Hi
Looking at the threads it is confusing who owns this car. But, take a look at the file on the points braker plate fix. I think your problem is in the braker plate not adjusting properly when it's advancing.
Bill Colford
> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Bill > Sent:
> Thursday, September 28, 2006 11:18
> AM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> [2cylinderhondas] Anyone ran into this yet?
> Still trying to figure out why my z600 won't run good after 30mph.
> Took
> the cover off to check the chain and at some point someone has > scribed a > new line on my cam sprocket. Please look at the pics in > Bills Car Sow album > and tell me what to do. The pictures were taken > with the notch on the > pulley at the T mark so the line on the sprocket > should be level with the > engine. It looks like neither line is where > it should be. Records indicate > new chsin was installed about 10,000 > miles ago.
> Need advice quick or I
> might sell. Getting frustrated!
> Also how do I adjust the chain if it has
> jumped a link? Thanks,
> Bill in Missouri
Is there a way to check to see if this is bad and why would you think
that it is my plate when the pictures show that my chain is not set
right? The car is mine and I have attempted two time to get on the
roster with no luck. Thanks for your input,
Bill in Missouri
--- In anzhonda600owners@yahoogroups.com
, wrote:
> Hi
> Looking at the threads it is confusing who owns this car. But,
take a
> look at the file on the points braker plate fix. I think your
problem is in
> the braker plate not adjusting properly when it's advancing.
> Bill Colford
> -----Original Message-----
> From: 2cylinderhondas@yahoogroups.com
> [mailto: 2cylinderhondas@yahoogroups.com
]On Behalf Of Bill
> Sent: Thursday, September 28, 2006 11:18 AM
> To: 2cylinderhondas@yahoogroups.com
> Subject: [2cylinderhondas] Anyone ran into this yet?
> Still trying to figure out why my z600 won't run good after 30mph.
> Took the cover off to check the chain and at some point someone has
> scribed a new line on my cam sprocket. Please look at the pics in
> Bills Car Sow album and tell me what to do. The pictures were taken
> with the notch on the pulley at the T mark so the line on the sprocket
> should be level with the engine. It looks like neither line is where
> it should be. Records indicate new chsin was installed about 10,000
> miles ago.
> Need advice quick or I might sell. Getting frustrated!
> Also how do I adjust the chain if it has jumped a link? Thanks,
> Bill in Missouri