to working with you, and learning about the mini Honda.
Lyle

[TOM THIES]

Welcome Lyle
you are at the right place.  Watch Ebay for some of the parts you may need but we have here a couple that have access to the rubber parts, brake parts and rebuild master cylinders, rear shocks,  carpet sets and more.
some places to check out are.
http://www.600miles.com/
http://www.honda600shop.com/
http://www.honda600coupe.com/Manuals,_b ... ments.html
there is a huge amount of info there plus I am sure there is other places the people will post.  If you need help with anything please do a search first here in the fourms to see if you can find it.  If you cant than just ask.

> ----- Original Message -----
> From:
> lyletrudell
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Wednesday, April 14, 2010 8:50
> PM
> Subject:
> [2cylinderhondas] New
> member
> Hi everyone, this looks like a good place for some help and meeting some > classic Honda owners. When I was a kid about 12, I saw a brand new yellow > coupe. I thought that was a cool car....
> Just bought a couple Coupes, a
> blue one in poor shape and a Orange one in good shape and running > poorly....bad gas.
> Will be stripping and rebuilding the Orange one
> first.
> Fuel tank is out and being cleaned and coated.
> The brake and fuel
> systems are out and I am working on them.
> Will be searching for a fuel pump
> and brake parts if still available.
> Rubber parts will be next.
> I am a
> CNC machine shop owner in Clearwater, FL.
> I enjoy working on unusual cars,
> have an Opel GT and a Triumph TR3.
> Look forward to working with you, and
> learning about the mini Honda.
> Lyle