Hey guys I need a little help, I had to remove the engine from my car on Saturday to remove 2 sheared bolts from the block where the lower fan shroud attaches to the block. We got the bolts out using an easy out and got the engine put back together and running yesterday. The problem is the Charge light is now on and I can't figure out why. I connected the wires pretty much the only way they could be but after looking at other posts on the forum I'm kinda confused. The posts I read say that there are 4 wires coming out of the generator but mine has 2, a black and a white w/red stripe. The loom from the rectifier has 3 wires, a black a white w/red stripe and a white w/ black stripe that isn't connected to anything. The car ran great with no problems other than a rattley shroud till now. Any help would be great.
Mark Stearns
70 n600 sedan