Sometime last year I purchased a Z600 coupe with 34,000 miles. I am
looking for someone with experience working on these little cars. The
car overall is in good shape with plastic still on the doors. The
engine runs rough(no smoke). The tranny shifts smooth. No rust and
the body is straight. I just need someone that is willing to go
through the car from top to bottom and make sure that it is in tip
top
shape.I can have the cosmetics done here, it's the mechanical I need
help with. I live in Texas but I would be happy to trailer it where
ever. Heck,I need an excuse to get out of town for a week or so
anyway.
Let me know.
Frank
Looking for someone to rebuild my Z600 coupe
-
frankaritz1
- Posts: 0
- Joined: Sun Jun 26, 2005 4:45 am
Re: Looking for someone to rebuild my Z600 coupe
It's a toss up - are you closer to South Carolina or California?
Re: Looking for someone to rebuild my Z600 coupe
Hi Frank;
I can give you a list of owners in Texas if you send the chassis, engine
and date of manufacture numbers.
Bill Colford
Honda 600 roster of owners
I can give you a list of owners in Texas if you send the chassis, engine
and date of manufacture numbers.
Bill Colford
Honda 600 roster of owners
-
club_hondafr
- Posts: 0
- Joined: Wed Apr 24, 2002 1:45 pm
Re: Looking for someone to rebuild my Z600 coupe
Hey Bill,
I send you my numbers a week or so ago. Any info on
them? I can re-send if needed.
Thanks,
Jayson
--- Bill Colford wrote:
I send you my numbers a week or so ago. Any info on
them? I can re-send if needed.
Thanks,
Jayson
--- Bill Colford wrote:
> Hi Frank;
> I can give you a list of owners in Texas if you
> send the chassis, engine
> and date of manufacture numbers.
> Bill Colford
> Honda 600 roster of owners
> -----Original Message-----
> From:
anzhonda600owners@yahoogroups.com
> [mailto:
anzhonda600owners@yahoogroups.com
]On Behalf
> Of frankaritz1
> Sent: Sunday, June 26, 2005 12:45 PM
> To:
anzhonda600owners@yahoogroups.com
> Subject: [anzhonda600owners] Looking for someone to
> rebuild my Z600
> coupe
> Sometime last year I purchased a Z600 coupe with
> 34,000 miles. I am
> looking for someone with experience working on these
> little cars. The
> car overall is in good shape with plastic still on
> the doors. The
> engine runs rough(no smoke). The tranny shifts
> smooth. No rust and
> the body is straight. I just need someone that is
> willing to go
> through the car from top to bottom and make sure
> that it is in tip
> top
> shape.I can have the cosmetics done here, it's the
> mechanical I need
> help with. I live in Texas but I would be happy to
> trailer it where
> ever. Heck,I need an excuse to get out of town for a
> week or so
> anyway.
> Let me know.
> Frank
Re: Looking for someone to rebuild my Z600 coupe
Yes, send again. I did not receive them.
Bill
Bill
-
club_hondafr
- Posts: 0
- Joined: Wed Apr 24, 2002 1:45 pm
My Chassis and Engine numbers for Bill
Hi Bill,
It appears that I have the removable plates/tags from
one car but the chassis and engine of another car.
This is what I have:
Drivers door plate: ANXXX-XXX-XXXX
Stamped into firewall: ANXXX-XXX-XXXX
Passenger front wing plate:
Chassis: ANXXX-XXX-XXXX
Engine: AN600E-1511982
Dash plate: ANXXX-XXX-XXXX
Actual Engine No.: AN600E-1056422
Let me know if you find anything.
-Jayson
It appears that I have the removable plates/tags from
one car but the chassis and engine of another car.
This is what I have:
Drivers door plate: ANXXX-XXX-XXXX
Stamped into firewall: ANXXX-XXX-XXXX
Passenger front wing plate:
Chassis: ANXXX-XXX-XXXX
Engine: AN600E-1511982
Dash plate: ANXXX-XXX-XXXX
Actual Engine No.: AN600E-1056422
Let me know if you find anything.
-Jayson